GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2711P-T6C3D

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-T6C3D
Series: PV Plus 600

Description:

The Allen-Bradley 2711P-T6C3D is a PanelView Plus 600 operator terminal. For power, the terminal requires an external power supply of 18-32 volts, direct current, with a nominal power supply of 24 volts. It comes equipped with an internal memory of 64 MBfFlash memory and 64 MB of non-volatile memory. The terminal comes with one Ethernet port, one RS232 port, and one USB port. This terminal also supports DH-485 communication.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen Bradley 2711P-T6C3D has a 5.5-inch color-active matrix thin-film resistor (TFT) display. This touch-operated HMI comes with several embedded interfaces. The primary three interfaces are one RS-232 port, one DH-485, and one Ethernet communication interface. The Allen-Bradley 2711P-T6C3D is mostly used to control and monitor machines in factories. The built-in 5.5-inch color active matrix TFT display shows the machine’s status with utmost accuracy. The TFT display comes with an antiglare and resistive coating to protect the module from possible environmental contaminants. This PanelView Plusscreen has an effective viewing area of 4.37 x 3.3 inches and a resolution of 320 x 240 pixels. The Allen-Bradley 2711P-T6C3D can withstand a 110 G shock. The touch screen on this operator terminal is an analog resistive touch screen that has an actuation rating of one million presses with an operating force of 10-110 g. The display on this color terminal is lit by a cold-cathode fluorescent (CCFL) backlight that has a 50,000-hour life. The backlight produces a screen brightness of 300 cd/m² (Nits). When it comes to memory, the Allen-Bradley 2711P-T6C3D comes with an internal storage memory of 64 GB. Furthermore, it also packs 64 GB of volatile temporary storage for applications. There is an NEC VR5532A MIP CPU chip inside this color terminal with a processing speed of 350 MHZ. For direct connection, the Allen Bradley 2711P-T6C3D comes with one 1.1 USB port. This operator terminal requires an input voltage of 18 to 32 volts DC with a nominal voltage of 24 VDC.

Technical Specifications

MPN 2711P-T6C3D
Manufacturer Allen Bradley / Rockwell Automation
Series Panelview Plus 600
Input Type Touch
Display Type Color
Display Size 5.5 in
Resolution 320 x 240
Power DC
PCI Max 11 W
Battery Life 5 years min. at 25 °C (77 °F)
Clock Battery-backed, +/-2 minutes per month
Operating Temperature 0...55 °C (32...131 °F)
Heat Dissipation 85 BTU/hr
Backlight CCFL 50,000 hours life, min.
External CompactFlash Storage 512 MB max
Input Voltage -
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 2711P-T6C3D?

Answer: Yes. We offer repairs for the 2711P-T6C3D and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T6C3D?

Answer: If you buy the 2711P-T6C3D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-T6C3D online?

Answer: Yes. Automation Stop sells the 2711P-T6C3D online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-T6C3D?

Answer: The 2711P-T6C3D is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-T6C3D?

Answer: The 2711P-T6C3D is part of the PV Plus 600 series.


Question: What Backlight does the Allen-Bradley 2711P-T6C3D have?

Answer: The Backlight of the 2711P-T6C3D is CCFL 50,000 hours life, min..


Question: What Battery Life does the Allen Bradley/Rockwell Automation 2711P-T6C3D have?

Answer: The Allen Bradley/Rockwell Automation 2711P-T6C3D has a Battery Life of 5 years min. at 25 °C (77 °F).


Question: What is the Clock of the 2711P-T6C3D?

Answer: The 2711P-T6C3D has a Clock of Battery-backed, +/-2 minutes per month.


Question: What is the Display Size of the Rockwell-Automation 2711P-T6C3D?

Answer: The Rockwell-Automation 2711P-T6C3D has a Display Size of 5.5 in.


Question: What Display Type does the Rockwell Automation 2711P-T6C3D have?

Answer: The 2711P-T6C3D has a color-supporting Display Type.


Question: What External CompactFlash Storage does the 2711P-T6C3D have?

Answer: The 2711P-T6C3D has a External CompactFlash Storage of 512 MB max.


Question: What Heat Dissipation does the Allen Bradley-Rockwell Automation 2711P-T6C3D have?

Answer: The Heat Dissipation of the Allen Bradley-Rockwell Automation 2711P-T6C3D is 85 BTU/hr.


Question: What Input Type is included with the Rockwell-Automation 2711P-T6C3D?

Answer: The Rockwell-Automation 2711P-T6C3D has a Touch Input Type.


Question: What Input Voltage is included with the Rockwell Automation 2711P-T6C3D?

Answer: The 2711P-T6C3D has a - Input Voltage.


Question: What is the Operating Temperature of the 2711P-T6C3D?

Answer: The Operating Temperature of the 2711P-T6C3D is 0...55 °C (32...131 °F).


Question: What PCI Max does the Allen Bradley Automation 2711P-T6C3D have?

Answer: The PCI Max of the 2711P-T6C3D is 11 W.


Question: What Power is included with the 2711P-T6C3D?

Answer: The 2711P-T6C3D has a DC (direct current) Power.


Question: What is the Resolution of the 2711P-T6C3D?

Answer: The Resolution of the Rockwell-Automation 2711P-T6C3D is 320 x 240.


Series information for 2711P-T6C3D

For additional information about 2711P-T6C3D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T6C3D.

Revision Part # Also Known As Availability
2711P-T6C3D/A 2711P-T6C3D Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 2711P-TGC3D
  • 271IP-T6C3D
  • 271IP-TGC3D
  • 27I1P-T6C3D
  • 27I1P-TGC3D
  • 27IIP-T6C3D
  • 27IIP-TGC3D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP