GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-BRF20-AN-EN910-HAS1-L6

The 1336F-BRF20-AN-EN910-HAS1-L6 is a variable-speed drive from Allen Bradley's 1336 Plus II series. It is applied to 3-phase induction motors for velocity and voltage control applications. The drive can optimize the power consumption of its compatible motor devices with its intelligent use of control algorithms, feedback encoder, and HMI components. It contains an IP00 (open) enclosure, so it should be used indoors and must not come in direct contact with harmful substances.

1336F-BRF20-AN-EN-GMS1

The 1336F-BRF20-AN-EN-GMS1 is a 1336 Plus II adjustable frequency drive designed to control the speed and frequency of 3-phase induction motors. It can improve the performance of motor applications by regulating voltage and frequency. It comes in an IP00 (open) enclosure with a GM1 snap-in cradle communication option. It supports a voltage range of 380 to 480VAC and 512 - 620VDC and has a 2HP normal duty power rating. The drive also offers high-precision frequency accuracy of +/-0.01% and +/-0.4%.

1336F-BRF20-AN-EN-HAS2-L6E

The Allen Bradley 1336F-BRF20-AN-EN-HAS2-L6E is a 3-phase AC drive designed to control and optimize the operation of induction motors. It regulates voltage and speed to improve power usage and supports control algorithms and offers HMI capabilities to enhance motor performance. The drive has a 2 HP power rating. It operates within 380 to 480V AC or 513 to 620V DC, with a 10% voltage tolerance. It is a reliable solution for controlling and improving the performance of induction motors.

1336F-BRF20-AN-EN-HASB-L4

The 1336F-BRF20-AN-EN-HASB-L4 is a variable frequency drive from Allen Bradley/ Rockwell Automation. It regulates motor speed and frequency using its control functions and comes with an IP00-rated (open) enclosure. This unit also features HMI components and various safety features to protect its compatible motors. It can handle input voltage ratings of 512 to 620V DC or 380 to 480V AC (3-phase) and produces a normal duty (ND) output rating of 1.5 kilowatts / 2 horsepower.

1336F-BRF20-AN-EN-HCS2-LA1-L6

The 1336F-BRF20-AN-EN-HCS2-LA1-L6 is an adjustable frequency drive from Allen Bradley/ Rockwell Automation, part of the 1336 Plus II series. With an input power of 380/480V AC, it generates 1.5 kW / 2 HP of normal duty output power. The drive is programmed in English and has an IP00 (open) enclosure. And its constant torque ratings for the drive are 3 to 3.7 kVA for input, 4.6 Amperes for input, 3 kVA for output, and 3.8 Amperes for output.

1336F-BRF20-AN-EN-L6

Part Number 1336F-BRF20-AN-EN-L6 is a Motor Drive from 1336F Bulletin by Allen Bradley. It is designed to control and optimize 3-phase induction motors. It can handle an input voltage range of 380 to 480 Volts AC at 47 to 63 Hz and has an output rating of 1.5 kilowatts / 2 horsepower. Its enclosure is open, meaning it is not protected against environmental factors like dust, liquids, or corrosive gases. Therefore, it should be kept in a controlled environment with regulated temperatures.

1336F-BRF20-AN-EN-L6E

The 1336F-BRF20-AN-EN-L6E is an Allen Bradley AC drive designed for three-phase AC motors. It is a 2 horsepower drive capable of operating on both AC and DC voltage. It has a built-in controller that can be programmed in English, and it also has an option for a control interface with a 115V AC rating. The drive has an IP00 (open) enclosure. And it has a digital potentiometer that allows for precise control of the drive.

1336F-BRF30-AA-EN

The 1336F-BRF30-AA-EN is an Variable Frequency Drive from Allen Bradley/ Rockwell Automation, part of the 1336 Plus II series. It can operate on AC and DC power supplies and is designed to control and optimize induction motors. Additionally, it has built-in analog and digital I/O options and supports communication protocols such as DeviceNet, ControlNet, and EtherNet/IP. It also has a built-in dynamic braking transistor for safe deceleration of the motor.

1336F-BRF30-AA-EN-GMS1

The 1336F-BRF30-AA-EN-GMS1 is a variable frequency drive (VFD) from Allen Bradley's 1336 bulletin. It provides optimal control to induction motors and serves as a voltage and frequency regulator. The drive is digitally programmed and supports both AC and DC input supplies (3-phase). It supports 3 horsepower output power at 380/480V AC or 512/620 VDC input. It also has an IP20/ NEMA 1 enclosure. Its enclosure is suitable for indoor use.

1336F-BRF30-AA-EN-GMS5-L4

The 1336F-BRF30-AA-EN-GMS5-L4 is a variable speed drive, also known as a variable frequency drive (VFD) for motors. It offers excellent motor torque and supports various control algorithms. The drive has a durable enclosure and allows users to mount it flexibly. It can handle 380-480VAC or 513-620V DC input rating and generates 2.2 kilowatts (3 horsepower) output rating. It can use a GM5 snap-in cradle for communication and has a TTL contact interface.

1336F-BRF30-AA-EN-HAS1

Allen Bradley's 1336F-BRF30-AA-EN-HAS1 is a product type of AC drive for industrial motors. This drive comes from the famous 1336 PLUS II series. It can handle AC and DC supply voltage ratings and generate excellent torque. The drive can provide excellent velocity and voltage control to 3-phase powered induction motors. It has NEMA Type 1 (rated) enclosure, an inbuilt HMI module, an onboard communication option, and vector control features.

1336F-BRF30-AA-EN-HAS1-L6

The 1336F-BRF30-AA-EN-HAS1-L6 is a 3-phase powered AC drive for induction motors, which is suitable for low and medium-inertia motors in various industrial applications. It can handle input voltage ratings of 380 to 480V AC and 513 to 620V DC while producing a normal duty output rating of 2.2kW/ 3 HP. The device features a NEMA 1 enclosure, a programmer with a digital potentiometer, and a control interface rated at 115V AC.

1336F-BRF30-AA-EN-HAS2

The 1336F-BRF30-AA-EN-HAS2 is a type of variable frequency drive for 3-phase induction motors from the 1336 Plus II family of Allen Bradley. It can regulate motor speed and voltage. It has a programmer/ controller with a digital pot that ensures its applicability to other devices and flexible use. It has an output rating of 2.2kW/3HP and an operational voltage range of 380 to 480V AC or 513 to 620V DC.

1336F-BRF30-AA-EN-HAS2-L4

The 1336F-BRF30-AA-EN-HAS2-L4 is an Allen Bradley drive designed for induction motors and is included in the 1336 Plus II product series. The 1336F-BRF30-AA-EN-HAS2-L4 drive is designed to function with a 3-phase AC power source and accepts an input voltage ranging from 380 to 480VAC or 513 to 620V DC. It is capable of delivering a steady output power of 2.2 kilowatts (3 horsepower). It also has an IP20 (rated)/ NEMA 1 enclosure.

1336F-BRF30-AA-EN-HAS2-L5

The Allen-Bradley 1336F-BRF30-AA-EN-HAS2-L5 is a variable frequency drive. It can operate on an AC voltage range of 380 to 480, allowing for precise control and optimization of motor performance in various industrial applications. The drive is encased in an IP20/NEMA 1 enclosure. It also features an onboard communication option and an inbuilt human-machine interface (HMI) that includes a variety of useful functions. Additionally, it is equipped with a pre-assembled IGBT brake.

