GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Drives

1336 PLUS II Drives

The 1336 PLUS II by Allen Bradley provides adjustable frequency AC drives that provide ratings from 0.37-448 kW (0.5-600 HP) in three different voltage ranges of 200-240V AC, 380-480V AC, and 500-600V AC. Throughout this family of drives, simplicity in the designing and programming is consistent with an easy-to-read display, easy programming parameters, simple tuning, serial communication, common assembly parts, and compact packaging. Some special functions that can be found in the 1336 PLUS II drives are Auto Economizer, process PI controller, traverse function, selectable fault reset & run, auto restart on power up, speed sensitive electronic overload, auto-tuning, and step logic. The drive operations include Sensor-less vector control, selectable volts/hertz mode, and multi-lingual selection. The sensorless vector control system gives the drives a background of powerful algorithms, handling tough applications that other drives can’t. Both sensorless vector control and V/Hz mode provide outstanding 3-phase motor control. The multi-lingual option makes it easy to program the drives. These drives are very secure and protective as they process any fault or error status in real-time and report the findings. This is a continuous cycle; throughout the sequence, the drive will keep searching for potential faulty conditions. They also comply with NEMA and European standards and can be used worldwide. With a digital programmable feature within the drives, they can be programmed to perform tasks precisely and accurately. This feature gives a much higher control and flexibility to issue control through the Human Interface Module or serial communications port. A configurable I/O allows simple connections to be programmed and used in control applications as required.

1336 PLUS II Adjustable Frequency AC Drive Selection Guide

Adjustable frequency AC drives are widespread in many industries, including manufacturing, material handling, and process control. These drives use electronic controls to alter the frequency of the electrical power supplied to the motor, which in turn changes the speed of the motor. This allows for precise control over the motor's speed and efficient operation of the equipment it powers. Adjustable Frequency AC drives offer many benefits over traditional mechanical methods of speed control, including improved energy efficiency, better speed regulation, and increased reliability.

To ensure the optimal control of a motor, Allen Bradley 1336 Plus II Series Drives offer a diverse and finely tuned line of AC drives with Sensorless Vector Control/Volts per Hertz control. These products were created to provide speed control solutions for many applications and include the tuning capabilities necessary for unique needs. However, do not worry - this detailed guide has got covered!

This will address all aspects of these great devices in detail so one can pick the right one to suit the specific needs.

Overview of 1336 PLUS II Drives

The 1336 PLUS II drive series by Allen-Bradley is an accessible and efficient line of AC drives. With a suite of available adjustments, sensors, interfaces, and customization options that are universal throughout the product line - these models ensure easy integration, installation, operation, training, and upkeep for all environments or situations.

The 1336 PLUS II motors range includes voltages spanning from 200VAC to 240VAC, 380VAC to 480VAC, and 500VAC to 600 VAC. 9 different frame sizes (A1, A2, A3, A4, B1, B2, C, D, and E) permit this product to be used in stationary or mobile applications. This series of PLUS II motors has been programmed with an adjustable PWM frequency with an adjustable voltage output for adjustments depending on load requirements, therefore providing the industry with the desired performance necessary at all times.

To make things easier, this guide will divide the 1336 Plus II into three classes based on voltage, i.e., 220-240V, 380-480V, and 500-600V. It is important to note that all products under any class are equipped with a particular "enclosure type". (This is different from the frame sizes discussed above. Frame sizes give the dimensions of the enclosure, while enclosure type provides the type/quality/presence of the enclosure.)

These drives come with the following enclosures. Depending on the two-digit alphabetic code at position 4 of the product catalog number, you can know about the drive’s enclosure.

  • Code: AA
    • Type: IP 20 (NEMA 1)
    • Description: An enclosure with a type IP20 (NEMA 1) rating is designed for indoor use. It protects against accidental contact with live parts inside the enclosure, but it is not sealed against the ingress of solid objects, dust, or water.
  • Code: AE
    • Type: IP 20 (NEMA 1) / EMC
    • Description: An enclosure with a type IP20 (NEMA 1)/EMC rating is an indoor electrical enclosure that provides a degree of protection against accidental contact with live parts inside the enclosure, and it has been designed to minimize the emission of EMI and to provide some level of immunity to EMI from external sources.
  • Code: AF
    • Type: IP 65 (NEMA 4)
    • Description: An enclosure with a type IP65 (NEMA 4) rating is designed for outdoor use and provides a high level of protection against dust and water ingress. It is suitable for use in environments where the enclosure may be exposed to low-pressure water jets from all directions.
  • Code: AJ
    • Type: IP 54 (NEMA 12)
    • Description: An enclosure with a type IP54 (NEMA 12) rating is designed for indoor and industrial use and provides a moderate level of protection against dust and water ingress.
  • Code: AN
    • Type: IP 00 (Open)
    • Description: An enclosure with an IP00 rating is considered an "open" enclosure, as it does not protect against the ingress of any external objects or substances.

It is also significant to know that every adjustable frequency AC drive from Allen Bradley comes with a specific language module. The language module of any drive can be determined from a 2-digit code at position 5 of the product catalog number.

  • Language Code: EN
    • Language: English
    • Applicability: All drives
  • Language Code: FR
    • Language: French
    • Applicability: All drives
  • Language Code: DE
    • Language: German
    • Applicability: All drives
  • Language Code: IT
    • Language: Italian
    • Applicability: All drives
  • Language Code: JP
    • Language: Japanese
    • Applicability: All drives
  • Language Code: ES
    • Language: Spanish
    • Applicability: All drives

These drives are categorized into the following categories based on their voltages. The voltage class of each drive is classified at position 2 as a 2-digit alphabetic code of the product catalog number.

220V-240V AC & 310V DC Drives (code: AQ, A, Q)

These drives are available in a wide range of ampere ratings, from 2.3A to 325A, and KW ratings, from 0.37KW to 93KW, to suit the needs of different motor sizes and applications.

This 1336 Plus II series is compatible with all enclosure types, making it suitable for various environments and applications. The "AQ" models of the 1336 Plus II series offer support for both 310V DC and 220-240V AC, while the "A" models are only designed for use with 220-240V AC, and “Q” models are just compatible with 310V DC. These drives are user-friendly and feature built-in protection against electrical noise to ensure smooth and reliable operation. To have a more comprehensible view, the product range is as follows:

  • AQF05-AN/AA/AF/AJ – AQF75-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC or 310V DC
    • Ampere Rating Range: 2.3A - 22A
    • Kilowatt Rating Range: 0.37kW - 5.5kW
    • Horsepower Rating Range: 0.5Hp - 7.5Hp
  • A007-AN/AA/AF/AJ – A125-AN/AA/AF/AJ
    • Voltage Class: 220V-240V AC
    • Ampere Rating Range: 22A - 325A
    • Kilowatt Rating Range: 5.5kW - 93kW
    • Horsepower Rating Range: 7.5Hp - 125 Hp

380V-480V AC & 513V-620V DC Drives

This voltage class of 1336 Plus II drives is suitable for use with input voltages between 380V and 480V AC or 513V to 620V DC. The drives in this voltage class are available in both constant and variable torque models, with ampere ratings ranging from 1.1A to 670A and KW ratings ranging from 0.37KW to 448KW.

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "BR" models of the 1336 Plus II series offer support for 513V-620V DC, while the "B" models are designed for use with 380-480V AC. The "BP/BPR" models are specially enclosed in "F" frames, and the "BX" models have a special rating.

The voltage class of 380V-480V is used in various industrial and commercial applications, including manufacturing, material handling, and pump and fan control. These drives also control the speed and torque of various AC motor types, including induction motors, synchronous motors, and servo motors.

The product range of this class can be described as follows:

  • BRF05-AN/AA/AE/AF/AJ – BRF200-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC or 513-620V DC
    • Ampere Rating Range: 1.1A or 1.2A (constant/variable torque) – 27A
    • Kilowatt Rating Range: 0.37kW – 15kW
    • Horsepower Rating Range: 0.5Hp – 20Hp
  • B015-AN/AA/AE/AF/AJ – B600-AN/AA/AE/AF/AJ
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 24.2A or 27A (constant/variable torque) – 670A
    • Kilowatt Rating Range: 11kW or 15kW (constant/variable torque) – 448kW
    • Horsepower Rating Range: 15Hp or 20 Hp (constant/variable torque) – 600Hp
  • BP250-AN/AA/AE – BPR450-AN/AA/AE
    • Voltage Class: 380V-480V AC
    • Ampere Rating Range: 325A or 360A (constant/variable torque) – 532A
    • Kilowatt Rating Range: 187kW or 336kW  (constant/variable torque) – 448kW
    • Horsepower Rating Range: 250Hp or 300 Hp (constant/variable torque) – 450Hp

500V-600V AC & 775V DC Drives

The 500-600V Allen Bradley 1336 Plus II AC drives are dependable and high-performing drive series for accelerating electric motors in different commercial applications. This voltage rating of the 1336 Plus II makes it possible for this product to be used with input voltages between 500V and 600V AC, which suits a wide range of application needs. With amperage ratings starting at 2.0A up to 600A, these products can work well with just about any size motor while still being practical enough to withstand all load conditions - even when operated on frequencies as low as 30Hz!

These drives are compatible with all enclosure types and suitable for use in various environments and applications. The "CW" models of the 1336 Plus II series offer support for 775V DC, while the "C" models are designed for use with 500-600V AC. The "CP/CPR" models are specially enclosed in "F" frames. The detailed product range of this voltage class is given below:

  • CWF10-AN/AF/AA/AJ – CWF200-AN/AF/AA/AJ
    • Voltage Class: 500-600V AC or 775V DC
    • Ampere Rating Range: 2.0A – 24A
    • Kilowatt Rating Range: 0.75kW – 15kW
    • Horsepower Rating Range: 1Hp – 20Hp
  • C025-AN/AF/AA/AJ – C600AAN/AF/AA/AJ
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 30A – 600A
    • Kilowatt Rating Range: 18.5kW – 448kW
    • Horsepower Rating Range: 25Hp – 600Hp
  • CP350/CPR350-AN/AA – CP450/CPR400-AN/AA
    • Voltage Class: 500-600V AC
    • Ampere Rating Range: 350A – 400A
    • Kilowatt Rating Range: 261kW – 298kW
    • Horsepower Rating Range: 350Hp – 400Hp

Features of 1336 PLUS II Drives

llen Bradley 1336 Plus II drives are highly versatile and reliable adjustable frequency drives that offer a wide voltage range and multiple control modes, making them suitable for various industrial applications. They also have a user-friendly interface and built-in setup wizard that makes it easy to configure for specific needs. In addition, the 1336 Plus II drives have robust design features that make them suitable for use in harsh industrial environments, including a NEMA Type 1 enclosure and surge and EMI filters. Its built-in communication capabilities allow for remote monitoring and control, making it an ideal choice for a wide range of corporate applications.

Some highlighter features are given:

Communication Options:

There are several communication options available for the 1336 Plus drive, which can be used to monitor and control the drive remotely. These options include:

  • Single Point Remote I/O B Frame: This communication option allows the driver to communicate with other devices using a single point remote I/O link. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • RS-232/422/485: This serial communication protocol allows the drive to communicate with other devices using a standard serial interface. It can exchange data with other devices, such as PLCs, HMIs, and PCs.
  • DF1 & DH485 B Frame: These communication protocols connect devices in an industrial control system. They allow devices to communicate with each other using a common data link and protocol.
  • DeviceNet: This field bus system is used to connect devices in an industrial control system. It allows devices to communicate with each other using a common data link and protocol.
  • Enhanced DeviceNet: This is an enhanced version of the DeviceNet field bus system that provides additional features and capabilities. It allows devices to communicate with each other using a common data link and protocol.

In general, these communication options are used to monitor and control the drive remotely and to exchange data with other devices in the control system. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Communication Options - B Frame & Up (Adapter 6)
  • Option Code: GM1
    • Description: Single Point Remote I/O B Frame
  • Option Code: GM2
    • Description: RS-232/422/485, DF1 & DH485 B Frame
  • Option Code: GM5
    • Description: DeviceNet
  • Option Code: GM6
    • Description: Enhanced DeviceNet
Communication Options - All Frames (Adapter 1)
  • Option Code: GMS1
    • Description: GM1 with Snap-In Cradle
  • Option Code: GMS2
    • Description: GM2 with Snap-In Cradle
  • Option Code: GMS5
    • Description: GM5 with Snap-In Cradle
  • Option Code: GMS6
    • Description: GM6 with Snap-In Cradle

Control Interface Options:

The 1336 Plus II drive offers several control interface options that can be used to connect the drive to external control devices, such as PLCs, HMIs, and sensors. These options include:

  • TTL Contact: This control interface option allows the drive to be controlled using a digital input signal. The drive can be connected to a device, such as a PLC or HMI, using a digital input signal, which can be used to start, stop, or control the speed of the drive.
  • TTL Contact & Encoder Feedback: This is a control interface option that allows the drive to be controlled using a digital input signal and receive feedback from an encoder. The encoder can be used to provide feedback on the speed and position of the motor, which can be used to control the drive or monitor its performance.
  • 24V/115V AC/DC & Encoder Feedback: This control interface option allows the device to be controlled using a 24V or 115V AC/DC input signal and receives feedback from an encoder. The encoder can provide feedback on the speed and position of the motor, which can be used to control the device or monitor its performance. Some control interfaces work fine without encoder feedback too.

These control interface options are generally used to connect the drive to external control devices and exchange data with these devices. They can be used to set parameters, monitor drive performance, and troubleshoot issues.

Control Interface Options - All Drives
  • Option Code: L4
    • Descriptions: TTL Contact
  • Option Code: L4E
    • Descriptions: TTL Contact & Encoder Feedback
  • Option Code: L7E
    • Descriptions: TTL Contact & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L5 2
    • Descriptions: 24V AC/DC
  • Option Code: L5E 2
    • Descriptions: 24V AC/DC & Encoder Feedback
  • Option Code: L8E
    • Descriptions: 24V AC/DC & Encoder Feedback for use with Encoder Loss Detection
  • Option Code: L6
    • Descriptions: 115V AC
  • Option Code: L6E
    • Descriptions: 115V AC & Encoder Feedback
  • Option Code: L9E
    • Descriptions: 115V AC & Encoder Feedback for use with Encoder Loss Detection

Protective Features:

To protect the drive and the motor it controls, the 1336 Plus II drives include several protective features. These features include:

  • Undervoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it falls below a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is unstable.
  • Overvoltage: This protective feature monitors the voltage supplied to the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Drive Overcurrent: This protective feature monitors the current flowing through the drive and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overtemperature: This protective feature monitors the drive's temperature and shuts it down if it exceeds a certain level. This can help to prevent damage to the drive or the motor if the temperature becomes too high.
  • External Signal: This protective feature allows the drive to be shut down using an external signal, such as a command from a PLC or HMI. This can be used to shut down the drive during emergencies or maintenance.
  • Drive Output Short: This protective feature monitors the drive's output and shuts it down if a short circuit is detected. This can help to prevent damage to the drive or the motor if the output is shorted.
  • Ground Fault: This protective feature monitors the ground connection of the drive and shuts it down if a fault is detected. This can help to prevent damage to the drive or the motor if the ground connection is faulty.
  • Encoder Loss: This protective feature monitors the encoder input of the drive and shuts it down if the encoder signal is lost. This can help to prevent damage to the drive or the motor if the encoder fails or is disconnected.
  • Overcurrent Stall: This protective feature shuts down the drive if the current flowing through the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the current flow is too high.
  • Overvoltage Stall: This protective feature shuts down the drive if the voltage supplied to the motor exceeds a certain level for an extended period. This can help to prevent damage to the drive or the motor if the voltage supply is too high.
  • Six Drive Alarms: The 1336 Plus II drive includes six drive alarms that can alert the operator of issues with the drive or the motor. These alarms can be programmed to trigger based on specific conditions, such as a high temperature or an overcurrent condition.
  • Fault Reset Input: This protective feature allows the operator to reset the drive after a fault has been detected. This can be done using an external signal, such as a command from a PLC or HMI.

In general, these protective features are designed to help prevent damage to the drive and the motor it controls and to alert the operator if there is an issue with the drive or the motor. They can be used to ensure the drive's reliability and safety in various industrial applications.

Special Functions:

1336 Plus II Drives include several special functions that can be used to enhance its performance and capabilities. These particular functions include:

  • Auto Economizer: This function allows the drive to operate in an energy-efficient mode, where it adjusts the speed of the motor to match the load demand. This can reduce energy consumption and improve the efficiency of the drive.
  • Process PI Controller: This function allows the drive to control the speed of the motor using a proportional-integral (PI) controller. The PI controller adjusts the speed of the motor based on the difference between the setpoint and the motor's actual speed.
  • Traverse Function: This particular function allows the drive to control the speed of the motor in a precise, step-by-step manner. It can be used to control the speed of the motor in applications where precise control is required, such as in positioning or handling systems.
  • Selectable Fault Reset & Run: This allows the operator to select whether the drive will reset or run after a fault has been detected. This can be useful in applications where it is crucial to keep the drive running, even if a fault has been detected.
  • Auto Restart on Power Up: This function allows the drive to restart automatically after a power failure or interruption. This can be useful in applications where it is crucial to keep the drive running, even if there is a power interruption.
  • Speed Sensitive Electronic Overload: This function allows the drive to monitor the current flowing through the motor and adjust the speed of the motor to prevent an overload condition. This can help to protect the drive and the motor from damage due to high current levels.
  • Auto-tuning: This function allows the drive to automatically adjust its control parameters to optimize the performance of the motor. It can be used to improve the drive's accuracy and stability and reduce the time required to set up the drive.
  • Step Logic: This special function allows the drive to be programmed to perform specific actions based on a set of conditions or events. It can be used to control the speed of the motor in a precise, step-by-step manner and to perform specific tasks based on specific conditions.

In general, these special functions can be used to enhance the performance and capabilities of the 1336 Plus drive and tailor it to the application's specific needs. They can be used to improve the drive's accuracy, stability, and efficiency and add additional functionality and control to the drive.

Conclusion

In conclusion, the Allen-Bradley 1336 Plus II drives are a reliable and versatile choice for controlling the speed and torque of three-phase AC motors. When selecting a 1336 Plus II drive, it is essential to consider the application's specific needs, as well as the available communication options, control interface options, and special functions. By considering these factors, it is possible to select a 1336 Plus II drive that is well-suited for the application, and that can provide the performance and functionality required.

Browse our selection of 1336 PLUS II Drives units

AutomationStop.com's online catalog offers one of the largest selections of preowned 1336 PLUS II Drives units in the world.

1336F-BRF10-AA-EN-HAS2

The 1336F-BRF10-AA-EN-HAS2 AC/DC-powered drive is an Allen-Bradley 1336 PLUS II AC/DC-powered drive. It can be powered with 380 to 480 Volts of AC voltage or with 513 to 620 Volts of DC voltage. The 1336F-BRF10-AA-EN-HAS2 drive features a snap-in human-machine interface as a programming device. This human-machine interface can also serve as a control device. The 1336F-BRF10-AA-EN-HAS2 drive produces 0.75 kW or 1 Hp of output when it operates.

1336F-BRF10-AA-EN-HAS2-L6

The Allen-Bradley/Rockwell Automation 1336F-BRF10-AA-EN-HAS2-L6 drive can function with 513 to 620V DC or with 380 to 480V AC of input voltage. This 1336 PLUS II series drive can also function with up to 1 Horsepower of nominal output. The 1336F-BRF10-AA-EN-HAS2-L6 drive can be programmed and controlled with its human-machine interface. It also has a control interface with 9 control inputs. The 1336F-BRF10-AA-EN-HAS2-L6 drive only operates in English.

1336F-BRF10-AA-EN-HAS2-LA1-L6

This Allen Bradley drive, Product ID 1336F-BRF10-AA-EN-HAS2-LA1-L6, features a digital pot and an IP20-rated human-machine interface module with programmer/controller capabilities. The 1336F-BRF10-AA-EN-HAS2-LA1-L6 drive also features an IP20-rated shell that protects it from tiny solid objects but does not provide any protection from oils or other liquids. The drive's output frequency ranges from a minimum of 0 Hertz to a peak of 400 Hertz, just like other Allen-Bradley Alternate Current 1336F drives. The analog interface (Slot B) of the 1336F-BRF10-AA-EN-HAS2-LA1-L6 provides non-isolated and one single-ended programmable input that houses the potentiometer.

1336F-BRF10-AA-EN-HASP-L4

The Allen Bradley rotor, Catalog ID 1336F-BRF10-AA-EN-HASP-L4, has an embedded TTL contact control Input/Output board & conformal-coated PCBs that allow it to fit into an IP20-certified enclosure. A microprocessor that performs sensorless control (vector), monitors the measurement of the bus voltage, & scans for potential rotor overloads makes up the drive's main component. Its dimensions are only 8.50 inches by 11.42 inches by 6.30 inches for the 1336F-BRF10-AA-EN-HASP-L4. It preserves panel space while providing superior speed and torque control.

1336F-BRF10-AA-EN-HCS2-L6

This industrial drive, Catalog ID 1336F-BRF10-AA-EN-HCS2-L6, comes with a snap-in mounted Human-Module adapter with an upload/download function, digital potentiometer, and display. It also features a built-in 115 Volts Alternate Current control connection option. An HMI module is built into this Alternate Current drive with several features. The programming keys for the process control are located on the 2-line LCD of this human-machine interface. A digital voltmeter, jog, start, stop and reverse keys are also included. Direction and speed indicators round out this extensive set of interface options.

1336F-BRF10-AA-EN-HCS2-L9E

The industrial motor, Product ID 1336F-BRF10-AA-EN-HCS2-L9E, is part of the 1336 PLUS II family of frequency-adjustable drives from Allen Bradley. Drives in this series include a 97.5% efficiency score and a 200,000 amperes RMS symmetrical short circuit power rating. The 1336F-BRF10-AA-EN-HCS2-L9E contains an encoder feedback unit as one of its control interface features for detecting encoder loss. Like other Allen Bradley 1336 PLUS II modules, the 1336F-BRF10-AA-EN-HCS2-L9E drive is primarily intended to be driven by a 3-phase voltage source.

1336F-BRF10-AA-EN-L4

The Allen Bradley 1336F-BRF10-AA-EN-L4 module may experience a variety of faults, including the auxiliary error (occurring when the additional input interlock is open), internal microprocessor error, EEPROM checksum error (occurring when the read EEPROM checksum doesn't match the calculated EEPROM checksum), and EEPROM fault. The "fault clear mode" parameter needs to be set to "enabled" for the error to be removed from the paired control interface. Additionally, a "clear fault" instruction can be sent from a linked serial device.

1336F-BRF10-AE-DE

The Allen Bradley 1336F-BRF10-AE-DE has a potent algorithm that offers unmatched performance. It features a constant speed torque range of 120:1, starting acceleration, and running torque that is all over 250%. This Allen Bradley drive can now handle even the most demanding applications. The drive also has a variety of security features. It has protection against overheating and motor overload. This feature protects the drive against overload and high-temperature damage.

1336F-BRF10-AE-EN

This Frame-A1 Adjustable Frequency Drive by Allen Bradley, Model ID 1336F-BRF10-AE-EN, has enclosures protected with IP20/NEMA 1 standards. The drive gives off 0.75-kilowatt output while it is operational on supplies of 380 to 480 Volts AC or 513 to 620 Volts DC. The drive weighs approximately 4 kilograms. The user-selectable output voltage range for this drive is 0 to the rated motor voltage, and it has two independently programmable acceleration and deceleration speeds between 0 and 3600 seconds. This drive offers users parameters in a standard English language text format and has conventional digital and analog I/O configurations for various tasks.

1336F-BRF10-AE-EN-GMS1-L6

The 1336F-BRF10-AE-EN-GMS1-L6 drive contains advanced features such as an I/O control board (115 Volts Alternate Current), EMC filtering, & sensorless vector control. It is more powerful than the bulk of other Alternate Current drives on the market. Fuse protection is required for the Allen Bradley 1336F-BRF10-AE-EN-GMS1-L6 Alternate Current drive when connected to a power supply that is either 380 to 480 Volts Alternate Current or 513 to 620 Volts Direct Current.

1336F-BRF10-AE-FR

The Allen Bradley 1336F-BRF10-AE-FR Alternate Current motor is a single, feature-rich solution that will replace numerous pointless components that use antiquated technologies. The 1336F-BRF10-AE-FR 3-phase drive has an operating voltage range of 380 - 480 Volts Alternate Current or 513 to 620 Volts Direct Current with a nominal power output of 0.75 kilowatts or 1 Horsepower. The drive has been adapted for French since it has a manual printed in French and is programmed in French by default.

1336F-BRF10-AE-IT

With the 1336F-BRF10-AE-IT PLUS II drive, you may control speed precisely and brake suddenly. Since its logic & power components are segregated, it operates quietly. It has several fault handling and warning mechanisms that guarantee a problem-free operation for the duration of its runtime. The IP20 (NEMA 1) casing of the 1336F-BRF10-AE-IT drive is appropriate for use in various work situations, although it should not be directly exposed to corrosive gases, mist, dust, or precipitation.

1336F-BRF10-AN-EN-HAS2

The Allen Bradley 1336F-BRF10-AN-EN-HAS2 1336 PLUS II motor has several motor control algorithms built to accommodate most industrial applications. It has selectable Volts per Hertz control technique, sensorless vector control, a flying start feature, and sensorless vector control, which are suitable for applications where the drive must be connected to rotating loads. Its "run on power up" functionality is perfect for applications requiring an unattended operation. The 1336F-BRF10-AN-EN-HAS2 PLUS II drive includes an English language pre-installed protocol and an IP00 (open) enclosure.

1336F-BRF10-AN-EN-HAS2-L4E

The drive in question, model number 1336F-BRF10-AN-EN-HAS2-L4E, has both a short circuit and a ground fault trip. For short circuit and ground fault trips, it has a phase-to-phase configuration on the drive output and a phase-to-ground arrangement on the drive output, respectively. The 1336F-BRF10-AN-EN-HAS2-L4E module controls low-speed torque using sensorless rotor control algorithms. It can easily meet the demands of the toughest load by offering superior acceleration management for up to 250% of acceleration/breakaway torque.

1336F-BRF10-AN-EN-HAS2-L9E

The Product ID 1336F-BRF10-AN-EN-HAS2-L9E is a general-purpose drive that operates on 3-phase supply systems with symmetrical line voltages. Additionally, surge suppression devices are available to safeguard the drive from over-voltages caused by lighting between the ground & line. The operational voltage range of the 1336F-BRF10-AN-EN-HAS2-L9E variable frequency drive is 513 - 620 Volts Direct Current or 380 - 480 Volts Alternate Current. The drive is only rated for one horsepower. Phase-to-ground & phase-to-phase safety levels that adhere to IEEE 587 criteria are guaranteed by the Metal Oxide Varistor (MOV).

1336F-BRF10-AN-EN-HCS2-L6

The Allen Bradley 1336F-BRF10-AN-EN-HCS2-L6 drive uses 3-phase induction motors and can work with input voltages ranging from 513 to 620 Direct Current or 380 to 240 volts of Alternate Current. Furthermore, the drive's nominal power output is 0.75 kilowatts or one horsepower. The IP00 (Open) type enclosure of the 1336F-BRF10-AN-EN-HCS2-L6 drive has English as its default language. This drive also features an optional component in a human-machine interface (HMI) used for sophisticated programming and configuring the drive's features for a particular operation.

1336F-BRF10-AN-EN-L6

The 1336F-BRF10-AN-EN-L6 variable frequency Alternate Current drive incorporates safety features, i.e., a heatsink thermistor monitored by a trip on the microprocessor, an under & overvoltage trip which allows the drive to function at 280 - 570 Volts Alternate Current, and a nominal bus voltage of 648 Volts Direct Current. The 1336F-BRF10-AN-EN-L6 variable frequency Alternate Current drive's primary use is to regulate the speed of motors in machines like conveyors, pumps, and other tools that need a variable speed & torque.

1336F-BRF150-AA-EN

Part Number 1336F-BRF150-AA-EN is a compact and powerful motor drive with a 1.5 HP (nominal) and 1.2 kW output power rating. It has a three-phase voltage rating of 380-480V AC or 513-620V DC, making it suitable for various applications. The A1 frame drive comes in an IP-20 (NEMA 1) enclosure, making it suitable for use in environments with a risk of dust and other particles entering the drive. This drive is designed for easy integration into existing systems.

1336F-BRF150-AA-EN-GMS1

The Allen Bradley device offers several features, product ID 1336F-BRF150-AA-EN-GMS1, such as vector control (sensorless and open circuit with auto-tuning) & Volt per Hertz command, as well as flexible programmable analog inputs & outputs (0 - 10 Volts, 10 Volts, 0 -20 milli-amperes), flying start programming, S-curve acceleration & deceleration & PI control algorithms. Load loss recognition, proactive power limiting, & configurable electronic overload protection are used to provide reliable protection.

1336F-BRF150-AA-EN-GMS1-L6

The Product ID 1336F-BRF150-AA-EN-GMS1-L6 Variable Frequency Alternate Current Drive is one of the PLUS 1336 II drives that gives diagnostics (real-time) for fault & custom status reporting. This enables the operator to make fast and informed decisions on the factory floor. These Allen Bradley drives allow users to make the appropriate adjustments because they are alphanumerically configurable. The 1336 PLUS II drives series has a range of variances, yet all of the devices in this line-up come with readily available common components for consistent repair & assembly.

1336F-BRF150-AA-EN-GMS5

The Product ID 1336F-BRF150-AA-EN-GMS5 drive should operate in an environment with a temperature span of 0 - 50 degrees in Celsius. These environmental requirements must be satisfied to ensure smooth motor operations and safeguard the drive's overall life. The programming language for the Allen Bradley 1336F-BRF150-AA-EN-GMS5 variable-frequency drive is English. By selecting several Allen Bradley language packs, this language can be further customized. Additionally, a GM5 connection module is included with this drive.

1336F-BRF150-AA-EN-GMS5-L8E

The Catalog ID 1336F-BRF150-AA-EN-GMS5-L8E, Plus II drive's dynamic current management allows it to start low-inductance motors, and its IP20 (NEMA Type 1) casing is designed to satisfy the needs of various work situations. The 1336F-BRF150-AA-EN-GMS5-L8E II PLUS drive's configurable Volts per Hertz control provides the best performance in industrial applications that call for a single drive to control several rotors, regardless of the variation in motor size. This drive includes seven preset speeds and diagnostic tools that can selectively identify potential problems and perform maintenance work in real-time without shutting down the drive.

1336F-BRF150-AA-EN-GMS6-L5

The Product ID 1336F-BRF150-AA-EN-GMS6-L5 Allen Bradley Drive is effectively immune to externally induced interference. Except for the installation procedure, extra precautions are typically not required. To prevent interference from other equipment during installation, great consideration must be given to the ground & power connection plan. Operators can use normal mode chokes to reduce common electrical noise on installations that do not use the protected cable when installing the Allen Bradley 1336F-BRF150-AA-EN-GMS6-L5.

1336F-BRF150-AA-EN-HAS1

The Allen-Bradley 1336 PLUS II 1336F-BRF150-AA-EN-HAS1 drive can control induction motors with different types of technology and it can operate with different types of input voltage. It can produce high torque levels for advanced applications through SVC (sensorless vector control) technology. The 1336F-BRF150-AA-EN-HAS1 drive has an AC operating voltage range between 380 and 480 Volts AC and a DC operating voltage range between 513 and 620 Volts DC. Its only interface module is an HMI with an analog pot.

1336F-BRF150-AA-EN-HAS1-L6

The Allen-Bradley 1336 PLUS II 1336F-BRF150-AA-EN-HAS1-L6 drive can produce 15 Horsepower or 11 kilowatts of nominal output at 380-480V AC and at 513-620V DC of input voltage. Its human-machine interface module includes an analog potentiometer. The 1336F-BRF150-AA-EN-HAS1-L6 drive can be programmed to operate with both slip compensation and with negative slip compensation. It has several terminal blocks, and one of these blocks hosts its AC-powered control interface.

1336F-BRF150-AA-EN-HAS2-L4

The Allen-Bradley 1336F-BRF150-AA-EN-HAS2-L4 drive is a 1336 PLUS II variable frequency drive which can operate on 513-620 Volts DC or on 380-480 Volts AC of input voltage. The nominal output power ratings of the 1336F-BRF150-AA-EN-HAS2-L4 drive are 11 kilowatts or 15 Horsepower. This drive comes with an HMI with a digital potentiometer and with a control interface with 9 inputs. The 1336F-BRF150-AA-EN-HAS2-L4 drive can support sensorless vector control technology.

1336F-BRF150-AA-EN-HAS2-L5

The Allen-Bradley 1336F-BRF150-AA-EN-HAS2-L5 drive is a 1336 PLUS II series motor control device equipped with sensorless vector control (SVC) technology. The SVC technology can produce and sustain the high torque levels required by large motors and advanced applications. The 1336F-BRF150-AA-EN-HAS2-L5 drive operates at 380-480V AC or 513-620V DC and its control interface module operates at 24V AC or 24V DC. Its HMI supports programming and control functions.

1336F-BRF150-AA-EN-HAS2-L6

The Allen-Bradley 1336F-BRF150-AA-EN-HAS2-L6 drive from the 1336 PLUS II series comes with several motor control technologies, several programmable features, several diagnostics features, several interface modules, and 2 input voltage ranges. Its motor control technologies include SVC and V/Hz technology, its interface module options include a 115V AC control interface and a programmer/controller HMI, and its 2 input voltage ranges are 380-480V AC and 513-620V DC. The 1336F-BRF150-AA-EN-HAS2-L6 drive also has several built-in inputs and outputs that are all analog and flexible.

1336F-BRF150-AA-EN-HASB-L4

The Allen-Bradley 1336F-BRF150-AA-EN-HASB-L4 1336 PLUS II drive has a 5V DC TTL contact control interface, but its only HMI option is a blank plate. This blank plate is non-functional, but it protects the drive's HMI slot from dirt and it should be kept in place at all times unless an HMI is installed on the drive. The 1336F-BRF150-AA-EN-HASB-L4 drive can operate at an AC voltage range between 380 and 480 Volts AC or at a DC voltage range between 513 and 620 Volts DC.

1336F-BRF150-AA-EN-HCS1

The Allen-Bradley 1336 PLUS II 1336F-BRF150-AA-EN-HCS1 drive comes with an advanced HMI which makes this drive easy to program. After the drive has been completely programmed, its HMI can also be used to control and monitor it and to download and upload data into it. The 1336F-BRF150-AA-EN-HCS1 drive's HMI also has an analog potentiometer. Its input ratings are 513-620V DC or 380-480V AC and its nominal output ratings are 15 Hp or 11 kW.

1336F-BRF150-AA-EN-HCS2-L4

The Allen-Bradley 1336F-BRF150-AA-EN-HCS2-L4 drive can operate with 380 to 480 Volts AC or 513 to 620 Volts DC and it is part of the 1336 PLUS II series of motor control drives that support sensorless vector technology and adjustable frequency. There is a control interface on this drive which is a TTL contact interface. The 1336F-BRF150-AA-EN-HCS2-L4 drive also has an HMI which is an advanced programmer/controller HMI with a digital potentiometer and an upload/download function.

1336F-BRF150-AA-EN-L4

The Allen-Bradley 1336 PLUS II 1336F-BRF150-AA-EN-L4 drive has adjustable output frequency and different technologies which it can use for controlling motors. This drive supports 0 to 400 Hertz of adjustable output frequency and its control technologies include Volts/Hertz technology that is suitable for standard motors and sensorless vector control technology that is suitable for more advanced motors. The 1336F-BRF150-AA-EN-L4 drive also has the ability to operate with either 380-480V AC voltage or 513-620V DC voltage.

1336F-BRF150-AA-EN-L5

The Allen-Bradley 1336F-BRF150-AA-EN-L5 drive is a 1336 PLUS II drive that is powered by 513-620V DC or by 380-480V AC and that produces 11 kilowatts or 15 Horsepower of output power. It has a control interface module that is powered by 24V DC or 24V AC. The 1336F-BRF150-AA-EN-L5 drive can support programmable slip compensation and negative slip compensation features. It was designed to operate with the smallest possible amount of internal cables and simplest possible wiring system.

1336F-BRF150-AA-EN-L6

The Allen-Bradley 1336 PLUS II 1336F-BRF150-AA-EN-L6 drive that can be powered by 380-480V AC or 513-620V DC of voltage and that can control motors with Volts/Hertz technology or with sensorless vector technology. The sensorless vector technology allows the compact 1336F-BRF150-AA-EN-L6 drive to control unusually large motors. The 1336F-BRF150-AA-EN-L6 drive has several non-isolated analog I/O and an AC-powered control interface with 9 configurable inputs. This drive's nominal Horsepower rating is 15 Horsepower.

1336F-BRF150-AE-EN

The Allen Bradley 1336F-BRF150-AE-EN is a variable frequency drive from the Bulletin 1336F series that can operate with both AC and DC supply voltage ranges of 380 - 480 V AC and 513 - 620 V DC. It has a nominal power rating of 1.5 horsepower. Aside from that, its enclosure is rated IP20 (NEMA UL Type 1) and has Electromagnetic compatibility (EMC) protection. It comes with English as the default language.

1336F-BRF150-AF-EN-HJ2-LA2

The Allen-Bradley 1336F-BRF150-AF-EN-HJ2-LA2 1336 PLUS II drive is protected from debris, dust, moderate amounts of water, and certain chemicals by its IP65-rated enclosure. It also comes with an HMI that has a digital potentiometer and that can be used for programming and controlling it. The 1336F-BRF150-AF-EN-HJ2-LA2 drive also features an analog interface with 2 analog inputs that it can use in addition to its built-in analog inputs and outputs to connect to other devices.

1336F-BRF150-AN-EN

This drive by Allen Bradley, Model ID 1336F-BRF150-AN-EN, is a three-phase 380-480 Volts AC or 513-620 Volts DC adjustable frequency drive with a 15 HP power rating. This Bulletin-1336F model is considered an open drive meaning it has no protection and is rated IP00. Once configured properly, the 1336F-BRF150-AN-EN can be controlled via integrated I/O by connecting electrical signal generators to the correct connector. An advanced technique can involve using SCANport communication to transmit messages to the drive.

1336F-BRF150-AN-EN-GMS1

The Allen-Bradley 1336F-BRF150-AN-EN-GMS1 drive is one of the 1336 PLUS II drives that is able to operate with DC voltage as well as AC voltage. It is able to operate with either 513-620 Volts DC or with 380-480 Volts AC. The 1336F-BRF150-AN-EN-GMS1 drive's only interface module is a snap-in type of Remote I/O communication module, but it has slots for hosting different types of additional interface modules. The 1336F-BRF150-AN-EN-GMS1 drive's nominal Horsepower output rating is 150 Horsepower.

1336F-BRF150-AN-EN-GMS1-L6

The 1336F-BRF150-AN-EN-GMS1-L6 AC and DC-powered drive is an Allen-Bradley 1336 PLUS II AC and DC-powered drive. Its AC rating is between 380 and 480 Volts AC, and its DC rating is between 513 and 620 Volts DC. The 1336F-BRF150-AN-EN-GMS1-L6 drive features a snap-in Remote I/O communication module and a 115V AC-rated control interface with 9 configurable inputs. The drive also has several flexible analog inputs and outputs that the users can configure or replace with different inputs and outputs on analog interfaces.

1336F-BRF150-AN-EN-HAS1-LA6

The Allen-Bradley 1336F-BRF150-AN-EN-HAS1-LA6 drive is a 380-480V AC and 513-620V DC-rated 1336 PLUS II series drive. It was made to accelerate and decelerate motors in various industrial applications without creating friction. The 1336F-BRF150-AN-EN-HAS1-LA6 drive comes with a snap-in programmer/controller HMI that has an analog potentiometer and with an analog interface that has 2 inputs. The inputs on the analog interface are a thermistor input and a bi-polar input and both inputs are isolated.

1336F-BRF150-AN-EN-HAS2-L4

The Allen-Bradley 1336F-BRF150-AN-EN-HAS2-L4 adjustable frequency drive from the 1336 PLUS II line is able to be integrated with field-oriented control drives from the 1336 IMPACT and 1336 FORCE lines. It comes with a control interface and an HMI as optional accessories, and it can host several other interfaces and other accessories if required. The 1336F-BRF150-AN-EN-HAS2-L4 drive supports voltage ratings of 513 to 620 Volts DC and of 380 to 480 Volts AC.

1336F-BRF150-AN-EN-HAS2-L6

The 1336F-BRF150-AN-EN-HAS2-L6 drive is an Allen-Bradley 1336 PLUS II drive that can operate at 380 to 480V AC or at 513 to 620V DC. It can also generate 112 kW or 150 Hp of nominal output power when it operates. The 1336F-BRF150-AN-EN-HAS2-L6 drive comes with an optional HMI that has a digital potentiometer. The HMI makes it easy for the users to program, control, and monitor the drive.

1336F-BRF150-AN-EN-HCS2-L6

The Allen-Bradley 1336F-BRF150-AN-EN-HCS2-L6 1336 PLUS II drive comes with an HMI and a control interface and the ability to operate with AC or DC input. Through the HMI, the 1336F-BRF150-AN-EN-HCS2-L6 drive's users can program the drive, control the drive, monitor the drive, upload data to the drive, and download data to the drive. The drive's users can also make use of the HMI's digital potentiometer in many applications. The 1336F-BRF150-AN-EN-HCS2-L6 drive's control interface operates at 115V AC and the drive operates at 380-480V AC or at 513-620V DC.

1336F-BRF150-AN-EN-L5

The Allen-Bradley 1336F-BRF150-AN-EN-L5 drive is an AC and DC-powered type of 1336 PLUS II drive. It can be powered by 380 to 480V AC or by 513-620V DC. The 1336F-BRF150-AN-EN-L5 drive also has a control interface module that can be powered by 24V AC or by 24V DC. This drive operates at a nominal Hp rating of 150 Horsepower or 112 kilowatts. The 1336F-BRF150-AN-EN-L5 drive has a sepcial auto-tuning function.

1336F-BRF150-AN-EN-L6

The Allen-Bradley 380-480 Volts AC or 513-620 Volts DC variable frequency drive, Model ID 1336F-BRF150-AN-EN-L6, has a 1.5 horsepower output. This drive has default English language settings and an additional 115 Volts AC card. This is an (IP00) open A1-frame drive with no environmental protection. There are other language versions of the 1336 PLUS II drives, including Spanish, German (DE), French (FR), Italian (IT), and German (FR) (ES). The 1336F-BRF150-AN-EN-L6 drive has electrical specs that include a maximum short circuit current rating of 200,00 Amperes RMS symmetrical at 600 Volts and an efficiency rating of 97.5% at rated Amperes nominal line voltage.

1336F-BRF15-AA-EN

The Allen-Bradley 1336F-BRF15-AA-EN drive is a 1336 PLUS II series VFD or variable frequency drive. It is known as a variable frequency drive because its output frequency is adjustable and its output frequency can be used along with other types of control technology to control the speed at which an industrial motor operates. The 1336F-BRF15-AA-EN drive has no interface modules. It generates 1.5 Horsepower of nominal output at 380-480V AC or 513-620V DC.

1336F-BRF15-AA-EN-GMS6-L4

The Allen-Bradley 1336 PLUS II 1336F-BRF15-AA-EN-GMS6-L4 drive comes with a TTL contact control interface and a snap-in Enhanced Devicenet communication module. The drive's TTL contact control interface is rated for 5V DC voltage, and the drive itself is rated for 380-480V AC or for 513-620V DC voltage. The 1336F-BRF15-AA-EN-GMS6-L4 drive's nominal output ratings are 1.2 kilowatts or 1.5 Horsepower. This drive can operate with SVC or sensorless vector control technology in advanced motor control applications.

1336F-BRF15-AA-EN-HAS1-L6

The Allen-Bradley 1336 PLUS II 1336F-BRF15-AA-EN-HAS1-L6 drive comes with an AC-powered control interface and with an HMI that has an analog potentiometer. Its control interface is rated at 115V AC and this interface has 9 inputs which are all user-configurable. The 1336F-BRF15-AA-EN-HAS1-L6 drive's HMI is a programmer and controller device. The AC voltage rating of the 1336F-BRF15-AA-EN-HAS1-L6 drive is 380-480V AC and the DC voltage rating of the drive is 513-620V DC.

1336F-BRF15-AA-EN-HAS2

The Allen-Bradley 1336 PLUS II 1336F-BRF15-AA-EN-HAS2 motor control drive is a drive which is suitable for a wide range of motor control applications. It can handle many types of standard applications with its Volts/Hertz technology option, and it can handle several more advanced applications with its SVC technology option. The 1336F-BRF15-AA-EN-HAS2 drive can also operate with 2 different voltage ranges: 380-480V AC or 513-620V DC. This drive comes with a programmer/controller HMI.

1336F-BRF15-AA-EN-HAS2-LA5-L6

The Allen-Bradley 1336F-BRF15-AA-EN-HAS2-LA5-L6 drive is a 1336 PLUS II drive with an output frequency range of 0 to 400 Hertz. The drive can control motors with its output frequency. The 1336F-BRF15-AA-EN-HAS2-LA5-L6 drive has an analog interface with a configurable output, a pulse output, and a pulse input. It also has a human-machine interface with a digital potentiometer. The 1336F-BRF15-AA-EN-HAS2-LA5-L6 drive produces 1.5 Horsepower of nominal output and it operates at 513-620V DC or 380-480V AC.
Previous 1

...

20

21

22

...

27 Next

Displaying 50 of 1331 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP