GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A320H-HK22AA |
Series: | MPL Servo Motors |
Description:
This MPL-A320H-HK22AA by Rockwell Automation has a maximum speed 3500 RPM servo motor with low inertia of 0.000078 kg m˛ and a part of voltage class 200 V AC. This product has a 50.8 mm magnetic stack, circular bayonet connector, and no brakes. It operates at a rated power of 1.0 kW, continuous stall torque of 3.05 Nm, a peak stall torque of 7.91 Nm, and a 100 mm frame size.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-A320H-HK22AA is a servo motor that is a member of the low-inertia MP series by Allen-Bradley. This servo motor comes with a shaft seal that helps reduce the amount of moisture that enters the product. In addition to the seal, the shaft is also keyed. This product has all the standard factory settings and options. The servo motor is of IEC metric Frame 3/Frame 100, which is 100 mm frame size. This motor has free mounting M7 type holes and a circular bayonet connector facing the shaft. As mentioned above, this product comes from a low inertia motor series, so it has an inertia of 0.000078 kg m², while a continuous stall torque of 3.05 Nm and a peak stall torque of 7.91 Nm can be observed. Speed is one of the most important specifications of a servo motor, and the MPL-A320H-HK22AA has a rated speed of 3350 rpm and a maximum speed of 3500 rpm. The MPL-A320H-HK22AA has an incremental encoder as a feedback system. The encoder speed is 2000 lines per revolution, and it is mainly used in industrial and heavy-duty applications due to its excellent speed and distance feedback. Some other specifications include a rated output power of 1 KW and a weight of approximately 3.7 kg (8.0 lbs). The MPL-A320H-HK22AA is rated for IP50 and IP66 type enclosures, which means that it is dustproof. Even with these ratings, precautionary measures should be taken as the shaft seal can wear off. This servo motor also comes with no brake installed.
MPN | MPL-A320H-HK22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 100 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 3500 rpm |
Feeback | 2000 line encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A320H-HK22AA?
Answer: Yes. We offer repairs for the MPL-A320H-HK22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A320H-HK22AA?
Answer: If you buy the MPL-A320H-HK22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A320H-HK22AA online?
Answer: Yes. Automation Stop sells the MPL-A320H-HK22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A320H-HK22AA?
Answer: The MPL-A320H-HK22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A320H-HK22AA?
Answer: The MPL-A320H-HK22AA is part of the MPL Servo Motors series.
Question: Does the Allen-Bradley MPL-A320H-HK22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the Allen-Bradley MPL-A320H-HK22AA?
Answer: The MPL-A320H-HK22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Allen Bradley-Rockwell Automation MPL-A320H-HK22AA have?
Answer: The MPL-A320H-HK22AA includes Standard for its Factory Designated Options.
Question: What Feeback does the Allen Bradley Automation MPL-A320H-HK22AA have?
Answer: The Allen Bradley Automation MPL-A320H-HK22AA has a Feeback of 2000 line encoder.
Question: What is the Frame Size of the MPL-A320H-HK22AA?
Answer: The Frame Size of the MPL-A320H-HK22AA is 100 mm.
Question: What is the Magnetic Stack Length of the MPL-A320H-HK22AA?
Answer: The Magnetic Stack Length of the Allen-Bradley MPL-A320H-HK22AA is 2 in.
Question: What Mounting Flange is included with the MPL-A320H-HK22AA?
Answer: The Allen Bradley/Rockwell Automation MPL-A320H-HK22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-A320H-HK22AA have?
Answer: The Rated Speed of the MPL-A320H-HK22AA is 3500 revolutions per minute (RPM).
Question: Does the Rockwell-Automation MPL-A320H-HK22AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
Question: What Voltage Class does the MPL-A320H-HK22AA have?
Answer: The Rockwell-Automation MPL-A320H-HK22AA has a Voltage Class of 200V.
For additional information about MPL-A320H-HK22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A320H-HK22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A320H-HK22AA/A | MPL-A320H-HK22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.