1336F-BRF30-AA-EN-HAS2-L5E

The 1336F-BRF30-AA-EN-HAS2-L5E drive requires a 3-phase input voltage of 380 to 480 Volts, Alternate Current, at 47 - 63 Hertz. Typing commands on the controller/programmer can configure the integrated HMI in English. A digital potentiometer is also a part of the HMI. The inbuilt I/O is compatible with 24 Volts Alternate Current and Direct Current voltage. Additionally supported by the 1336F-BRF30-AA-EN-HAS2-L5E drive is an encoder for feedback. The 1336F-BRF30-AA-EN-HAS2-L5E drive for the A2-frame weighs 12.1 pounds.

1336F-BRF30-AA-EN-HAS2-L6

The 1336F-BRF30-AA-EN-HAS2-L6 is a 3-phase AC drive for low-inductance motors. It is designed by Allen Bradley and is featured in the 1336 PLUS II product series. This drive requires a voltage range from 380 to 480V AC while supporting a 3 HP (2.2 kW) continuous output power rating. In addition, it has an option for a 115V AC (rated) control interface card and a programmer with a digital potentiometer.

1336F-BRF30-AA-EN-HAS2-LA4-L4

The conformally-coated design of the Allen-Bradley drive, Catalog ID 1336F-BRF30-AA-EN-HAS2-LA4-L4, offers a typical IP20 enclosure option. A human-machine interface screen with programming keys & an LCD with two lines of text is located in the enclosure's center. The 1336F-BRF30-AA-EN-HAS2-LA4-L4 offers a good deal of torque in a compact housing with only 8.5 inches by 11.4 inches by 8.15 inches in size. No matter how quickly it varies, the driver keeps exact track of the speed reference point.

1336F-BRF30-AA-EN-HAS2-LA5-L4

The output side of the 1336F-BRF30-AA-EN-HAS2-LA5-L4 produces 2.2 kilowatts (3 horsepower) & 3.8 Amperes. This drive incorporates a detachable programmer/controller HMI module and a digital potentiometer for quick and accurate parameter and set-point input. A unique interface board is part of the 1336F-BRF30-AA-EN-HAS2-LA5-L4 drive and contains a single-ended non-isolated pulse output, a configurable non-isolated output, and one isolated pulse input. Several installed features highly protect the drive's internal circuits, but it is advised to provide an additional layer of security by mounting a fuse on the input side.

1336F-BRF30-AE-DE

The advanced load adjustment feature enables a dynamic reaction to load variations, enabling the drive, Catalog ID 1336F-BRF30-AE-DE, to be used when the load is not constant. With its digitally configurable controls, this drive ensures accuracy and consistency. For brief power outages, the 1336F-BRF30-AE-DE drive allows power-loss ride-through. The drive has a programmable reset/run capability that enables it to automatically restart operations after a power outage based on its most recent speed and direction commands before the power loss, enhancing its energy-saving function.

1336F-BRF30-AE-EN

The variable frequency Alternate Current drive, Catalog ID 1336F-BRF30-AE-EN, needs to be connected to a single-point grounding circuit or a general grounding circuit during installation, and connections need to be insulated to reduce and eliminate electrical interference and noise. Altitude and ambient temperature are two significant variables that directly impact the unit's rating. It's vital to understand that the embedded enclosure is only meant for ordinary use; it won't shield the device from dangerous situations like explosions and coming into touch with chemicals.

1336F-BRF30-AE-EN-HAS2-L4

The Allen Bradley drive, Catalog ID 1336F-BRF30-AE-EN-HAS2-L4, will trip out to safeguard itself and the motor if the load demands become excessive and the motor begins to pull more than 150% of this rated power for longer than one minute. Additionally, the device provides safety from extreme voltages and shortcuts. A pre-installed human-machine interface module, a programmer & controller type of module with a digital potentiometer, is included with the Allen Bradley 1336F-BRF30-AE-EN-HAS2-L4 drive.

1336F-BRF30-AE-EN-HCS1

The 1336F-BRF30-AE-EN-HCS1 has a 5.3 Ampere output current rating and a 3 Horsepower output power rating. A 32-character LCD screen, an analog potentiometer, input & control keys, and an HMI are all used to program the 1336F-BRF30-AE-EN-HCS1 drive. The variables and process requirements, alert notifications, and information about the drive's present state are all displayed on this HMI. The drive will alert users and display the required corrective measures when a significant alarm occurs.

1336F-BRF30-AE-IT

The drives in this series, Catalog ID 1336F-BRF30-AE-IT, include certifications such as the CSA & UL standards, and all of the enclosures are constructed following NEMA and European requirements. The 1336F-BRF30-AE-IT Alternate Current drive, which has three operating phases, has a wide range of applications and a variety of incorporated characteristics. The drive's nominal power rating is three horsepower, and it can be used with input voltages ranging from 380 - 480 volts of Alternate Current or 513 to 620 volts of Direct Current (2.2 kilowatts).

1336F-BRF30-AN-EN

A variety of protective features, including detection and trip, overcurrent & overvoltage stall, six drive alarms, etc., are included in each drive, Catalog ID 1336F-BRF30-AN-EN. It safeguards against various threats, including under-voltage, over-voltage, encoder failure, ground fault, etc. This Allen Bradley drive comprises proactive current limit controls, several sensors, insulated gate bipolar transistors, and other dynamic current control equipment. The 1336F-BRF30-AN-EN motor is designed to handle many unique functions, including step logic, an auto-economizer, and auto-tuning capabilities.

1336F-BRF30-AN-EN-GMS1

The 1336F-BRF30-AN-EN-GMS1 offers optional encoder feedback for applications requiring flawless speed regulation. Following that, closed-loop speed regulation is provided from an empty to a fully loaded operation. It comprises selectable voltages that, when chosen, provide full operation. Start and run boosts are included in these voltages. Additionally, it has an enhanced acceleration control that provides a strong acceleration torque. This helps move the most difficult loads. The 1336F-BRF30-AN-EN-GMS1 can execute logic steps with or without the aid of a programmable controller when it is programmed.

1336F-BRF30-AN-EN-GMS1-L5

The Allen Bradley 1336F-BRF30-AN-EN-GMS1-L5 variable frequency drive must be mounted vertically while maintaining the necessary clearances on both sides, the top and the bottom of the drive. These clearances are roughly 101.6 millimeters horizontally and 152.4 millimeters above and below the ground (on each drive side). The English-programmed Allen Bradley 1336F-BRF30-AN-EN-GMS1-L5 adjustable frequency motor interface has a single-point remote I/O option for communication and a 24 Volt Alternate Current/Direct Current control interface.

1336F-BRF30-AN-EN-HAS1-L4

The 1336F-BRF30-AN-EN-HAS1-L4 drive can sustain an external temperature of up to 5 degrees Celsius greater in an open container than it could in a closed enclosure. However, the enclosure does not completely shield the drive from dusty surroundings because it does not guard against the entry of corrosive particles. However, it offers mounting support and protection for the drive's connections and wirings. The Allen Bradley 1336F-BRF30-AN-EN-HAS1-L4 speed control drive must be grounded to reduce electromagnetic interference.

1336F-BRF30-AN-EN-HAS2

The installation and wiring of the Allen Bradley drive, Catalog ID 1336F-BRF30-AN-EN-HAS2, can be completed fast, but for the installation to operate and last over the long term, it is crucial to utilize the proper motor cable. It is recommended to connect the motor's electricity using insulated cables. Additionally, it is advised to set up this module in a dry area with a humidity range of 5 to 95%. (without condensation). An interface for the Allen-Bradley 1336F-BRF30-AN-EN-HAS2 comprises a controller and programmer parts (with a digital potentiometer).

1336F-BRF30-AN-EN-HAS2-L4

The 1336 PLUS II motor, Catalog ID 1336F-BRF30-AN-EN-HAS2-L4, improves torque and speed regulation by automatically adjusting load speeds. The drive features an auxiliary closed-loop velocity control system, and the motor operates thanks to its IGBT quietly. The 1336F-BRF30-AN-EN-HAS2-L4 1336 PLUS II motor is perfect for applications that require unattended operation because it features the "run on power up" capability & the auto-reset/run feature. Additionally, this drive has sensorless vector control, perfect for uses that call for accurate torque adjustment.

1336F-BRF30-AN-EN-HASP-L4

A TTL contact control interface of the 1336F-BRF30-AN-EN-HASP-L4 1336 PLUS II HDD is available. It contains a built-in operator interface with an LCD & functional keys for fast local programming that is only accessible by programmers. This module has embedded interjection braking, static braking, & a holding brake in addition to compatibility and external braking systems. The 1336F-BRF30-AN-EN-HASP-L4 PLUS?1336 II drive is designed with sensorless vector control to enable precise speed & torque regulation even in industrial applications that require very low rates of roughly 15 revolutions each minute.

1336F-BRF30-AN-EN-HASP-L6

In addition to its various motor control modes, the 1336F-BRF30-AN-EN-HASP-L6 includes several choices for automatically restarting operation when power is restored after line power is lost. Its flying start function begins at the rotational loads' present speed and direction. The 1336 PLUS II drive from Allen Bradley, model number 1336F-BRF30-AN-EN-HASP-L6, provides Class 10 electric drive overcurrent protection for motors. The drive's power overload protection does not overlap with this functionality.

1336F-BRF30-AN-EN-HCS2

The Alternate Current-voltage range for the Allen Bradley 1336F-BRF30-AN-EN-HCS2 variable frequency Alternate Current drive is 380 to 480 volts, and the Direct Current voltage range is 513 to 620 volts. Both of these voltages have an output horsepower rating of 3 Horse Power. When choosing a drive and a motor, caution must be used. To determine if both of these modules are compatible or not, their specifications must be compared.

1336F-BRF30-AN-EN-HCS2-L4

The 1336F-BRF30-AN-EN-HCS2-L4 drive offers customers exceptional performance levels without the risk of hazards because it is loaded with safety safeguards. Although it can be used in various industrial contexts, the HVAC and tools sectors are most frequently used. The 1336F-BRF30-AN-EN-HCS2-L4 is housed in an open enclosure that is IP00-rated and has a TTL contact management interface option. The Allen Bradley 1336F-BRF30-AN-EN-installed HCS2-L4's Human-Machine Interface has controller and programmer components. A digital potentiometer in this device allows for on-site speed control.

1336F-BRF30-AN-EN-HCS2-L5

A 24 Volt, Alternate Current/Direct Current control interface option, is available on the upper left side of the 1336F-BRF30-AN-EN-HCS2-L5 drive (TB3 terminal). An HMI module with an LCD, programming keys, one digital potentiometer, control keys, and one upload/download function is located next to it on the drive. An English manual is provided with the Allen Bradley 1336F-BRF30-AN-EN-HCS2-L5 and can be used as a quick reference guide when installing and servicing the drive.

1336F-BRF30-AN-EN-HCS2-L6

The Allen Bradley module, Catalog ID 1336F-BRF30-AN-EN-HCS2-L6, has alarms and light-emitting diodes to inform people if either of these abnormal ambient temperatures arises. The module can malfunction the 1336F-BRF30-AN-EN-HCS2-L6 drive under extreme circumstances to protect it from damage. The IP00-rated housing of the Allen-Bradley 1336F-BRF30-AN-EN-HCS2-L6 speed controller offers protection. The 1336F-BRF30-AN-EN-HCS2-L6 drive also has a control interface card rated for 115 Volts Alternate Current, which has input terminals connected to the components directly affecting the drive.

1336F-BRF30-AN-EN-HCS2-LA1-L6

The flying start option of the 1336F-BRF30-AN-EN-HCS2-LA1-L6 PLUS II motor is for applications where the drive needs to pick up the functioning of the already spinning power loads based on the load speeds. It has a non-isolated and single-ended customizable input, two single-ended, non-isolated outputs, one configurable, and a 20-milliamp rating on the other. It also has a 115 Volt Alternate Current control interface. The 1336F-BRF30-AN-EN-HCS2-LA1-L6 PLUS II motor can be set up to operate without stopping during brief power outages.

1336F-BRF30-AN-EN-HCSP-L6

Regardless of the changes in motor size, the Product ID 1336F-BRF30-AN-EN-HCSP-L6 1336 PLUS II drive's programmable Hertz/Volts operation enables smooth operation in industrial applications that call for connecting numerous motors to a single drive. Additionally, this drive uses sensorless vector control to increase acceleration for even the most demanding loads while offering outstanding torque & speed regulation in low-speed applications. The 1336F-BRF30-AN-EN-HCSP-L6 drive, like other Allen Bradley 1336 PLUS II drives, offers slip compensation, which enhances speed regulation by dynamically altering the load speeds.

1336F-BRF30-AN-EN-L4

The 1336F-BRF30-AN-EN-L4 delivers line-transient protection up to 6000 Volts and has a short-circuit rating of 200,000 Amperes (Symmetrical), BUS Alternate Current under voltage or over voltage tripping of 280 Volts Alternate Current and 570 Volts Alternate Current, respectively. It features a power & logic controller ride-through time of 15 ms & 0.5s, respectively, and an over-current (hardware) limit of 80 - 250%. The real power input span for the 1336F-BRF30-AN-EN-L4 is 4.2-5.1KVA, the input current is 6.5A, and the output ratings are 4.2K VA & 5.3 A, respectively.

1336F-BRF30-AN-EN-L5

The 1336F-BRF30-AN-EN-L5 is a 3-phase AC-powered variable speed drive for low inductance motors by Allen Bradley/ Rockwell Automation. This unit is featured in the 1336 Plus II series. It is built into an A2 frame and enclosed in IP20/ NEMA 1 enclosure. The AC voltage class of the driver ranges from 380V to 480V, while the DC ranges from 513V to 620V. It supports 2.2 kW (3 HP) nominal output power.

1336F-BRF30-AN-EN-L6

The 1336F-BRF30-AN-EN-L6 by Allen Bradley is a Variable Frequency Drive (VFD) for low-inductance motors. It can optimize motors, enhance process control and regulate speed and voltage. The unit is available in both AC/DC classes and is pre-programmed in English. The enclosure type of drive is IP20/ NEMA 1 (indoor use only). It supports a 2.2 kW (3 HP) nominal output power rating. And it operates within 380 to 480V AC.

1336F-BRF50-AA-EN

This Allen Bradley drive, Model ID 1336F-BRF50-AA-EN, is manufactured by Rockwell Automation. This drive can operate on AC and DC input supplies with acceptable ranges of 380-180 Volts AC and 513-620 Volts DC. The output rating, however, is 5 HP. The diagnostics offered by these drives—including Fault reports and Custom Status reports—enable users to make educated decisions, particularly when working on the factory floor. Users can alter the Allen-Bradley 1336F-BRF50-AA-EN Drive since it is digitally programmable.

1336F-BRF50-AA-EN-GMS1

Part Number 1336F-BRF50-AA-EN-GMS1 is an AC Motor Drive designed and manufactured by Allen Bradley/ Rockwell Automation. It operates within 380 to 480V AC and supports a 3.7 kilowatts normal-duty output rating. Its primary application is to operate motors and control their speed in demanding applications. The drive can optimize power and improves energy efficiency. It is equipped with a human-machine interface (HMI) and communication slot. And it has IP20/ NEMA 1-rated enclosure.

1336F-BRF50-AA-EN-GMS1-L4

The 1336F-BRF50-AA-EN-GMS1-L4 is a variable frequency drive from Allen Bradley. It is part of the 1336 Plus II series and is a 3-phase powered unit with 380 to 480 Volts AC or 513 to 620 Volts DC class and supports a 3.7 kW / 5HP output power rating. In addition, it features GM1 with a snap-in cradle for communication and TTL contacts. It comes with IP20/ NEMA 1 enclosure (indoor use).

1336F-BRF50-AA-EN-GMS1-L6E

The 1336F-BRF50-AA-EN-GMS1-L6E drive's output-rated power is 5 Horse Power (3.7 kilowatts). The input currents are 10 Amperes & 10.7 Amperes, respectively, for constant and variable torque. Constant & variable torque have output currents of 8.4 Amperes & 9 Amperes, respectively. Constant and variable torque have correspondingly rated input powers of 6.6 to 8 kilo-Volts-Amperes & 6.6 to 8.5 kilo-Volts-Amperes. The 1336F-BRF50-AA-EN-GMS1-L6E drive has an integrated single-point remote Input/Output communication interface and an embedded HMI compatible with English as the configuration language.

1336F-BRF50-AA-EN-GMS5

The Allen Bradley 1336F-BRF50-AA-EN-GMS5 motor has a carrier frequency range of 2 to 10 kilo-Hertz. It offers frequency control in a range of 0 to 400 Hertz utilizing either sensorless vector control or the absolute Volts/Hertz control. The intermittent overload capacity of this Alternate Current drive is 150% current overload for up to one minute. Users can connect automation equipment to input terminals to access common fixed drive functions, including start, stop, line loss, auxiliary fault, output contactor close, reset, velocity select, synchronize, and enable.

1336F-BRF50-AA-EN-GMS5-L4

The 1336F-BRF50-AA-EN-GMS5-L4 is a highly useful addition to this model because it has a built-in DeviceNet in a snap-on cradle for communications needs. The Allen Bradley 1336F-BRF50-AA-EN-interface GMS5-L4's and communications are both set to English by default. The 1336F-BRF50-AA-EN-GMS5-L4 can operate in the Alternate Current and Direct Current voltage ranges of 380 to 480 Volts and 513 to 620 Volts, respectively. The 1336F-BRF50-AA-EN-allowable GMS5-L4's output and input range is +/- 10%.

1336F-BRF50-AA-EN-GMS6-L6

This compact drive, Model ID 1336F-BRF50-AA-EN-GMS6-L6, is manufactured by Allen Bradley/Rockwell Automation and is part of the Bulletin-1336F series . This drive has basic solid and liquid protection with IP20(NEMA1)/EMC rating. The control interface requires a 115 Volts supply of AC while the communication is done through the GM6 with a snap-in cradle module. Additionally, its programmable Volts per Hertz control mode is appropriate for applications that call for several motors, regardless of whether the motors are the same size or various sizes. It can deliver maximum performance in every type of application.

1336F-BRF50-AA-EN-HAS1

When the motor stops and starts, the 1336F-BRF50-AA-EN-HAS1 is controlled by input signals. One should exercise caution when applying/installing a bypass system because improper installation can result in a shortened product life or damaged components. Connecting the Alternate Current line to the 1336F-BRF50-AA-EN-HAS1 controlling terminals or output, output circuits not connected directly to the motor, and inappropriate output or bypass circuits not certified by Allen Bradley are a few of the frequent causes of damage.

1336F-BRF50-AA-EN-HAS1-LA2-L4

An analog potentiometer is included with the Allen Bradley 1336F-BRF50-AA-EN-HAS1-LA2-L4 motor for on-site speed adjustment. Users can enter parameters using a tiny keyboard and see status messages on a two-line LCD screen. This Bulletin 1336 drive already offers several cutting-edge features, but communication accessories can make commissioning and customizing installations even easier. To get the best results for their industrial applications, users of the Allen Bradley 1336F-BRF50-AA-EN-HAS1-LA2-L4 can choose between the Sensorless or the Volts per Hertz Vector control.
Previous 1

...

22

23

24

...

27 Next

Displaying 50 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP