GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4540F-MJ22AA |
Series: | MPL Servo Motors |
Description:
Product number MPL-B4540F-MJ22AA is a servo motor that was designed and manufactured by Allen Bradley / Rockwell Automation. This servo motor is classified as a 400-volt servo motor with a frame size measuring 130 millimeters. The magnetic stack length of this device measures 4.0 inches. This servo motor has a rated speed of 3000 rpm. This motor is equipped with a multi-turn, high-resolution encoder, as well as a circular bayonet connector.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This unit, the MPL-B4540F-MJ22AA, was built by the Allen Bradley company to serve as a servo motor. This servo motor's job is to accept a control signal representing a desired output position of the servo shaft and apply power to its DC motor until its shaft rotates to that point. This module by Allen Bradley belongs to the four hundred (400) volts voltage class of servo motors. Aside from that, the frame size of this Allen Bradley servo motor measures up to be around one hundred and thirty (130) millimeters, and it has a magnetic stack length that measures up to be around four (4) inches. Furthermore, this Allen Bradley module also has a speed rated at three thousand (3000) rpm. Anyone operating this module must focus on ensuring that the atmospheric operating temperature ranges from zero (0) degrees Celsius to forty (40) degrees Celsius and that the module is stored in a temperature between negative thirty (-30) degrees Celsius to seventy (70) degrees Celsius. This unit must also be stored in a place with the appropriate levels of humidity. The relative humidity levels of the surrounding area should range from five (5) percent to ninety-five (5) percent with no condensation. This Allen Bradley servo motor does not come included with a brake. This motor does, however come equipped with an IEC metric flange. Additionally, this servo motor has a circular bayonet connector. This connector is orientated to where it is facing the shaft of this Allen Bradley servo motor.
MPN | MPL-B4540F-MJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 4 in |
Rated Speed | 3000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4540F-MJ22AA?
Answer: Yes. We offer repairs for the MPL-B4540F-MJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4540F-MJ22AA?
Answer: If you buy the MPL-B4540F-MJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4540F-MJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B4540F-MJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4540F-MJ22AA?
Answer: The MPL-B4540F-MJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4540F-MJ22AA?
Answer: The MPL-B4540F-MJ22AA is part of the MPL Servo Motors series.
Question: Does the Rockwell Automation MPL-B4540F-MJ22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the MPL-B4540F-MJ22AA?
Answer: The MPL-B4540F-MJ22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Rockwell Automation MPL-B4540F-MJ22AA have?
Answer: The MPL-B4540F-MJ22AA has Factory Designated Options Standard.
Question: What Feeback is included with the Allen-Bradley MPL-B4540F-MJ22AA?
Answer: The MPL-B4540F-MJ22AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen Bradley Automation MPL-B4540F-MJ22AA?
Answer: The Frame Size of the Allen Bradley Automation MPL-B4540F-MJ22AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B4540F-MJ22AA?
Answer: The Magnetic Stack Length of the MPL-B4540F-MJ22AA is 4 in.
Question: What Mounting Flange is included with the MPL-B4540F-MJ22AA?
Answer: The MPL-B4540F-MJ22AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the Allen Bradley/Rockwell Automation MPL-B4540F-MJ22AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B4540F-MJ22AA has a Rated Speed of 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the Rockwell Automation MPL-B4540F-MJ22AA have?
Answer: The Rockwell Automation MPL-B4540F-MJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4540F-MJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4540F-MJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4540F-MJ22AA/A | MPL-B4540F-MJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.