GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A4540F-SJ22AA |
Series: | MPL Servo Motors |
Description:
MPL-A4540F-SJ22AA by Allen Bradley is a servo motor with a low-inertia of 0.00052 kg m˛ and a rated 30000 RPM speed. This motor belongs to the 200 V AC series with an IEC metric Frame size of 130 mm and 4 inches long magnetic stack. This motor has a continuous torque of 10.2 Nm at the stall, a maximum torque of 27.1 Nm, and a rated 2.6 kW output power is observed.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen Bradley MPL-A4540F-SJ22AA is a premium permanent magnet rotary servo motor that belongs to the 200 V alternating current voltage class. This motor has a rated and maximum speed of 3000 RPM and inertia of 0.00052 kg m² which is quite low and perfectly fits the title of low-inertia motors. The high torque specification is also very important as this motor has a maximum highest torque of 27.1 Nm which can be reached in a short time. In addition to that, this motor has a continuous torque of 10.2 Nm at zero speed. This uses an IEC metric Frame size of 4 or it can also be said 130 mm frame size. The rated power of the motor is 2.6 kW output, this results in a high-output motor. The motor can also be mounted using the mounting holes present on the outside. There is a circular bayonet-type connection on the outside of the motor that is facing the shaft. This shaft is keyed and encloses all the components inside. Unfortunately, the shaft is unsealed, which means that the motor is not water-resistant. It also has no brakes which means the information is lost when the power shuts down. Some other factory standard settings include a magnetic stack that goes to be 101.6 mm or 4 inches long. To measure the speed accurately, the module has an absolute encoder with 1024 single-turn sin/cos specifications. Also, a Hiperface protocol is implemented to really reduce the size of the motor and the weight also decreases to be 8.6 kgs or 19 lbs.
MPN | MPL-A4540F-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 4 in |
Rated Speed | 3000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A4540F-SJ22AA?
Answer: Yes. We offer repairs for the MPL-A4540F-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A4540F-SJ22AA?
Answer: If you buy the MPL-A4540F-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A4540F-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-A4540F-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A4540F-SJ22AA?
Answer: The MPL-A4540F-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A4540F-SJ22AA?
Answer: The MPL-A4540F-SJ22AA is part of the MPL Servo Motors series.
Question: Does the MPL-A4540F-SJ22AA have a Brake?
Answer: No brake.
Question: What kind of Connectors does the MPL-A4540F-SJ22AA have?
Answer: The MPL-A4540F-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the Allen Bradley/Rockwell Automation MPL-A4540F-SJ22AA?
Answer: The MPL-A4540F-SJ22AA has Factory Designated Options Standard.
Question: What Feeback does the MPL-A4540F-SJ22AA have?
Answer: The MPL-A4540F-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen Bradley/Rockwell Automation MPL-A4540F-SJ22AA?
Answer: The Allen Bradley/Rockwell Automation MPL-A4540F-SJ22AA has a Frame Size of 165 mm.
Question: What Magnetic Stack Length does the MPL-A4540F-SJ22AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-A4540F-SJ22AA has a Magnetic Stack Length of 4 in.
Question: What Mounting Flange is included with the MPL-A4540F-SJ22AA?
Answer: The MPL-A4540F-SJ22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Allen Bradley-Rockwell Automation MPL-A4540F-SJ22AA have?
Answer: The MPL-A4540F-SJ22AA has a Rated Speed of 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Allen Bradley/Rockwell Automation MPL-A4540F-SJ22AA?
Answer: The MPL-A4540F-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-A4540F-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A4540F-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A4540F-SJ22AA/A | MPL-A4540F-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.