GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A540K-SJ22AA

MPL-A540K-SJ22AA Image 1 thumbnail
MPL-A540K-SJ22AA Image 2 thumbnail
MPL-A540K-SJ22AA Image 3 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A540K-SJ22AA
Series: MPL

Description:

This MPL-A540K-SJ22AA by Allen Bradley has 4000 RPM speed of its servo motor with the inertia of 0.00147 kg m˛ while belonging to voltage class 200 V AC. The motor has a rate of 5.5 kW power, a continuous torque of 19.4 Nm at the stall, and a maximum stall torque of 48.6 Nm. There are no brakes in the motor, it does have a 4-inch magnetic stack and an IEC metric frame size 5.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Belonging to the low inertia permanent magnet series, this MPL-A540K-SJ22AA by the Allen Bradley is 0.00147 kg m² that is a member of the 200 Volts alternating current class. The motor reaches the peak torque of 48.6 Nm in a very small duration, maintains continuous 19.6 Nm torque when at a stall, and also a rate of 5.5 kW output power. This motor has a frame size of 165 mm or according to the IEC metric standard frame size 5. The magnetic stack extends to about 101.6 mm or 4 inches and there is also a keyed shaft inside the motor. Both the keyed shaft and magnetic stack provide security and rigidity to the motor. The motor enclosures have IP50 and IP66 ratings given to them which essentially means that the dust can not come inside the motor through the enclosures but still there is no shaft seal. The absence of a shaft seal means that the water and moisture can still damage the interior circuitry. It is mandatory to keep this in a dry and well-ventilated environment. MPL-A540K-SJ22AA has a rated speed of 4000 RPM and to measure this high speed, an absolute single 1024 turn sin/cos encoder. A Hiperface protocol is implemented which adds to the reduction of the size of the motor. This protocol ensures that a minimum number of wires or cables are used and even after the reduced size the components add to the weight of the motor and it weighs 15 kg or 33 lbs. 

Technical Specifications

MPN MPL-A540K-SJ22AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 165 mm
Magnetic Stack Length 4 in
Rated Speed 4000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the MPL-A540K-SJ22AA?

Answer: Yes. We offer repairs for the MPL-A540K-SJ22AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A540K-SJ22AA?

Answer: If you buy the MPL-A540K-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A540K-SJ22AA online?

Answer: Yes. Automation Stop sells the MPL-A540K-SJ22AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A540K-SJ22AA?

Answer: The MPL-A540K-SJ22AA is made by Allen Bradley - Motors.


Question: Does the Rockwell-Automation MPL-A540K-SJ22AA have a Brake?

Answer: No brake.


Question: What kind of Connectors does the MPL-A540K-SJ22AA have?

Answer: The MPL-A540K-SJ22AA includes Circular bayonet, facing shaft for its Connectors.


Question: What Factory Designated Options are included with the Allen Bradley Automation MPL-A540K-SJ22AA?

Answer: The MPL-A540K-SJ22AA includes Standard for its Factory Designated Options.


Question: What Feeback does the MPL-A540K-SJ22AA have?

Answer: The MPL-A540K-SJ22AA has a Single-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the Allen Bradley/Rockwell Automation MPL-A540K-SJ22AA?

Answer: The MPL-A540K-SJ22AA has a Frame Size of 165 mm.


Question: What is the Magnetic Stack Length of the Rockwell-Automation MPL-A540K-SJ22AA?

Answer: The Rockwell-Automation MPL-A540K-SJ22AA has a Magnetic Stack Length of 4 in.


Question: What Mounting Flange does the MPL-A540K-SJ22AA have?

Answer: The MPL-A540K-SJ22AA has a IEC Metric Mounting Flange.


Question: What is the Rated Speed of the Allen Bradley-Rockwell Automation MPL-A540K-SJ22AA?

Answer: The Rated Speed of the Allen Bradley-Rockwell Automation MPL-A540K-SJ22AA is 4000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the MPL-A540K-SJ22AA have?

Answer: The MPL-A540K-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the MPL-A540K-SJ22AA?

Answer: The Allen Bradley Automation MPL-A540K-SJ22AA has a Voltage Class of 200V.


Series information for MPL-A540K-SJ22AA

For additional information about MPL-A540K-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A540K-SJ22AA.

Revision Part # Also Known As Availability
MPL-A540K-SJ22AA/A MPL-A540K-SJ22AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A540K-5J22AA
  • MPL-A54OK-SJ22AA
  • MPL-A54OK-5J22AA
  • MPL-AS40K-SJ22AA
  • MPL-AS40K-5J22AA
  • MPL-AS4OK-SJ22AA
  • MPL-AS4OK-5J22AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP