GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-B075-AA-EN

The Allen Bradley enclosure drive is rated for IP20, Catalog ID 1336F-B075-AA-EN. This Bulletin-1336F drive is manufactured with the English Language as default. A nominal horsepower of 75HP is recorded along with the three-phase 380-480 Volts AC rating. The drive can handle input frequencies between 47 and 63 Hertz. The drive trips when the input voltage hits 570 Volts AC; the maximum input voltage supported is 528 Volts AC. The drive trips when the input voltage drops below 280 Volts AC, and the lowest input voltage supported is 342 Volts AC.

1336F-B075-AA-EN-GMS6-L4

Part number 1336F-B075-AA-EN-GMS6-L4 is an Allen Bradley 1336 PLUS II-series adjustable frequency drive. It has an input voltage rating of 380 volts AC to 480 volts AC. Additionally, it outputs 75 horsepower of power. This drive features a TTL contact control interface. The enclosure of the 1336F-B075-AA-EN-GMS6-L4 is classified as an IP20-rated NEMA Type 1 enclosure.

1336F-B075-AA-EN-HAS1

A variable frequency AC drive, the 1336F-B075-AA-EN-HAS1 was produced by Allen Bradley as part of the 1336 PLUS II product series. This device outputs 75 horsepower of power at a rated input voltage of 380 to 480 volts AC. The 1336F-B075-AA-EN-HAS1 is protected via a NEMA type 1 enclosure with an IP 20 protection rating. This product is typically used to control a motor's speed and frequency for various applications.

1336F-B075-AA-EN-HAS2-L6

The Allen-Bradley/Rockwell Automation 1336F-B075-AA-EN-HAS2-L6 adjustable frequency drive is a 1336 PLUS II drive with SVC or sensorless vector control technology. This adjustable frequency drive has an output rating of 56 kilowatts or 75 Horsepower and it runs on a voltage range of 380 to 480 volts AC. It is housed by an IP 20 (NEMA 1) enclosure. It has a digital potentiometer which is provided by its HMI and it has an AC control interface rated for 115 Volts input.

1336F-B075-AA-EN-HCS1-L6

The Allen-Bradley 1336F-B075-AA-EN-HCS1-L6 drive is an industrial motor control device. Its adjustable frequency and selectable control technology allow it to meet various motor control application needs easily. The 1336F-B075-AA-EN-HCS1-L6 drive is a member of the 1336 Plus II motor control drive series. It can operate with a voltage range of 380 Volts AC to 480 Volts AC. The drive also operates with 56 kilowatts or 75 Horsepower of output. This motor control drive is installed in an IP 20 enclosure.

1336F-B075-AE-EN

The Allen-Bradley 1336F-B075-AE-EN adjustable frequency drive is a 1336 PLUS II adjustable frequency drive. It features an operating voltage range of 380 to 480V AC, and it features a nominal HP output rating of 75 HP. The drive has an input kVA range of 69-87 kVA, input current rating of 105A, an output kVA rating of 84 kVA, and an output current rating of 106A with constant torque.

1336F-B075-AN-EN

The 1336F-B075-AN-EN, which was manufactured by Allen-Bradley, is an AC drive. The purpose of this drive is to control the speed of motors for various applications. With an input range of 380 to 480 VAC, the 1336F-B075-AN-EN can output 56 kilowatts or 75 horsepower of power. It has an open-style enclosure with an IP 00 protection rating.

1336F-B075-AN-EN-HAS1-L6

Part number 1336F-B075-AN-EN-HAS1-L6 is an Adjustable Frequency AC drive from the 1336 PLUS II line of Allen-Bradley products. The rated power output of this device is 75 horsepower or 56 kilowatts. Additionally, the input voltage rating of the 1336F-B075-AN-EN-HAS1-L6 is 380 to 480 volts AC. This drive is generally used to control the speed and frequency of motors for different applications.

1336F-B100-AA-EN

The 1336F-B100-AA-EN is a motor control drive from the Allen-Bradley 1336 Plus II drive series. It controls motors with its adjustable frequency. The operating voltage range for the 1336F-B100-AA-EN is from 380 to 480 Volts AC with a +/-10% fluctuation rating. The output rating of the 1336F-B100-AA-EN in normal duty applications is 75 kW or 100 Hp. The 1336F-B100-AA-EN can be customized with interface devices, but it does not come with built-in interfaces.

1336F-B100-AA-EN-HAS1-L6

The 1336F-B100-AA-EN-HAS1-L6 adjustable frequency drive is usually used with 3-phase induction motors. It is designed to function with 380 to 480 Volts AC and the voltage must be 3-phase voltage. It is an Allen-Bradley 1336 Plus II series drive. The drive's enclosure has an IP 20 rated level of environmental protection. The drive's nominal output rating is 75 kilowatts (100 Horsepower). The 1336F-B100-AA-EN-HAS1-L6 drive has organized parameters that make the drive easy to program. The 1336F-B100-AA-EN-HAS1-L6 drive's parameters are organized in groups.

1336F-B100-AN-EN

Part number 1336F-B100-AN-EN is an Allen Bradley 1336 PLUS II-series AC drive. The voltage rating of this device is 380 volts AC to 480 volts AC. In addition, the output power rating of the 1336F-B100-AN-EN is 100 horsepower or 75 kilowatts. It has an open-type enclosure with an IP 00 Ingress Protection rating. Additionally, this drive has a size "D" frame. It is typically used to control the speed of motors for various applications.

1336F-B100-AN-EN-HAS2-LA2-LA3-L6

The Allen-Bradley 1336 Plus II series 1336F-B100-AN-EN-HAS2-LA2-LA3-L6 drive controls industrial motors. It is compatible with 3-phase AC voltage. The Allen-Bradley 1336F-B100-AN-EN-HAS2-LA2-LA3-L6 variable frequency drive operates at AC voltage rating of 380 to 480 Volts (3-phase) with 47 to 63 Hertz of input frequency. In a normal duty motor control application, this drive produces 100 Horsepower or 75 kilowatts.

1336F-B100-AN-EN-L6

Product number 1336F-B100-AN-EN-L6 is a 1336 PLUS II Adjustable Frequency AC Drive. It was designed by Allen-Bradley/Rockwell Automation. The input voltage range of this drive is 380 - 480 volts AC. In addition, this product outputs 100 horsepower (75 kilowatts) of power. The 1336F-B100-AN-EN-L6 includes a control interface with a 115-volt AC voltage rating.

1336F-B125-AA-EN

The Allen-Bradley 1336F-B125-AA-EN motor control drive comes with insulated gate bipolar transistors (IGBTs). This 1336 Plus II series drive uses its IGBTs to control a motor quietly. The 1336F-B125-AA-EN motor control drive can operate at a high switching speed. Its output rating is 125 Horsepower or 93 kilowatts. Additionally, the 1336F-B125-AA-EN drive is a 3-phase AC drive rated for 380 to 480 Volts of input.

1336F-B125-AA-EN-GM1-HASP

The 1336F-B125-AA-EN-GM1-HASP from Allen-Bradley is a part of the 1336 Plus II product line and has output power ratings of 93 kW or 125 HP. The 1336F-B125-AA-EN-GM1-HASP drive is designed to use three-phase input voltage in the range of 380-480V AC to operate. The drive can operate with 2 types of torque, which are constant torque and variable torque. It comes with a communication interface that supports Remote I/O communication and an HMI which is a programmer-only device.

1336F-B125-AA-EN-GM1-HCS1

Catalog number 1336F-B125-AA-EN-GM1-HCS1, which was produced by Allen Bradley, is a variable frequency AC drive. It is included in the 1336 PLUS II product series. The 1336F-B125-AA-EN-GM1-HCS1 drive has an output of 93 kilowatts or 125 horsepower and requires an input voltage of 380 to 480 volts AC. The drive has an IP 20, NEMA Type 1 enclosure.

1336F-B125-AA-EN-GM1-HCS2

Produced by Allen Bradley, part number 1336F-B125-AA-EN-GM1-HCS2 is a variable frequency drive. It is featured in the 1336 PLUS II line of products. The voltage rating of this device is 380 VAC to 480 VAC. Additionally, the 1336F-B125-AA-EN-GM1-HCS2 produces 125 Hp or 93 kW of output power. This drive is housed in a NEMA type 1 enclosure with an IP20 protection rating.

1336F-B125-AA-EN-LA4-L4

The 1336F-B125-AA-EN-LA4-L4 adjustable frequency drive by Allen-Bradley is powerful enough to generate 125 Horsepower when it operates at 380-480V AC 3-phase voltage in normal duty types of applications. This 1336 PLUS II drive supports a control interface that has a TTL contact feature and it also has a NEMA 1 enclosure. The 1336F-B125-AA-EN-LA4-L4 drive also hosts an analog interface module with 1 input channel and 1 output channel that are isolated.

1336F-B125-AA-EN-Q

Part number 1336F-B125-AA-EN-Q is an AC drive manufactured by Allen Bradley. The input voltage rating of this device is 380 to 480 volts AC. In addition, the 1336F-B125-AA-EN-Q outputs 125 horsepower or 93 kilowatts of power. This product is housed in an IP 20-rated NEMA type 1 enclosure. This drive is typically utilized for applications requiring motor speed and frequency control.

1336F-B125-AN-EN

The Allen-Bradley 1336F-B125-AN-EN is a variable frequency drive belonging to the 1336 PLUS II line of products. This drive operates at an input voltage ranging from 380 to 480 volts AC. This product produces 125 horsepower or 93 kilowatts of output power. The 1336F-B125-AN-EN has an open-style enclosure with an IP00 protection rating.

1336F-B125-AN-EN-L6

Product number 1336F-B125-AN-EN-L6 is a 1336 PLUS II-series Adjustable Frequency AC Drive. It was manufactured by Allen Bradley. The voltage rating of this device ranges from 380 to 480 volts AC. In addition, this drive outputs 93 kilowatts (125 horsepower) of power. The 1336F-B125-AN-EN-L6 features a control interface with a 115-volt AC rating.

1336F-B150-AE-EN

Manufactured by Allen-Bradley/Rockwell Automation, catalog number 1336F-B150-AE-EN is an AC drive. This device is powered via a rated input voltage of 380 to 480 volts AC. Additionally, this drive has a rated power output of 150 horsepower or 112 kilowatts. For protection against environmental hazards, the 1336F-B150-AE-EN is equipped with an IP20-rated NEMA Type 1/EMC enclosure.

1336F-B150-AN-EN

The 1336F-B150-AN-EN from Allen Bradley is a variable frequency drive. It is featured in the 1336 PLUS II line of products. It has a voltage rating of 380 - 480 volts AC. Additionally, the output power rating of this drive is 112 kilowatts or 150 horsepower. It has an open-style enclosure with an IP00 protection rating.

1336F-B150-AN-EN-L6

The Allen Bradley 1336F-B150-AN-EN-L6 is a variable frequency drive from the 1336 PLUS II product series. This product is powered via an input voltage ranging from 380-480 volts AC. In addition, the 1336F-B150-AN-EN-L6 outputs 150 horsepower. It features a 115-volt AC control interface. The enclosure of this drive is classified as an open-style enclosure with an IP00 protection rating.

1336F-B150-AN-EN-LA4-L6

The 1336F-B150-AN-EN-LA4-L6 operates with a nominal output rating of 112 kilowatts and a voltage rating of 380 to 480 Volts AC. The 1336F-B150-AN-EN-LA4-L6 is an Allen-Bradley/Rockwell Automation drive available in the 1336 PLUS II series. The drive uses English as its default language and it has an open enclosure. The 1336F-B150-AN-EN-LA4-L6 drive has an analog I/O interface and a control interface. The analog interface has 1 output and 1 input and the control interface uses AC voltage.

1336F-B200-AA-EN-GM5-L4

Product number 1336F-B200-AA-EN-GM5-L4 is an Allen Bradley/Rockwell Automation AC drive. It is featured in the 1336 PLUS II series of products. This drive operates via an input voltage rated at 380 to 480 volts AC. Additionally, the 1336F-B200-AA-EN-GM5-L4 produces 149 kilowatts or 200 horsepower of output power. The enclosure of this product is an IP20-rated NEMA type 1 enclosure.

1336F-B200-AA-EN-GMS6-L4

Produced by Allen-Bradley, part number 1336F-B200-AA-EN-GMS6-L4 is a 1336 PLUS II-series AC drive. This device has a voltage rating of 380 volts AC to 480 volts AC. Additionally, this drive produces 200 horsepower or 149 kilowatts of power. The 1336F-B200-AA-EN-GMS6-L4 is typically used to control the speed and frequency of motors for different applications. The enclosure of this drive is classified as a NEMA Type 1 enclosure with an IP20 protection rating.

1336F-B200-AA-EN-HA2-L6

The 1336F-B200-AA-EN-HA2-L6 by Allen-Bradley is a variable frequency drive from the 1336 PLUS II product line. This variable frequency drive is built with several standard features that are easy to program. It also includes 2 optional interface features and it can host additional optional accessories as well. The 1336F-B200-AA-EN-HA2-L6 drive's control interface operates with 115V AC, and its HMI needs a communication cable to operate. The horsepower output rating for the 1336F-B200-AA-EN-HA2-L6 drive is 200 Horsepower. This drive has an industrial-grade IP20 enclosure.

1336F-B200-AN-EN

The 1336F-B200-AN-EN variable frequency drive is an Allen-Bradley 1336F Plus II AC drive with a nominal output rating of 149 kilowatts or 200 Horsepower. This device can operate 3-phase induction motors at various speeds by making changes to its output frequency (the available output frequency range is 0 to 400 Hertz). This drive runs on an AC voltage range of 380 to 480 Volts. The 1336F-B200-AN-EN drive is an open drive and it has no interfaces.

1336F-B200-AN-EN-HAS2-L6

Produced by Allen Bradley, part number 1336F-B200-AN-EN-HAS2-L6 is an AC drive with a 380-480 VAC input voltage rating. The output power rating of this device is 200 Hp or 149 kW. It has an open-style enclosure with an Ingress Protection rating of IP 00. The 1336F-B200-AN-EN-HAS2-L6 features a 115 VAC control interface.

1336F-B200-AN-EN-L6

The 1336F-B200-AN-EN-L6 from Allen-Bradley/Rockwell Automation is a 1336 PLUS II AC drive. The voltage rating of this device is 380-480V AC. Additionally, the rated power output of this product is 200 Hp or 149 kW. The 1336F-B200-AN-EN-L6 features a 115V AC control interface. Furthermore, it has an open-style enclosure with an IP 00 protection rating.

1336F-BRF05-AA-EN

The Allen Bradley 1336F-BRF05-AA-EN is an AC drive with an IP20-rated NEMA type 1 enclosure. The voltage rating of this device is 380 volts AC to 480 volts AC or 513 volts DC to 620 volts DC. Additionally, the 1336F-BRF05-AA-EN has a rated power output of 0.37 kilowatts or 0.5 horsepower. The physical dimensions of this product measure 290 mm x 215.9 mm x 160 mm (H x W x D).

1336F-BRF05-AA-EN-GMS5-L4

The 1336F-BRF05-AA-EN-GMS5-L4 drive from Allen-Bradley is a motor control drive that provides excellent torque performance and that supports customizable motor control options. This 1336 PLUS II drive can control motors with its default Volts/Hertz option or with its selectable sensorless vector control option. The 1336F-BRF05-AA-EN-GMS5-L4 drive operates at 380 to 480 Volts AC or at 513 to 620 Volts DC depending on the application. Its IP 20-rated NEMA 1 enclosure provides the most basic level of industrial ingress protection. The nominal output power rating of the 1336F-BRF05-AA-EN-GMS5-L4 drive is only 0.37 kW or 0.5 HP.

1336F-BRF05-AA-EN-HAS1-L6E

The Allen-Bradley 1336F-BRF05-AA-EN-HAS1-L6E adjustable frequency AC drive is available from the 1336 PLUS II series. This drive can handle 2 input voltages ranges which are 380 to 480 Volts AC or 513 to 620 Volts DC. The 1336F-BRF05-AA-EN-HAS1-L6E drive's output power ratings are low. It only generates 0.37 kW or 0.5 HP in normal duty applications. The drive has an encoder feedback feature on its control interface and an analog potentiometer feature on its HMI.

1336F-BRF05-AA-EN-HAS2-L4

The 1336F-BRF05-AA-EN-HAS2-L4 is a variable frequency drive designed by Allen-Bradley in the 1336 Plus II series. The unit has an IP 20, NEMA type 1 enclosure that can be used indoors but not outdoors. The users should keep this drive away from harmful substances that might damage it because its IP 20 enclosure can only protect it from small amounts of dust. The input voltage rating of the 1336F-BRF05-AA-EN-HAS2-L4 drive is either 380-480V AC or 513-620V DC and the drive can produce 0.37 kW (0.5 HP) of nominal output power.

1336F-BRF05-AA-EN-HASB-L6

The Allen-Bradley 1336F-BRF05-AA-EN-HASB-L6 variable frequency drive from the Allen-Bradley 1336 Plus II product line delivers superior and reliable motor control in a range of applications that need motor torque and speed control. This drive has an IP 20 (NEMA 1) protective enclosure and it operates at either a 3-phase AC input voltage range of 380 to 480 Volts or at a DC input voltage range of 513 to 620 Volts. It also operates with a drive output rating of 0.37 kilowatts (0.5 Horsepower). Its efficiency rating is 97.5% maximum. The 1336F-BRF05-AA-EN-HASB-L6 drive's maximum short circuit current rating is 200,000 Amps.

1336F-BRF05-AA-EN-HCS2-L6

The 1336F-BRF05-AA-EN-HCS2-L6 is an AC/DC drive from the Allen-Bradley 1336 Plus II series. It has a nominal HP output rating of 0.5 HP, a control interface that operates at 115V AC, and its input voltage ranges are 380 to 480V AC or 513 to 620V DC. Moreover, its human-machine interface is a programmer/controller type of HMI that has a digital potentiometer and the ability to upload and download application data. Additionally, the 1336F-BRF05-AA-EN-HCS2-L6 drive operates at an input frequency range of 47 to 63 Hertz.

1336F-BRF05-AA-EN-HCS2-L9E

The 1336F-BRF05-AA-EN-HCS2-L9E variable or adjustable frequency drive from the Allen-Bradley 1336 Plus II family can function with an AC power supply or a DC power supply. Its input power ratings are 380 to 480V AC or 513 to 620V DC. Its control interface comes with a feedback encoder which can support encoder loss detection and its HMI has a digital type of potentiometer. The HMI also has upload capabilities and download capabilities. The nominal output rating of the 1336F-BRF05-AA-EN-HCS2-L9E drive is 0.5 Horsepower (0.37 kilowatts).

1336F-BRF05-AE-EN

The 1336F-BRF05-AN-EN drive was designed by Allen-Bradley and it is a product of the 1336 Plus II line of Allen-Bradley motor control drives. This unit can operate with a voltage range between 380 and 480V AC or 513 and 620V DC. Its maximum nominal output rating is only 0.5 Horsepower. In addition, the 1336F-BRF05-AE-EN drive has a NEMA 1 (IP 20) enclosure that is also EMC-rated.

1336F-BRF05-AN-EN

The 1336F-BRF05-AE-EN is an AC/DC-powered drive from the Allen-Bradley 1336 Plus II drive series. The unit is enclosed in an IP 20 and EMC-rated NEMA 1 enclosure for protection from pollutants in its environment. This drive has a safety feature that detection several common errors and trips the drive to protect it from these errors. The 1336F-BRF05-AN-EN drive's AC voltage range is 380 to 480 Volts. Its DC voltage range is 513 to 620 Volts. It generates 0.5 Horsepower of output.

1336F-BRF05-AN-EN-L6

The 1336F-BRF05-AN-EN-L6 is a drive known as a motor control drive because it can adjust the speed and torque of an industrial motor. This drive is part of the Allen-Bradley 1336 Plus II series. It has a 380-480V AC or 513/620V DC input voltage rating and an output power rating of 0.5 Horsepower or 0.37 kilowatts. Because this module has a NEMA type 1 (IP 20) enclosure, it should only be used in clean indoor environments and it should be used and stored at the correct temperatures.

1336F-BRF05-AN-EN-LA4-L6

The 1336F-BRF05-AN-EN-LA4-L6 is a variable frequency drive (VFD) from the Allen-Bradley 1336 Plus II series. This drive can control the torque and speed of motors. It requires an input voltage range of 380 to 480V AC or of 513 to 620V DC. Additionally, the 1336F-BRF05-AN-EN-LA4-L6 drive has 1 isolated configurable input and output and an AC-powered control interface. Additionally, this device can endure temperatures between 0 and 50 degrees Celsius when it operates.

1336F-BRF07-AA-EN

The 1336F-BRF07-AA-EN is an Allen-Bradley industrial drive from the 1336 Plus II series. This drive supports a configurable output voltage range of 0 to the rated voltage and an output frequency range of 0 to 400 Hz. Its input voltage ranges are 513 to 620V DC and 380 to 480V AC. It uses a sine-coded PWM control signal with a programmable carrier frequency range of 2 to 10 kHz to control motors. The 1336F-BRF07-AA-EN drive has an IP 20 NEMA 1 enclosure.

1336F-BRF07-AA-EN-GMS5

Product number 1336F-BRF07-AA-EN-GMS5 is a variable frequency drive manufactured by Allen Bradley. This unit is included in the 1336 PLUS II line of products. It has an IP20-rated NEMA Type 1 enclosure. The input voltage of the 1336F-BRF07-AA-EN-GMS5 is rated at 380 VAC to 480 VAC or 513 VDC to 620 VDC. Additionally, this drive's power output is rated at 0.56 kW or 0.75 Hp.

1336F-BRF07-AN-EN-HCS2-L6

The 1336F-BRF07-AN-EN-HCS2-L6 is a variable frequency drive that operates on a voltage range between 380 and 480V AC or between 513 and 620V DC. It is designed by Allen-Bradley/Rockwell Automation, and it is manufactured within the 1336 Plus II product series. Under normal operation, it produces 0.56 kilowatts of output power and it has a 115V AC control interface. The HMI on the 1336F-BRF07-AN-EN-HCS2-L6 drive supports uploading/downloading functions, programmer functions, control functions, and a digital potentiometer.

1336F-BRF100-AA-EN

The 1336F-BRF100-AA-EN is an AC drive from the Allen-Bradley 1336 Plus II series. Its enclosure type is IP 20 (NEMA 1). It can operate with 380 to 480V AC or 513 to 620V DC. The 1336F-BRF100-AA-EN drive produces 7.5 kW or 10 HP of nominal output power. The 1336F-BRF100-AA-EN drive has slots for hosting interfaces, but it does not come with any interfaces.

1336F-BRF100-AA-EN-GMS1

The 1336F-BRF100-AA-EN-GMS1 is an Allen-Bradley industrial drive for controlling motors. It is part of the 1336 Plus II series of Allen-Bradley drives. The unit operates with a 380-480V AC or 513-620V DC voltage rating. It has a NEMA type 1 industrial enclosure with an IP 20 protection rating and it has Remote I/O communication interface with a snap-in cradle. The output power rating of the 1336F-BRF100-AA-EN-GMS1 drive during normal use is 7.5 kW or 10 HP.

1336F-BRF100-AA-EN-GMS1-L5

The 1336F-BRF100-AA-EN-GMS1-L5 is a variable frequency drive from Rockwell Automation and Allen-Bradley. The 1336 Plus II series drive can operate with AC or DC voltage. It comes with a control interface and a Remote I/O communication module that has a snap-in cradle. The unit has a NEMA 1 (IP 20) indoor-rated enclosure, and the control interface operates at 24V (AC and DC). The 1336F-BRF100-AA-EN-GMS1-L5 drive operates with 380-480V AC or 513-620V DC and it produces 7.5 kW/10 HP of output power.

1336F-BRF100-AA-EN-GMS6

Part number 1336F-BRF100-AA-EN-GMS6 is a variable frequency drive belonging to the 1336 PLUS II series of Allen-Bradley products. It has a NEMA Type 1 enclosure with an IP20 protection rating. This device includes a human-machine interface (HMI). The input voltage rating of the 1336F-BRF100-AA-EN-GMS6 is 380 to 480 volts AC or 513 to 620 volts DC. Furthermore, its output power rating is 100 horsepower.

1336F-BRF100-AA-EN-HAS1

The 1336F-BRF100-AA-EN-HAS1 from Allen Bradley is a variable frequency drive. This device is featured in the 1336 PLUS II series of products. The input voltage of this unit ranges from 380 to 480 volts AC or 513 to 620 volts DC. Additionally, it has an output power rating of 75 kilowatts (100 horsepower). The enclosure of the 1336F-BRF100-AA-EN-HAS1 is classified as a NEMA Type 1 enclosure with a protection rating of IP 20.
Previous 1

...

18

19

20

...

27 Next

Displaying 50 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP