GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A430P-MJ72AA

✓ In Stock

MPL-A430P-MJ72AA Image 1 thumbnail
MPL-A430P-MJ72AA Image 2 thumbnail
MPL-A430P-MJ72AA Image 3 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A430P-MJ72AA
Series: MPL Servo Motors

Description:

The Allen-Bradley MPL-A430P-MJ72AA is a Low-Inertia Servo Motor that offers an efficient solution to reduce the motor size and deliver a high continuous motor power of 2.2 Kilowatts. This servomotor offers a high-speed rate of 5000 revolutions per minute at 200 Volts AC with a frame size of 115 millimeters (4.52 inches). This motor controller operates at a temperature range between zero (0) and 40 degrees Celsius (32 to 104 degrees Fahrenheit) for industrial applications and weighs approximately 4.54 Kilograms (10 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley MPL-A430P-MJ72AA is a Low-Inertia Servo Motor that offers an efficient solution to reduce the motor size and deliver a high continuous motor power of 2.2 Kilowatts. The controller has a magnet stack length of 76.2 millimeters (3.0 inches). This servomotor offers a high-speed rate of 5000 revolutions per minute at 200 Volts AC with a frame size of 115 millimeters (4.52 inches). This MPL-A430P-MJ72AA AC servo motor controller supports Kinetix 6000, 6200, 6500, 300, and Kinetix 350 servo drive series for high-performance motion control systems. The servomotor offers an enhanced winding insulation material to improve heat transfer and thermal management. The MPL-A430P-MJ72AA produces torque efficiently over a large speed range and includes very high energy rare-earth Allen-Bradley magnets to rapidly accelerate the motor.

The MPL-A430P-MJ72AA includes high-resolution encoders that can be employed as a part of the Kinetix safe-off feature. This device communicates with the motor using a protocol that considers the servo as a master and the motor as a slave device. The controller has a small package without any electrical brake. The MPL-A430P-MJ72AA servo motor has a right angle DIN circular 180 degrees rotatable bayonet connector that employes a single cable and permits the flexible orientation of connectors. This servomotor offers field-reversible motor connectors. The MPL-A430P-MJ72AA is designed to meet IP66 enclosure environmental rating and standard IEC 72-1 installing dimensions. The device can operate at a temperature range of zero (0) to 40 degrees Celsius (32 to 104 degrees Fahrenheit) for industrial applications and weighs approximately 4.54 Kilograms (10 pounds) while shipping.

Technical Specifications

MPN MPL-A430P-MJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Voltage Class 200V
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Brand Allen-Bradley / Rockwell Automation
Series MP
Part Number MPL-A430P-MJ72AA
Description Low-Inertia Servo Motor
Voltage Rating 200 Volts
Number of Phases 3
Frame Size 115 millimeters
Rated Speed 5000 RPM
Magnetic Stack Length 76.2 millimeters (3.0 inches)
Feedback Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol)
Enclosure/Shaft Key/Shaft Seal Shaft key/No shaft seal
Brake No Brake
Connectors Circular (SpeedTec) DIN connector, right angle, 180° rotatable
Mounting Flange IEC Metric
Factory Designated Options Standard
Motor Rated Output 2.2 Kilowatts
Continuous Stall Torque Nm (lb-in.) 5.99 (53)
Operating Temperature Range 0 to +40 °C (32 to 104 °F)
Weight 4.54 Kilograms (10 Pounds)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the MPL-A430P-MJ72AA?

Answer: Yes. We offer repairs for the MPL-A430P-MJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430P-MJ72AA?

Answer: If you buy the MPL-A430P-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A430P-MJ72AA online?

Answer: Yes. Automation Stop sells the MPL-A430P-MJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA is part of the MPL Servo Motors series.


Question: Does the Rockwell-Automation MPL-A430P-MJ72AA have a Brake?

Answer: No Brake.


Question: What Brand is included with the Rockwell-Automation MPL-A430P-MJ72AA?

Answer: The Rockwell-Automation MPL-A430P-MJ72AA has a AB / Rockwell Automation Brand.


Question: What is the Connectors of the MPL-A430P-MJ72AA?

Answer: The Connectors of the Allen Bradley Automation MPL-A430P-MJ72AA is Circular (SpeedTec) DIN connector, right angle, 180° rotatable.


Question: What is the Continuous Stall Torque Nm (lb-in.) of the Allen Bradley-Rockwell Automation MPL-A430P-MJ72AA?

Answer: The Allen Bradley-Rockwell Automation MPL-A430P-MJ72AA has a Continuous Stall Torque Nm (lb-in.) of 5.99 (53).


Question: What Description is included with the Allen-Bradley MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA has a Low-Inertia Servo Motor Description.


Question: Does the MPL-A430P-MJ72AA have a Enclosure/Shaft Key/Shaft Seal?

Answer: Shaft key/No shaft seal.


Question: What kind of Factory Designated Options does the MPL-A430P-MJ72AA have?

Answer: The Allen Bradley/Rockwell Automation MPL-A430P-MJ72AA includes Standard for its Factory Designated Options.


Question: What Feeback does the MPL-A430P-MJ72AA have?

Answer: The Allen Bradley-Rockwell Automation MPL-A430P-MJ72AA has a Multi-turn high-resolution encoder Feeback.


Question: What Feedback does the MPL-A430P-MJ72AA have?

Answer: The Allen-Bradley MPL-A430P-MJ72AA has a Feedback of Multi-turn, 1024 sin/cos, absolute encoder (Hiperface protocol).


Question: What is the Frame Size of the Allen Bradley/Rockwell Automation MPL-A430P-MJ72AA?

Answer: The Frame Size of the Allen Bradley/Rockwell Automation MPL-A430P-MJ72AA is 115 millimeters.


Question: What is the Magnetic Stack Length of the MPL-A430P-MJ72AA?

Answer: The Magnetic Stack Length of the MPL-A430P-MJ72AA is 76.2 millimeters (3.0 inch).


Question: What Motor Rated Output does the Allen Bradley-Rockwell Automation MPL-A430P-MJ72AA have?

Answer: The Motor Rated Output of the Allen Bradley-Rockwell Automation MPL-A430P-MJ72AA is 2.2 Kilowatts.


Question: What Mounting Flange is included with the Allen Bradley MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA has a IEC Metric Mounting Flange.


Question: What is the Number of Phases of the MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA has a Number of Phases of 3.


Question: What is the Operating Temperature Range of the MPL-A430P-MJ72AA?

Answer: The Rockwell-Automation MPL-A430P-MJ72AA has a Operating Temperature Range of 0 to +40 °C (32 to 104 °F) .


Question: What unit Number does the MPL-A430P-MJ72AA have?

Answer: The Allen-Bradley MPL-A430P-MJ72AA has a unit Number of MPL-A430P-MJ72AA.


Question: What is the Rated Speed of the Allen Bradley Automation MPL-A430P-MJ72AA?

Answer: The Rated Speed of the MPL-A430P-MJ72AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the MPL-A430P-MJ72AA have?

Answer: The MPL-A430P-MJ72AA has a Voltage Class of 200V.


Question: What is the Voltage Rating of the MPL-A430P-MJ72AA?

Answer: The Allen Bradley MPL-A430P-MJ72AA has a Voltage Rating of 200 Volts.


Question: What is the Weight of the MPL-A430P-MJ72AA?

Answer: The MPL-A430P-MJ72AA has a Weight of 4.54 Kilograms (10 Pounds).


Series information for MPL-A430P-MJ72AA

For additional information about MPL-A430P-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430P-MJ72AA.

Revision Part # Also Known As Availability
MPL-A430P-MJ72AA/A MPL-A430P-MJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A43OP-MJ72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP