GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

PowerFlex 70

From Allen-Bradley/Rockwell Automation, the PowerFlex 70 product series includes various adjustable frequency AC drives. These devices operate via a three-phase input voltage that generally ranges from 240 volts AC to 600 volts AC. Depending on the input voltage rating of a drive, its current output ranges from 0.9 amperes to 78.2 amperes. Additionally, the power output of these drives ranges from 0.37 kilowatts (0.5 horsepower) to 37 kilowatts (50 horsepower). PowerFlex 70 adjustable frequency AC drives are available with an optional internal brake resistor. They are also available with either a ControlNet, DeviceNet or EtherNet/IP communication slot or even no communication slot at all. These Allen-Bradley products may include a human-interface module (HIM) that consists of an LCD display. Feedback for these drives is provided via an optional encoder with enhanced control. PowerFlex 70 AC drives can be panel-mounted, wall-mounted, machine-mounted, or flange-mounted depending on their enclosure.

PowerFlex 70 Selection Guide

Product Overview

PowerFlex 70 drives are manufactured in such a way that they meet global standards as well as ratings. They offer a wide range of ratings such as 0.5 to 20 HP output at 600V AC input, 0.5 to 50 HP output at 480V AC input, and 0.5 to 10 HP output at 240V AC input.

The PowerFlex 70 drive can be utilized in combination with a full-featured LCD Human Interface Module, which offers multilingual text for starting, metering, programming, and troubleshooting.

The PowerFlex 70 Ac drives are highly adaptable which helps meet complex application requirements. There is a long range of motor power and control options in PowerFlex 70 drives.

Similarly, the PowerFlex 70 AC drives are very flexible drives due to which the cost of ownership gets decreased. Application controls such as Pump-Off tend to increase its production. Moreover, it provides an impetus to security elements and robust techniques to give the best user experience.

Another important factor that is critical for the efficiency of the device is connectivity. It is responsible to ensure the stability of the whole system within a device as well as being the basic key to supervising and monitoring the relevant application. Moreover, real-time data integration in the application speeds up the working of the drive. Not only this, but all the features of the drive also make that data very simple and easy to use by the customers. Such kind of ease is the leading factor behind the agility and efficiency of the drive.

In addition, the drive helps the customer to acquire an easier and upgraded setup. It offers a proper domain of visibility for the machine-data level and the whole system. The troubleshooting in the drive is very fast and information related to diagnostics becomes available to the users. Moreover, it possesses the ability to give remote monitoring for visibility and communications between the control room and the plant floor.

The most eminent benefit of all is that the PowerFlex 70 AC drive has multiple safety features for the protection of workers. There is better integration in the drive, in terms of programming and configuration within the Logix environment. Similarly, commissioning and development time is significantly less for the drives, which offer quicker time to the market. With proper diagnostics as well as alerts for abnormal parameters of operation, the drive manifests great defense against unexpected downtime.

Any user can program the PowerFlex 70 for either Sensorless Vector Control or Volts per Hertz to cater to a long range of applications from fans to extruders at large.

There are optional internal communication modules that result in efficient and speedy control and data exchange with host controllers over well-known interfaces. EtherNet, DeviceNet, ControlNet, Serial Communications, Remote I/O, and other communication, and control networks are its eminent interfaces. Programming, monitoring, and troubleshooting of PowerFlex 70 are assisted by PC tools.

Salient Features

Human Interface Tools That Are Simple to Use

The human interface tools in the PowerFlex 70 AC drives are properly optimized and standardized. This is the reason why they are user-friendly and simple to use. These tools are classified into two broad categories such as computer-based setup tools and LCD human interface modules.

The LCD human interface module offers multiple languages such as French, English, Dutch, Italian, German, Portuguese, and Spanish. Its display is very large as it gives 7-line by 21-character display. To provide faster access to routine normal operation, there are extra function buttons. Fast data entry Is ensured by a number pad that is similar to a calculator. There are various control keys for the direction, speed, stop, and start. Moreover, there are various versions with remote controls which are specifically purposed for panel mounting applications.

Hardware Features that Save Space

For addressing EMC (Integral electromagnetic compatibility) criteria, notably CE in Europe, integral EMC filtering offers convenient, fully featured packaged solutions. Integral dynamic brake transistors offer a cheap way to switch regenerative energy without spending money on expensive exterior chopper circuits.

Internal Communications allow the user to incorporate the drive into the production process. An internal dynamic brake resistor makes the drive not need any additional panel area and provides a significant quantity of the braking torque for brief durations. All internal communication choices include status indicators that are displayed on the lid for simple setup and drive communication monitoring. As they configure, control, and gather data, one can quickly manage information to the top level from the shop floor and smoothly connect their entire system.

Exceptional Performance and Command

The PowerFlex 70 AC is one of the most efficient drives among the PowerFlex family. There are various benefits in terms of built-in diagnostics, and myriads of programming options as well as strong drive control when there is a combination of the PowerFlex 70 drive with phase II control. One of the eminent advantages of the drive is that it offers a customizable portfolio. It not only helps users to remain connected with their activities and operations but also increases their productivity. The upgraded and updated controller of the drive makes it effective and affordable thereby making it an embodiment of an efficient control solution. As a result, all the factors above contribute to the drive’s outstanding performance. Moreover, without or with feedback from the encoder, Vector Control with FORCE Technology (1) offers excellent speed and torque management. Sensor-free High torque is produced through vector control across broad speed ranges, and it can adjust to the unique features of each motor.

Flexible Packaging and Mounting

The drive is covered in an insulator, or non-conducting material, that helps shield it from environmentally stressful elements brought on by highly polluted atmospheres, such as moisture, fungi, dust, corrosion, abrasion, and others. When a product is exposed to a corrosive environment, the coating lengthens the expected lifetime of the product. It ensures the assembly's operational integrity while assisting in maintaining long-term surface insulation resistance

Side-by-side and direct mounting is possible for these drives. The installation cost of the drive is kept as minimum as possible. Moreover, Pull-apart control terminal bars provide quick disconnecting and straightforward wiring.

Drive Features

There is a vigilant and active current limit and bus voltage limitations in the drive. As result, maximum deceleration and acceleration are achieved in the drive without any tripping. There is a high-speed analog input mechanism in the drive. In this way, the responsiveness of the drive to speed or torque gets improved significantly. Due to programming freedom in the drive, it can link settings at large. The option of flying start gives a continuous connection to the rotating and varying loads. Due to user sets, up to three full sets of data related to parameters can be allowed. Slip compensation provides 0.5% open-loop speed management across a large speed range, removing the requirement for speed response devices in certain applications. The first product in the DriveGuard line of safety solutions, Safe Torque Off, works to stop drives from providing rotational energy to motors by combining a safeguard circuit with the drive's switching power signals.

Incredible Network Communications Capabilities

Countless benefits are offered by PowerFlex 70 drives, which are interoperable with a variety of communication adapters. With adapter routing, one can connect a PC to one drive and communicate with all other Allen-Bradley drives on the same network without going via a network scanner. Users have total control over every configuration of the network. When AutoBaud is available, connections are established more quickly. (Unconnected Messaging) enables direct disc interaction without passing via the network scanner for other network devices (like PanelView). When changing a drive, ADR ("Automatic Device Replacement"), which configures a scanner to automatically identify any new drive and download the necessary parameter settings, saves time and effort. Adapters may be configured to communicate user-customizable logic control and speed reference values, as well as to carry out fault-based actions including ramp-to-stop, hold the last state, and coast-to-stop. Additionally, dependent on whether the network had a significant issue (such as a broken cable) or was idle, other measures may be taken (PLC set to "Program"). Depending on the state of a master drive or (consumer), peer control enables one or more slave drives or (consumers) to operate (producer). Additionally, it may considerably lessen network traffic.

Environmental Consideration

The PowerFlex 70 drive can operate at an altitude of up to 1000 m without any derating. Without derating, the maximum temperature of the surrounding atmosphere ranges from 0 to 50 degrees Celsius. However, the temperature ranges from 0 to 40 and 0 to 65 degrees Celsius for the chassis (heatsink) and control, respectively. The temperature range for storage is -40 to 70 degrees Celsius. No volatile or corrosive gases, fumes, or dust should be present around the PowerFlex 70 AC drive. The drive must be stored in a corrosive-free environment if it isn’t fitted for a long time. The drive's permissible relative humidity ranges from 5 to 95 percent.

Programming Parameters

Three different kinds of parameters are used by the drive:

  • ENUM: Selections for ENUM parameters can be made from two or more elements. Each item has a text message shown on the LCD HIM. For each item, the LED HIM displays a number.
  • Bit: Individual bits inside bit parameters are connected to attributes or circumstances. The feature is disabled, or the condition is false if the bit is set to 0. The feature is activated, or the condition is true if the bit is set to 1.
  • Numeric: These variables only have one numerical value (for example 0.1 volts).

Depending on your unique requirements, you may build drive packages using the PowerFlex 70 packaged drives program. With extra control, power, and packaging choices that are perfect for original equipment manufacturers (OEMs) and customers with unique installation requirements, this program improves the functionality of stand-alone drives. You can build packages using the catalog configurable drives program depending on your requirements. By putting together a single catalog number string that contains a basic drive and all necessary extras, a full drive package may be supplied.

For 480V needs, the packaging is offered in NEMA (IP20), NEMA (IP65) 4/12, and NEMA 3/4 outdoor ratings. The standard designs, which are concentrated on larger volume, recurring business, offer consistent production and reduce client resources by cutting down on Manufacturing, engineering, as well as installation duration.

The PowerFlex 70 AC: Packaged Drives

Users of the PowerFlex 70 AC Packaged Drives Program can design drive packages that meet their unique requirements. Through extra control, energy, and packaging choices, this program improves the functionality of stand-alone drives and is perfect for OEMs and end consumers with specialized installation requirements. Three levels make up the program: Engineered drives, Standard Packaged Drives, and Quick Ship. Products that ship quickly are meant to satisfy customers who need deliveries more quickly than usual. The current product line is based on top-of-frame ratings for NEMA 1 (IP20) and NEMA 4/12 (IP65), both at 480V. (frame A-D).

Users of the Standard Packaged Drives Program can design drive packages that meet their unique requirements. By putting together a single catalog number sequence that contains a basic drive and all necessary extras, a full drive package may be supplied. For 600V,480V, 240V, and 208V applications, the packaging is offered in NEMA Type 1 (IP20), NEMA 4/12 (IP65), and NEMA 3/4 (IP65) outdoor configurations. A completely specified catalog string that is specified in the pricing sheet makes up the program. The standard layouts, which are concentrated on larger volumes and recurring business, offer consistent production and reduce client resources by cutting down on engineering, manufacturing, and installation time.

Users have the option to construct drive packages outside the scope of the Standard Packaged Drives offering using the Engineered Drives Program. Both the Enhanced Control and Standard versions of the PowerFlex 70 are supported by this application.

Installation Considerations

Installations of the PowerFlex 70 frequently include adding input fuses or a circuit breaker. Electrical codes and/or national and local industrial safety regulations may place further limits on these systems.

There are a variety of cable types allowed for drive installations. If it is kept away from crucial circuits, the unshielded cable is adequate for many systems. For every 10 meters of length, allow 0.3 meters of space. Wherever possible, long parallel runs should be avoided.

Power Wiring

The PowerFlex 70 includes multiple safety measures to facilitate installation. Ground fault protection enables dependable operation both during startup and operation. Overload-protected electronic motors have a longer motor lifespan.  Alternatively, if the drive is linked to a resistive grounded system, an ungrounded system, a B-phase grounded system, or an impedance grounded system, these devices must be unplugged. If the driving power source is a regenerative unit or DC supplied by an active converter, these devices should also be unplugged. Thanks to 6 kV transient protection, the 380–480V system voltages are more durable.

Browse our selection of PowerFlex 70 units

AutomationStop.com's online catalog offers one of the largest selections of preowned PowerFlex 70 units in the world.

20AD011A0NYNAENN

The Allen-Bradley 20AD011A0NYNAENN drive is a PowerFlex 70 series drive that has a 5.5 kW/7.5 Hp normal duty output power rating. It is designed to operate at 480V AC and designed to operate on 3-phase AC voltage. The 20AD011A0NYNAENN drive features an Ethernet slot, a conformally-coated IP20 enclosure, an IGBT, and a blank cover instead of an interface. It also operates with 11 Amps of output current.

20AD011A0NYNANC0

The PowerFlex 70 20AD011A0NYNANC0 drive is an Allen-Bradley drive that has advanced control. It does not have an encoder or interface. The 3-phase input voltage rating of the 20AD011A0NYNANC0 drive is 480V AC, and its output ratings are 11 Amps, 5.5 kilowatts, and 7.5 Horsepower at this voltage rating. The 20AD011A0NYNANC0 drive is meant to operate indoors, and it comes with an IP20 enclosure to protect it from dust and debris. It also comes with a conformal coat to protect it from fluids and corrosive chemicals.

20AD011A0NYNANNN

This PowerFlex 70, Catalog ID 20AD011A0NYNANNN, features a C frame size, an IP 20-panel mount enclosure type, a blank cover instead of a keypad unit, and a C frame size. The maximum current draw of this PowerFlex 70 Alternate Current drive is 11 Amperes. In addition, at 7.5 horsepower, this PowerFlex 70 Alternate Current drive can deliver high thrust. That's why 480 Volts Alternate Current is required for this variable frequency drive. This particular PowerFlex 70 comes in a panel mount, IP20 enclosure and features a C-frame size, blank cover, and no keypad unit.

20AD011A1AYNACNN

The Allen Bradley 20AD011A1AYNACNN 3-phase drive can run on both current limit and bus voltage modes. It has a 480-volt operating voltage, a 7.5 horsepower normal load output power rating, and a ControlNet connection slot. The working temperature of this drive, which weighs 6.89 kilograms, must not be higher than 50 degrees Celsius. It is shipped with a NEMA Type 1 enclosure that may be opened by removing the top adhesive label. Clearances must be left above and below the drive to encourage heat escape and ventilation. It prevents overheating.

20AD011A1AYNANNN

The 20AD011A1AYNANNN drive is an Allen-Bradley drive from the PowerFlex 70 product line that has the capacity to control many types of motors. Its Volts/Hertz technology allows it to control motors in simple devices such as pump and fan systems, and its vector technology options allow it to control motors in extruders and other more complex systems. The 20AD011A1AYNANNN drive has a Size C frame, an IP20 enclosure, a panel mounting option, an IGBT, a filter, and a 3-phase input voltage rating of 480V AC.

20AD011A1AYYANNN

This drive, Product ID 20AD011A1AYYANNN, has 7.5 horsepower and an 11 Amperes capacity. It's a three-phase, 480 Volts Alternate Current variable frequency drive. The brake transistor and resistor in the 20AD011A1AYYANNN PowerFlex drive don't need any extra mounting space, so you can maximize your efficiency without taking up any extra room. The 20AD011A1AYYANNN Allen-Bradley PowerFlex drive is compatible with the 1321-3R12-B input and output line reactors to match 3% impedance and protect against disturbances. The drive-to-motor ratio standard for this drive is 1:2 minimum and 2:1 maximum.

20AD011A2AYNADNN

The output rating for this Allen-Bradley drive, Catalog ID 20AD011A2AYNADNN, is 11 Amperes. It has a 5.5 kilowatt ND output rating. Integrated into the 20AD011A2AYNADNN PowerFlex drive is an IGBT that combines excellent efficiency with rapid switching capacity. It contains a class 10 rotor overload protection that ensures a longer rotor lifespan and other safeguarding features that assure trouble-free operation and 6 kilovolts of rated transient protection. The 20AD011A2AYNADNN 70 drive includes speed, torque, & safety characteristics that provide cutting-edge motor control for many uses.

20AD011A2AYNANNN

The kilo-Watts rating of this Allen Bradley PF70, Product ID 20AD011A2AYNANNN, is 5.5. Additionally, this Alternate Current drive has a 7.5 horsepower motor and an 11 amperage rating. Since the 20AD011A2AYNANNN drive is insulated, you should connect it with a shielded connection to prevent unwanted noise and interference. After installation, users should perform regular maintenance to extend the drive's useful life. Keep the drive frequency fans dust-free by regularly cleaning them. Maintain a consistent schedule of inspecting the drive for problems.

20AD011A3AYNACC0

The kW rating of this Allen-Bradley 7.5 Horsepower adjustable frequency drive, Product ID 20AD011A3AYNACC0, is 5.5 kilowatts. Its Alternate Current driving rating is 11 Amperes. The 20AD011A3AYNACC0 drive must be safeguarded against current spikes by employing insulated cables and the proper fuse type. The cable's insulation will keep outside noise at bay. Any clutter or missing covers from the setup process should be replaced before it is turned on for the first time.

20AD011A3AYNACC1

The Product ID 20AD011A3AYNACC1, produced by Allen-Bradley, has a 7.5 horsepower HP ND output rating. It also has an ampere rating of 11 and a 5.5-kilowatt rating. The drive comes with an IGBT braking controller and an instruction manual. The standard package does not include the internal brake resistor installed on the drive. Install the 20AD011A3AYNACC1 in a vertical orientation. During drive operation, the suggested temperature range is between 32 and 122 degrees Fahrenheit, and a vertical clearance of 3 inches is recommended to allow for airflow around the drive. Corrosive fumes should not be present in the driving environment.

20AD011A3AYNACG1

This PowerFlex 70 drive from Allen Bradley/Rockwell Automation, Catalog ID 20AD011A3AYNACG1, has a 5.5 kilo-Watts rating. Additionally, this 70 has a 7.5 horsepower rating. Motors and drives require a cable connection. Users can utilize a shielded cable since it protects the AC drive from outside interference and the noise generated by the drive itself. In addition, make sure you're using the correct cables by consulting the documentation provided by the maker.

20AD011A3AYNACNN

The 7.5 HP rating applies to this Allen Bradley PowerFlex 70 AC drive, Catalog ID 20AD011A3AYNACNN. The device has a 5.5-kilowatt rating. The PI control included in the module also makes external process loop controllers superfluous. During a lengthy blackout, the inertia ride-triple-through action allows you to use the spinning energy stored in high-inertia, low-friction loads. The slip compensation on the 20AD011A3AYNACNN is another helpful feature that contributes to its ability to provide open-loop speed regulation with an accuracy of at least 0.5% over a broad speed range.

20AD011A3AYNADC0

This drive, Catalog ID 20AD011A3AYNADC0, features a panel mount and operates on 480 Volts Alternate Current (50 Hertz) (IP20). An induction motor's speed and torque can be controlled via this drive. The Allen-Bradley 20AD011A3AYNADC0 is a panel-mounted frequency drive with a full numeric LCD keyboard and its own human-machine interface. Additionally, it contains indications for the drive's and its communications connections' statuses. The human-machine interface, status LED indicators, or a series of alarms can all be used to find faults. Once a fault has been identified, it can be corrected using the LCD, at which point all alarms and status indicators will stop sounding.

20AD011A3AYNADG0

The Allen-Bradley/Rockwell Automation Adjustable Frequency Motor, Catalog ID 20AD011A3AYNADG0, is a PowerFlex 70 AC drive. It has 480 Volts AC power, 11 Amperes of current, a complete numeric LCD, and a NEMA Type 1 housing. It can be used on a circuit that can produce a maximum voltage of 600 volts and up to 200,000 RMS symmetrical amps of current. It offers flexibility in application, great performance, and ease of usage. It is also ideally suited for applications requiring position, speed, and torque control and multiple motor controllers.

20AD011A3AYNADNN

Allen Bradley's 20AD011A3AYNADNN has an 11 amperage output rating. This Alternate Current drive has a rated horsepower of 7.5. Following installation, the wiring must be completed following the manufacturer's guidelines. Additionally, it is advised against utilizing filters in an ungrounded system. Furthermore, ensure the drive's temperature stays between 0 and 50 degrees Celsius and should not go higher. Users can contact the producers for technical support or consult the manual's instructions if they need any help with installation.

20AD011A3AYNAEC0

The ND output rating of this drive, Product ID 20AD011A3AYNAEC0, produced by Allen-Bradley/Rockwell Automation, is 5.5 kilowatts. The horsepower ND power rating for this variable frequency drive is 7.5 HP. With this clearance, the module can breathe and won't overheat while adhering to mounting clearance restrictions. The drive's fans should be regularly cleaned after installation to avoid dust buildup. The 20AD011A3AYNAEC0 drive also has to be calibrated and functionally tested regularly.

20AD011A3AYNAEG0

The PowerFlex 70 drive product line includes the Allen-Bradley 20AD011A3AYNAEG0 drive. It is an adjustable frequency Alternate Current drive. It has an output rated power of 5.5 kW or 7.5 horsepower, a three-phase line voltage of 480 Alternate Current Volts, and a current capacity of 11 Amperes. There is no internal brake resistor in this drive. For drives rated for 600 Volts, the control and I/O functionalities are not available as factory-installed extras. There is no feedback or improved control on this drive.

20AD011A3AYNAENN

A Powerflex adjustable frequency AC drive is the 20AD011A3AYNANCN. The drive is a member of the 70 drive family and is made by Rockwell Automation. The drive is vertically placed and should make complete contact with the mounting surface. There should be no need for spacers or standoffs. The users must, above all, make sure that the ambient air temperature complies with the product requirements. It should be noted that the drive contains ESD-sensitive parts and assemblies before installing it.

20AD011A3AYNANC0

The Allen-Bradley/Rockwell Automation 20AD011A3AYNANC0 drive from the PowerFlex 70 product line was manufactured with an enhanced control option that does not include feedback or an STO safe torque off feature. This drive also has filtering, an LCD HMI, and an enclosure that is IP20-rated and conformally-coated. The 20AD011A3AYNANC0 drive operates at 480V AC of input and at 11 Amps, 5.5 kW, and 7.5 Hp of output.

20AD011A3AYNANC1

The 7.5 horsepower PF70 from Allen-Bradley, Catalog ID 20AD011A3AYNANC1, is an 11 Alternate Current drive. It has a 5.5-kilowatt capacity as well. Drive problems are considered to be caused by critical conditions, and Allen-Bradley 20AD011A3AYNANC1 AC Drive operation should be stopped when they occur. An output contactor can also connect the Allen-Bradley 20AD011A3AYNANC1 AC Drive to the motor. Without causing any harm to the Allen-Bradley 20AD011A3AYNANC1 AC Drive, the contactor can be opened while under load.

20AD011A3AYNANG0

The ND output rating for this Allen Bradley variable frequency drive, Catalog ID 20AD011A3AYNANG0, is 7.5 horsepower. The Allen-Bradley/Rockwell Automation PF70 has a 5.5 kilowatt ND output rating. The Allen-Bradley 20AD011A3AYNANG0 AC Drive is panel-mounted. The wide variety of features offered by the 20AD011A3AYNANG0 Allen-Bradley Alternate Current Drive enables the client to successfully integrate the 20AD011A3AYNANG0 Alternate CurrentDrive into the client design & configure the Allen-Bradley 20AD011A3AYNANG0 Alternate Current Drive for the majority of application requirements.

20AD011A3AYNANNN

This innovative PowerFlex 70 series model, Catalog ID 20AD011A3AYNANNN, can quickly integrate into the users' industrial systems and equipment and manage the motor speed and motion pattern. The 20AD011A3AYNANNN requires 480 Volts AC in three phases at 50 Hertz as its input voltage. Four LEDs provide feedback to help users understand what is happening as the gadget is in use. This top-tier AC drive is designed to provide users with the greatest industrial 3-phase motor control. It has an IGBT braking system, internal filtration, and a fan cooling system.

20AD011A3AYNARC0

The IP20-rated enclosure for the C frames 20AD011A3AYNARC0 is made for panel installation. Only a vertical installation of the drive is advised. With a single-phase input, the continuous output current is 5.5 Amperes. The 20AD011A3AYNARC0 can accept input voltages from 342 to 528 Volts AC. 47 to 63 Hertz is the range of the input frequency. The range of the output frequency is 0 to 400 Hertz. 167.8 Watts dissipates the entire output power (27.8 Watts internal and 140 Watts external).

20AD011A3AYYANC1

A PowerFlex adjustable frequency AC motor is the Allen Bradley 20AD011A3AYYANC1 drive. It is manufactured as a member of the PowerFlex drive line. Vector control, Volts per Hertz control, or vector control with Force technology are all programmable control options for the 20AD011A3AYYANC1 PowerFlex 70 drive that can be used for a variety of applications, including those involving fans and extruders. These drives typically have an optional internal communication module that facilitates rapid and effective control and data transfer via interfaces to various host controllers.

20AD011A3NYNADC0

The 20AD011A3NYNADC0 drive is an Allen-Bradley PowerFlex 70 drive which controls motors in clean indoor industrial environments. This Allen-Bradley drive has an 11-Amp output current capacity. Its output power capacity is 5.5 kW or 7.5 Hp. The 20AD011A3NYNADC0 drive supports enhanced control but not feedback. It also has a brake IGBT but no brake resistor. The communication slot on the 20AD011A3NYNADC0 drive is for the DeviceNet network.

20AD011A3NYNADNN

The 20AD011A3NYNADNN drive from the Allen-Bradley PowerFlex 70 series features a panel mount (IP20) enclosure which is conformally coated and it operates at 480V AC. It has a DeviceNet slot built into it which enables it to connect to other devices through the DeviceNet network. The 20AD011A3NYNADNN drive also comes with a numeric LCD type of interface. It generates 7.5 Horsepower or 5.5 kilowatts of output power.

20AD011A3NYNAENN

The Allen-Bradley PowerFlex 70 drive, Catalog ID 20AD011A3NYNAENN, has a 7.5 horsepower rating. Additionally, it has a 5.5 kilowatt ND output rating. However, this model does not come with a handbook, a resistor option, or a feedback module (improved control). This gadget is also ineligible for the optional safe-off feature. The PowerFlex 70 drive measures 185 millimeters (7.28 inches) x 300 millimeters (11.81 inches) x 179.8 millimeters (W x H x D) with a C frame and an IP20 casing (7.08 inches). The drive weighs 15.2 pounds or 6.89 kilograms.

20AD011A3NYNANC0

The 70 line of drives, including the Product ID 20AD011A3NYNANC0, are employed in various applications and offer a wide range of features that lower costs and simplify integration into the current architecture. It has a 7.5 horsepower ND output rating. Furthermore, its kW rating is 5.5. A VFD with an adjustable frequency of 11 A. It has a C frame size and runs on 480 Volts AC power. Additionally, the 20AD011A3NYNANC0 drive is devoid of a manual and a resistor, which is common for certain drives in this group.

20AD011A3NYNANNN

The PowerFlex 70 20AD011A3NYNANNN drive is an Allen-Bradley motor control drive powered by 480V AC 3-phase input voltage. It comes with an EMC filter and a Size C frame. The 20AD011A3NYNANNN drive also comes with an HMI which is a backlit numeric LCD module. For protection from liquids, corrosion, and small amounts of dust, the 20AD011A3NYNANNN drive has an IP20 enclosure that supports panel mounting. For maximum protection, the 20AD011A3NYNANNN drive should never be used outdoors and it should be used in clean indoor environments whenever possible.

20AD011C0AYNANNN

The 20AD011C0AYNANNN drive is an Allen-Bradley PowerFlex 70 drive that can be machine-mounted or wall-mounted. It is protected by an indoor-rated and conformally-coated IP66 enclosure. The input voltage rating for the 20AD011C0AYNANNN drive is 480V AC and the input voltage must be 3-phase AC voltage. This drive does not have an interface device or an internal brake resistor. It operates with normal duty output ratings of 7.5 Horsepower, 5.5 kilowatts, and 11 Amperes.

20AD011C3AYNANC0

The Allen-Bradley 20AD011C3AYNANC0 drive is a PowerFlex 70 AC drive with enhanced control. Its heavy duty Hp rating is 5 Hp, and its normal duty Hp rating is 7.5 Hp at 480V AC and 60 Hertz. This drive operates with 3-phase/6-pulse input voltage. Its continuous output current rating is 11 Amperes. The 20AD011C3AYNANC0 drive can be mounted on a machine or a wall and it has an IP66-rated enclosure with a conformal coating.

20AD011C3AYNANNN

The 20AD011C3AYNANNN drive is an Allen-Bradley PowerFlex 70 drive with an output current capacity of 11 Amps and an input voltage rating of 480 Volts AC (3-phase). It comes in an IP66 enclosure which supports wall and machine mounting, is conformally coated, and strong enough to protect the drive from significant amounts of dust and liquids, but which is only suitable for indoor operation. The 20AD011C3AYNANNN also comes with an LCD interface, a brake IGBT, and an EMC filter.

20AD011C3AYNARC0

The 20AD011C3AYNARC0 is a PowerFlex 70 series AC drive made by Allen-Bradley to control a compatible industrial motor. It is a 3-phase AC drive which operates with a rated current of 11 Amps at 480 Volts AC of input power. The 20AD011C3AYNARC0 drive also has enhanced control but it does not include an encoder or safe torque off feature. This drive is filtered and it has an IP66 enclosure.

20AD011C3AYNARNN

The PowerFlex 70 20AD011C3AYNARNN drive is a motor-controlling drive with adjustable output frequency that was made by Allen-Bradley. It was made to operate with 11 Amps of current and 7.5 Horsepower of output at 480V AC. There is a brake IGBT installed in the 20AD011C3AYNARNN drive, but no brake resistor. The enclosure of the 20AD011C3AYNARNN drive protects it from liquids and debris, and this enclosure is IP66-rated and it supports wall and machine-mounting.

20AD011C3AYYANC0

The PowerFlex 70 20AD011C3AYYANC0 is an Allen-Bradley drive with adjustable frequency that comes with a brake resistor, a brake IGBT, and an IP66 enclosure. It also comes with enhanced control, but this enhanced control option does not include encoder feedback or safe torque off features. The 20AD011C3AYYANC0 drive is powered by 480V AC 3-phase input voltage and it produces normal duty output power ratings of 5.5 kilowatts or 7.5 Horsepower.

20AD011C3AYYANNN

This Allen-Bradley/Rockwell Automation 20AD011C3AYYANNN PowerFlex 70 AC drive has a 7.5 HP (5.5 kW) output power rating. This drive is a variable frequency drive and it controls motors with its variable frequency. The 20AD011C3AYYANNN drive comes with a resistor and an IGBT for braking. Its enclosure is a conformally coated and IP66-rated enclosure. The 20AD011C3AYYANNN drive has a 480 Volts AC input voltage rating.

20AD011F0AYNANNN

The Allen-Bradley PowerFlex 70 20AD011F0AYNANNN drive uses AC input voltage and it supports Horsepower and kilowatt output. Its AC input voltage rating is 480 Volts (3-phase), its Horsepower output rating is 7.5 Horsepower and its kilowatt output rating is 5.5 kilowatts. The 20AD011F0AYNANNN drive is protected by an IP20 enclosure in the front and by an IP66 enclosure in the rear. This filtered drive has standard controls.

20AD014A0AYNACC0

The 20AD014A0AYNACC0 is an AC drive by Allen Bradley. It is part of the PowerFlex 70 series. And it has an input voltage of 480 Volts AC (3-phase) and a current rating of 14 Amps. The drive has a power output of 10 horsepower or approximately 7.5 kilowatts. It is a size C frame unit with an IP20 NEMA/UL Type 1 enclosure and panel mounting. And it has an emission filter, ControlNet (Coax) port, and enhanced control.

20AD014A0AYNACNN

This 7.5 Kilo-Watts Allen-Bradley/Rockwell Automation PF70, Catalog ID 20AD014A0AYNACNN, has a 10 HP ND output rating. The PowerFlex 70 controllers can easily program and configure the drive using this feature following the application's needs. Various frames and enclosures are used to house this drive, giving customers a wide range of options for finding the perfect fit. This drive is generally reliable in a complicated industrial system and doesn't take up much room.

20AD014A0AYNADC0

The Allen-Bradley 20AD014A0AYNADC0 motor control AC drive is a PowerFlex 70 series AC-powered motor control drive. Its control technology is enhanced. The 20AD014A0AYNADC0 drive features a brake IGBT, but not a brake resistor. It also features a DeviceNet port. The 20AD014A0AYNADC0 drive's normal duty ratings include 14 Amps of output current and 7.5 kilowatts/10 Horsepower of output power at 480V AC. This drive can be panel-mounted and its IP20-rated enclosure has a conformal coat.

20AD014A0AYNADNN

This Allen-Bradley adjustable frequency drive, Catalog ID 20AD014A0AYNADNN, has a 14 amperes Alternate Current drive rating. It can produce 7.5 kW of power. This PowerFlex 70 features a DeviceNet communication (20-COMM-D) unit and a horsepower ND output rating of 10 HP, so you can easily communicate with other devices. It is IP20 and features a panel mount. Because there is no keypad unit installed in this drive, the lid is blank. Only a competent individual with experience installing variable frequency Alternate Current drives should install the 20AD014A0AYNADNN drive.

20AD014A0AYNAEC0

This 14 Amperes Allen Bradley drive, Catalog ID 20AD014A0AYNAEC0, has a 7.5 kilo-watts rating. This PowerFlex Alternate Current drive also has a 10-horsepower motor. This particular PF70 has a frame size of C. A new and improved central processing unit controls it. The HIM module has been removed and replaced with a blank cover and 480 VAC 3-phase power. IGBT bake-type transistors without a fitted braking resistor are also included in the drive.

20AD014A0AYNAENN

The PowerFlex 70 20AD014A0AYNAENN drive from Allen-Bradley has a 10-Horsepower output power rating and a 480V AC input power rating. The type of input voltage that it uses is 3-phase and 6-pulse AC voltage. The 20AD014A0AYNAENN drive has a standard type of control option and an Ethernet communication option. There is no interface option on this drive except for a protective blank cover. The 20AD014A0AYNAENN drive has a filter.

20AD014A0AYNANC0

The 20AD014A0AYNANC0 drive is a 3-phase AC drive from the Allen-Bradley PowerFlex 70 series. Its voltage rating is 480V AC. In a normal duty application, the 20AD014A0AYNANC0 drive produces 10 Horsepower of maximum output. In a heavy-duty application, this drive produces 7.5 Horsepower of maximum output. The 20AD014A0AYNANC0 drive's highest supported output current rating is 22 Amps for 3 seconds. The continuous current rating of the 20AD014A0AYNANC0 drive is 14 Amps.

20AD014A0AYNANNN

The Allen-Bradley 20AD014A0AYNANNN drive is a PowerFlex 70 drive with a filter and with standard control options. This drive also has a brake IGBT, but it does not have a brake resistor. The 20AD014A0AYNANNN drive's voltage rating is 480 Volts AC. It is a 3-phase and 6-pulse type of AC drive. The 20AD014A0AYNANNN drive's ND output current rating is 14 Amps and its ND output power ratings are 10 Hp and 7.5 kW.

20AD014A0NYNACC0

The 20AD014A0NYNACC0 by PowerFlex 70 is a variable frequency drive (VFD). It has a rated power of 10 horsepower (HP) and a current rating of 14 Amps. It is capable of delivering a maximum power output of 7.5 kilowatts. It is designed to be panel mounted and has an IP20 rating, indicating that it is protected against solid objects larger than 12.5 mm and is not protected against water. The VFD uses a C frame size and requires a 480 VAC (50 Hz) power supply.

20AD014A0NYNACNN

The 20AD014A0NYNACNN is an AC drive designed for power and control in a compact package. It is a PF 70 unit by Allen Bradley. It is a 3-phase unit. It is designed to handle 480 volts (3-phase) and 10HP and 14A output ratings. Its simple design ensures maximum reliability and ease of use, while its range of features allows it to be easily configured to meet specific needs. Aside from that, the enhanced control option provides additional control and safety features to the drive.

20AD014A0NYNADC0

The Allen Bradley 20AD014A0NYNADC0 has a 10 horsepower ND output rating. This drive has an additional kW capacity of 7.5. This AC drive has a 14-ampere current rating and operates on 480-volt, three-phase power. The frame size is a standard C. A panel-mount IP20 container protects the device. The 20AD014A0NYNADC0 is an efficient, all-in-one solution due to its small form factor and built-in EMC filtration. The Powerflex 70 series LCD HMI, which can display text in several different languages, is also compatible with this module.

20AD014A0NYNADNN

The Allen-Bradley 7.5 kilowatt PF70, Catalog ID 20AD014A0NYNADNN, has a 10 horsepower HP ND output rating. It can be machine mounted or panel installed over the brackets already in place, but in both cases, it needs to be positioned in a protected location against splashing water. In addition, this AC drive can produce a maximum of 14 A of current. A DeviceNet communication card (20-COMM-D) is included. This PowerFlex 70 is 480V AC powered and has an IP20 panel mount enclosure. This VFD ships with a blank cover in place of the ethernet interface.

20AD014A0NYNANC0

The output rating of the Allen Bradley drive, Catalog ID 20AD014A0NYNANC0, is 14 Amperes. The kW rating of this changeable frequency drive is also 7.5. With a 10 HP rating, this PowerFlex 70 AC drive is a powerful option. Powering this PowerFlex 70 is 480 VAC (50 Hz). This PF70 is a size C frame unit housed in a panel mount (IP20) enclosure and does not include a HIM. Stop, start, jog, alarm signaling, local control, and preset frequencies are all handled by their respective I/Os. Analog inputs/outputs are compatible with industrial automation devices rated from 0 to 10 Volts and 4 to 20 mA.
Previous 1

...

4

5

6

...

16 Next

Displaying 50 of 756 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP