GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Drives |
Product Type: | Drive |
Part Number: | 20AD065A0AYNANC0 |
Series: | PowerFlex 70 |
Description:
The Allen-Bradley 20AD065A0AYNAC0 AC adjustable frequency drive is included in the PowerFlex 70 series. It features an Insulated-Gate Bipolar Transistor (IGBT) and has an E frame size. The drive has a three-phase power input with an input voltage of 480 Volts AC at 50 Hertz. The drive is rated for a power output of up to 37 Kilowatts (50 horsepower) and an output current of 65 Amperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 20AD065A0AYNANC0 PowerFlex 70 adjustable frequency AC drive controls both speed and torque of three-phase induction motors in industrial applications. This Allen-Bradley PowerFlex 70 adjustable frequency AC drive includes an internal dynamic IGBT brake that saves efficiently switching regenerative energy without adding external chopper circuits. The Allen-Bradley 20AD065A0AYNANC0 can be mounted with an input circuit breaker or fuses. This Allen-Bradley adjustable frequency AC drive produces torque efficiently and offers tight torque regulation with rapid update times of torque inputs. The Allen-Bradley 20AD065A0AYNANC0 AC drive supports shielded/armored and unshielded cables for wiring and installation. The Allen-Bradley 20AD065A0AYNANC0 provides removable MOV and capacitors to ground, electronic motor overload protection and 6 kV transient protection to increase motor life. The Allen-Bradley 20AD065A0AYNANC0 provides an efficient integral electromagnetic compatibility (EMC) filtering to meet EMC needs.
This Allen-Bradley 20AD065A0AYNANC0 PowerFlex 70 adjustable frequency AC drive supports an input voltage rating of 480 volts AC and current consumption of 65 amperes with a maximum power rating of 50 horsepower and 37 kilowatts. This Allen-Bradley 20AD065A0AYNANC0 can be configured with FORCE technology as volts per hertz, vector or sensorless vector control. The 20AD065A0AYNANC0 AC drive is constructed to meet the NEMA/UL Type 1 and IP 20 enclosure ratings. The Allen-Bradley 20AD065A0AYNANC0 should be installed vertically and must make full contact with panels or enclosure. This adjustable frequency AC drive can operate at a temperature range of 0 degrees to 40 degrees Celsius (32 degrees to 104 degrees Fahrenheit) for industrial indoor applications from fans to extruders and weighs approximately 18.60 kilograms (41 pounds) while shipping.
This is the 20AD065A0AYNAC0 AC drive by Allen-Bradley. This adjustable frequency drive is included in the PowerFlex 70 series of industrial drives. It features an Insulated-Gate Bipolar Transistor (IGBT) instead of an internal brake resistor. The drive has a three-phase power input with an input voltage of 480 Volts AC at 50 Hertz. The drive is rated for a power output of up to 37 Kilowatts (50 horsepower) and an output current of 65 Amperes. This drive is panel mounted and has dimensions compatible with Frame type E. It has a protected enclosure that is rated IP 20 NEMA/UL Type 1. The enclosure features a conformal coating and includes a second environmental filter that complies with CE EMC (89/336/EEC) standards. This unit does not include a feedback module or a communication module. The 20AD065A0AYNAC0 is an enhanced control model and does not include a safe-off option. This unit is rated for an operating temperature range of 0 degrees to 50 degrees Celsius (32 to 122 degrees Fahrenheit) and a non-operational temperature range of -40 degrees to 70 degrees Celsius (-40 to 158 degrees Fahrenheit). The 20AD065A0AYNAC0 drive is able to operate at up to 1000 meters without needing to be de-rated. This unit is built to withstand shock loads of up to 15 G and vibrations with peaks of up to 1 G. This PowerFlex series drive has a weight of approximately 18.6 kilograms (41 pounds) when the standard I/O and Human-Machine Interface modules are included. The measurements of this drive are 280.3 x 555.8 x 207.1 millimeters (11.04 x 21.88 x 8.15 inches).
Manufacturer | Allen Bradley/Rockwell Automation |
Series | PowerFlex 70 Adjustable Frequency AC Drives |
Voltage | 480V AC |
Ph. | 3 |
Amps | 65 |
kW | 37 |
HP | 50 |
Frame | E |
Enclosure | Panel Mount - IP 20, NEMA/UL Type 1 |
Interface Module | Blank Cover |
Type | Manual |
w/Brake IGBT | Yes |
w/Resistor | No |
Rating | Filtered A & B Frames (Optional) C, D, & E Frames (Standard) |
Network Type | None |
Control | Enhanced |
Safe-Off | No |
Feedback | No Feedback - Enhanced Control |
Question: Does Automation Stop offer repairs on the 20AD065A0AYNANC0?
Answer: Yes. We offer repairs for the 20AD065A0AYNANC0 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Drives and 20AD065A0AYNANC0?
Answer: If you buy the 20AD065A0AYNANC0 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 20AD065A0AYNANC0 online?
Answer: Yes. Automation Stop sells the 20AD065A0AYNANC0 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 20AD065A0AYNANC0?
Answer: The 20AD065A0AYNANC0 is made by Allen Bradley - Drives.
Question: What type of product is the 20AD065A0AYNANC0?
Answer: The 20AD065A0AYNANC0 is part of the PowerFlex 70 series.
Question: What is the amperes of the 20AD065A0AYNANC0?
Answer: The amperes of the 20AD065A0AYNANC0 is 65.
Question: What Control does the 20AD065A0AYNANC0 have?
Answer: The 20AD065A0AYNANC0 has a Enhanced Control.
Question: What Enclosure does the Allen Bradley-Rockwell Automation 20AD065A0AYNANC0 have?
Answer: The 20AD065A0AYNANC0 has a Enclosure of panel Mount - IP 20, NEMA/UL Type 1.
Question: Does the Allen Bradley/Rockwell Automation 20AD065A0AYNANC0 have a Feedback?
Answer: No Feedback - Enhanced Control.
Question: What Frame is included with the Allen Bradley Automation 20AD065A0AYNANC0?
Answer: The Allen Bradley Automation 20AD065A0AYNANC0 has a E Frame.
Question: What is the HP of the Allen Bradley Automation 20AD065A0AYNANC0?
Answer: The 20AD065A0AYNANC0 has a HP of 50.
Question: What Interface Module is included with the 20AD065A0AYNANC0?
Answer: The Allen Bradley 20AD065A0AYNANC0 has a Blank Cover Interface Module.
Question: What is the kW of the 20AD065A0AYNANC0?
Answer: The Allen-Bradley 20AD065A0AYNANC0 has a kW of 37.
Question: Does the 20AD065A0AYNANC0 have a Network Type?
Answer: None.
Question: What is the Ph. of the 20AD065A0AYNANC0?
Answer: The Ph. of the 20AD065A0AYNANC0 is 3.
Question: What Rating is included with the 20AD065A0AYNANC0?
Answer: The 20AD065A0AYNANC0 has a Filtered A & B Frames (Optional) C, D, & E Frames (Standard) Rating.
Question: What is the Voltage of the 20AD065A0AYNANC0?
Answer: The Voltage of the Rockwell Automation 20AD065A0AYNANC0 is 480 volts alternating current (AC).
For additional information about 20AD065A0AYNANC0 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20AD065A0AYNANC0.
Revision Part # | Also Known As | Availability |
---|---|---|
20AD065A0AYNANC0/A | 20AD065A0AYNANC0 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.