GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A330P-MJ72AA |
Series: | MPL Servo Motors |
Description:
The Allen Bradley MPL-A330P-MJ72AA comes with 0.00012 kg m˛ inertia and a 76.2 mm magnetic stack for the rigidity of the stator. The motor has a rated power of 1.8 kW (output) but there are no brakes in it. A continuous torque of 4.18 Nm at the stall and a maximum torque of 11.1 Nm can be observed in a small time. For the feedback system, there is an absolute multi-turn 1024 sin/cos encoder with Hiperface protocol.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
A maximum speed of 5000 RPM with a very low inertia of 0.00012 kg m², Allen Bradley MPL-A330P-MJ72AA comes from the brushless alternating current 200 Volts class servo motor series. This motor follows the standard IEC metric with this the frame size is determined to be 100 mm of a Frame Size 3 / Framed Size 100. This compact servo motor weighs about 4.6 kg or 10.1 lbs. For the outer connections, a SpeedTech DIN connector is used. This is a cost-efficient and secure way of connecting. This connector also has a 90-degree bend at the cable and a 180-degree rotation possibility. To secure the motor, even more, there are free mounting holes with m7 motor end-type connectors. For the internal components, there is a shaft key that locks the operations from the internal vibrations of the motor. These internal connections are IP50 and IP66 rated. This rating indicates that the servo motor is dust-resistant. It should still be kept in a well-ventilated, dry environment as there is no shaft seal to prevent the moisture from coming inside. The motor is of the factory standard with a maximum torque of 11.1 Nm in a short duration and a continuous torque of 4.18 Nm at the stall. The rated output power comes out to be 1.8 kW with a 76.2 mm magnetic stack for the rigidity of the stator. This servomotor also runs on an absolute 1024 multi-tun sin/cos encoder and a Hiperface protocol. This protocol minimizes the number of cables going to be used inside the motor.
MPN | MPL-A330P-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 100 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 5000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A330P-MJ72AA?
Answer: Yes. We offer repairs for the MPL-A330P-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A330P-MJ72AA?
Answer: If you buy the MPL-A330P-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A330P-MJ72AA online?
Answer: Yes. Automation Stop sells the MPL-A330P-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A330P-MJ72AA?
Answer: The MPL-A330P-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A330P-MJ72AA?
Answer: The MPL-A330P-MJ72AA is part of the MPL Servo Motors series.
Question: Does the MPL-A330P-MJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the MPL-A330P-MJ72AA?
Answer: The Allen Bradley Automation MPL-A330P-MJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the MPL-A330P-MJ72AA have?
Answer: The Allen Bradley Automation MPL-A330P-MJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-A330P-MJ72AA have?
Answer: The MPL-A330P-MJ72AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-A330P-MJ72AA?
Answer: The MPL-A330P-MJ72AA has a Frame Size of 100 mm.
Question: What is the Magnetic Stack Length of the MPL-A330P-MJ72AA?
Answer: The Magnetic Stack Length of the Allen-Bradley MPL-A330P-MJ72AA is 3 in .
Question: What Mounting Flange is included with the MPL-A330P-MJ72AA?
Answer: The MPL-A330P-MJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A330P-MJ72AA?
Answer: The Rated Speed of the MPL-A330P-MJ72AA is 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Rockwell Automation MPL-A330P-MJ72AA?
Answer: The MPL-A330P-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Allen Bradley MPL-A330P-MJ72AA?
Answer: The Allen Bradley MPL-A330P-MJ72AA has a Voltage Class of 200V.
For additional information about MPL-A330P-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A330P-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A330P-MJ72AA/A | MPL-A330P-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.