GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

20DD040A3EYNANDNL

Manufacturer: Allen Bradley - Drives
Product Type: Drive
Part Number: 20DD040A3EYNANDNL
Series: PowerFlex 700S

Description:

Part number 20DD040A3EYNANDNL, which was manufactured by Allen-Bradley, has a voltage of 480 (four hundred and eighty) volts alternating current, or AC. At 480 volts input, this product produces 40 amperes, or 30 horsepower. There is a fully numeric keypad, as well as an LCD (liquid crystal display) display that acts as the primary operator interface. This device has a brake IGBT included. Additionally, this device has a standard incremental encoder to provide feedback to its user.


Key Features:

  • has adjustable bus undervoltage trip
  • comes with a heat sink thermistor that is monitored by microprocessor overtemp trip
  • utilizes a full numeric lcd human interface
  • comes with a logic control ride thru of 0.25 seconds with the drive not running
  • comes with a power ride thru of 15 milliseconds at full load
  • equipped with CE filter
  • equipped with CM choke
  • has horsepower of 30
  • comes with resistor: no

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 20DD040A3EYNANDNL is a PowerFlex 700S AC drive. These AC drives are adjustable frequency AC drives and are manufactured by the Allen-Bradley company. This product has a voltage of four hundred and eighty (480) volts AC, or alternating current. There are three (3) phases associated with the voltage rating for this device. Within each phase are six (6) pulses. Also, when at 480 volts input, this Allen-Bradley product produces thirty (30) horsepower (Hp), or forty (40) amperes. A keypad that is fully numeric is this product's primary interface used for interaction. Additionally, with this operator interface, there is a liquid crystal display, or LCD. There is a brake IGBT equipped with this device. However, there is no brake resistor on this device. To deal with and reduce emissions, this device is has a CM Choke, as well as a CE Filter. To provide feedback to the user, the Allen-Bradley 20DD040A3EYNANDNL has a standard incremental encoder. The enclosure of this device is an IP20, NEMA Type 1 that also has a conformal coating.

This PowerFlex 700S adjustable frequency AC drive also has many other things that benefit it. This device has a position loop integrated into the system. This position loop can be used to perform various tasks and applications. Some applications include electronic line shaft and even simple indexing. The Allen-Bradley 20DD040A3EYNANDNL, as well as all the PowerFlex family, are designed using components that have proven to reduce the noise coming from the machine. Additionally, control terminal blocks can be pulled apart for easy wiring and quick disconnects.

Technical Specifications

Manufacturer Allen Bradley/Rockwell Automation
Series PowerFlex 700S Drives with Phase II Control
Voltage 480V AC
Ph 3
Precharge -
Amps 40
Hp 30
Frame 3
Enclosure IP20, NEMA Type 1 with Conformal Coat
Operator Interface Full Numeric LCD
Documentation English Manual
w/Brake IGBT Yes
w/Resistor No
CE Filter Yes
CM Choke Yes
du/dt Filter No
Version None
Logix Expansion Yes
SynchLink Yes
Cassette Expanded
Feedback Option Standard (Incremental Encoder)
Additional Configuration Phase II DriveLogix 5730 w/EtherNet/IP
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 20DD040A3EYNANDNL?

Answer: Yes. We offer repairs for the 20DD040A3EYNANDNL and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Drives and 20DD040A3EYNANDNL?

Answer: If you buy the 20DD040A3EYNANDNL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 20DD040A3EYNANDNL online?

Answer: Yes. Automation Stop sells the 20DD040A3EYNANDNL online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 20DD040A3EYNANDNL?

Answer: The 20DD040A3EYNANDNL is made by Allen Bradley - Drives.


Question: What type of product is the 20DD040A3EYNANDNL?

Answer: The 20DD040A3EYNANDNL is part of the PowerFlex 700S series.


Question: What is the Additional Configuration of the 20DD040A3EYNANDNL?

Answer: The Additional Configuration of the 20DD040A3EYNANDNL is Phase II DriveLogix 5730 w/EtherNet/IP.


Question: What is the amperes of the 20DD040A3EYNANDNL?

Answer: The amperes of the 20DD040A3EYNANDNL is 40.


Question: What Cassette does the Rockwell-Automation 20DD040A3EYNANDNL have?

Answer: The 20DD040A3EYNANDNL has a Expanded Cassette.


Question: Does the Allen Bradley 20DD040A3EYNANDNL have a CE Filter?

Answer: Yes.


Question: Does the 20DD040A3EYNANDNL have a CM Choke?

Answer: Yes.


Question: What Documentation does the Allen Bradley 20DD040A3EYNANDNL have?

Answer: The Allen Bradley 20DD040A3EYNANDNL has a English Manual Documentation.


Question: Does the 20DD040A3EYNANDNL have a du/dt Filter?

Answer: No.


Question: What is the Enclosure of the 20DD040A3EYNANDNL?

Answer: The Enclosure of the 20DD040A3EYNANDNL is IP20, NEMA Type 1 with Conformal Coat.


Question: What Feedback Option does the 20DD040A3EYNANDNL have?

Answer: The 20DD040A3EYNANDNL has a Standard (Incremental Encoder) Feedback Option.


Question: What is the Frame of the 20DD040A3EYNANDNL?

Answer: The Rockwell Automation 20DD040A3EYNANDNL has a Frame of 3.


Question: What Hp does the 20DD040A3EYNANDNL have?

Answer: The Allen Bradley Automation 20DD040A3EYNANDNL has a Hp of 30.


Question: Does the 20DD040A3EYNANDNL have a Logix Expansion?

Answer: Yes.


Question: What operator interface component is included with the 20DD040A3EYNANDNL?

Answer: The 20DD040A3EYNANDNL has a Full Numeric LCD operator interface component.


Question: What is the Ph of the 20DD040A3EYNANDNL?

Answer: The Ph of the 20DD040A3EYNANDNL is 3.


Question: What Precharge does the 20DD040A3EYNANDNL have?

Answer: The 20DD040A3EYNANDNL has a - Precharge.


Question: Does the Allen Bradley/Rockwell Automation 20DD040A3EYNANDNL have a SynchLink?

Answer: Yes.


Question: Does the Allen Bradley Automation 20DD040A3EYNANDNL have a Version?

Answer: None.


Question: What Voltage does the Allen Bradley Automation 20DD040A3EYNANDNL have?

Answer: The Voltage of the Allen Bradley Automation 20DD040A3EYNANDNL is 480 volts AC (alternating current).


Series information for 20DD040A3EYNANDNL

For additional information about 20DD040A3EYNANDNL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 20DD040A3EYNANDNL.

Revision Part # Also Known As Availability
20DD040A3EYNANDNL/A 20DD040A3EYNANDNL Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 20DD04OA3EYNANDNL
  • 20DDO40A3EYNANDNL
  • 20DDO4OA3EYNANDNL
  • 2ODD040A3EYNANDNL
  • 2ODD04OA3EYNANDNL
  • 2ODDO40A3EYNANDNL
  • 2ODDO4OA3EYNANDNL

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP