GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-AENTR

✓ In Stock

1734-AENTR Image 1 thumbnail
1734-AENTR Image 2 thumbnail
1734-AENTR Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-AENTR
Series: Point I/O 1734
UPC: 10612598350145

Description:

The 1734- AENTR is a POINT I/O 2 Port EtherNet/IP adapter by Allen-Bradley and Rockwell Automation. It has a 50 Volt continuous isolation voltage with basic insulation type and a maximum fieldbus power current of 10 Amps. This hardware has an expansion I/O capacity maximum of 63 modules, 5 rack optimized connections, and 20 direct connections.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 1734-AENTR by Allen-Bradley and Rockwell Automation is a POINT I/O 2 Port EtherNet/IP adapter. The 1734-AENTR has an expansion I/O capacity maximum of 63 modules, 5 rack optimized connections, and 20 direct connections. This adapter has a backplane current output of 0.8 Amps and an ethernet communication rate of 10/100 Megabytes per second, half or full-duplex. The 1734-AENTR has no enclosure type rating (open style) and has an approximate weight of 280 grams, or 9.87 ounces. It has approximate dimensions of 76.2 x 73.0 x 133.4 millimeters, or 3.0 x 2.87 x 5.25 inches. The 1734-AENTR has LED indicators for adapter, network, and POINTBus status, as well as network activity, system power, field power, and link activity status.

Nominal input voltage rating is 24 Volts DC while input voltage range is 10…28.8 Volts DC. Maximum inrush current is 6 Amps for 10 milliseconds and maximum power consumption is 10.4 Watts at 28.8 Volts DC. Maximum power dissipation for the 1734-AENTR is 6.3 Watts at 28.8 Volts DC and maximum thermal dissipation is 21.5 British Thermal Units (BTU) per hour at 28.8 Volts DC. Environmental specifications for this hardware include an operating temperature between -20 and 55 degrees Celsius and a storage temperature between -40 and 85 degrees Celsius. Relative humidity is 5% to 95%, non-condensing. The vibration rating is 5 g at 10…500 Hertz and is compliant with IEC 60068-2-6, while the operating shock is 30 g and compliant with IEC 60068-2-27; non-operating shock is 50 g and compliant with IEC 60068-2-27.

Technical Specifications

Region of Manufacture* Singapore
Brand: Allen-Bradley
Manufacturer: Rockwell Automation
Backplane Current Output: 0.8 Amps
Ethernet Communication Rate: 10/100 Megabytes per second, half or full-duplex
Enclosure Type Rating: None (Open-Style)
Weight (Approx.): 280 grams (9.87 ounces)
Dimensions (Approx.): 76.2 x 73.0 x 133.4 millimeters (3.0 x 2.87 x 5.25 inches)
Nominal Input Voltage Rating: 24 Volts DC
Input Voltage Range: 10…28.8 Volts DC
Maximum Inrush Current: 6 Amps for 10 Milliseconds
Maximum Power Consumption: 10.4 Watts at 28.8 Volts DC
Maximum Power Dissipation: 6.3 Watts at 28.8 Volts DC
Maximum Thermal Dissipation: 21.5 British Thermal Units (BTU) per Hour at 28.8 Volts DC
Operating Temperature: -20 to 55 degrees Celsius
Storage Temperature: -40 to 85 degrees Celsius
Relative Humidity: 5% to 95%, Non-Condensing
Vibration: 5 g at 10…500 Hertz
Operating Shock: 30 g
Non-Operating Shock: 50 g

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1734-AENTR?

Answer: Yes. We offer repairs for the 1734-AENTR and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-AENTR?

Answer: If you buy the 1734-AENTR through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-AENTR online?

Answer: Yes. Automation Stop sells the 1734-AENTR online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-AENTR?

Answer: The 1734-AENTR is made by Allen Bradley - PLC.


Question: What type of product is the 1734-AENTR?

Answer: The 1734-AENTR is part of the Point I/O 1734 series.


Question: What is the Backplane Current Output: of the Rockwell-Automation 1734-AENTR?

Answer: The 1734-AENTR has a Backplane Current Output: of 0.8 amperes.


Question: What Brand: does the 1734-AENTR have?

Answer: The 1734-AENTR has a AB Brand:.


Question: What is the Dimensions (Approx.): of the Allen Bradley 1734-AENTR?

Answer: The Dimensions (Approx.): of the 1734-AENTR is 76.2 x 73.0 x 133.4 millimeters (3.0 x 2.87 x 5.25 (in)).


Question: Does the 1734-AENTR have a Enclosure Type Rating:?

Answer: None (Open-Style).


Question: What is the Ethernet Communication Rate: of the 1734-AENTR?

Answer: The Ethernet Communication Rate: of the Allen-Bradley 1734-AENTR is 10/100 Megabytes per second, half or full-duplex.


Question: What Input Voltage Range: does the 1734-AENTR have?

Answer: The Input Voltage Range: of the 1734-AENTR is 10…28.8 Volts direct current (DC).


Question: What Manufacturer: does the Allen Bradley-Rockwell Automation 1734-AENTR have?

Answer: The 1734-AENTR has a Rockwell Automation Manufacturer:.


Question: What Maximum Inrush Current: does the 1734-AENTR have?

Answer: The Maximum Inrush Current: of the Allen Bradley-Rockwell Automation 1734-AENTR is 6 amperes for 10 Milliseconds.


Question: What is the Maximum Power Consumption: of the 1734-AENTR?

Answer: The Maximum Power Consumption: of the Allen-Bradley 1734-AENTR is 10.4 Watts at 28.8 Volts DC.


Question: What is the Maximum Power Dissipation: of the 1734-AENTR?

Answer: The Allen Bradley-Rockwell Automation 1734-AENTR has a Maximum Power Dissipation: of 6.3 Watts at 28.8 Volts DC (direct current).


Question: What is the Maximum Thermal Dissipation: of the Rockwell-Automation 1734-AENTR?

Answer: The 1734-AENTR has a Maximum Thermal Dissipation: of 21.5 British Thermal Units (BTU) per Hour at 28.8 Volts DC (direct current).


Question: What is the Nominal Input Voltage Rating: of the Allen Bradley Automation 1734-AENTR?

Answer: The 1734-AENTR has a Nominal Input Voltage Rating: of 24 Volts DC (direct current).


Question: What Non-Operating Shock: does the Rockwell-Automation 1734-AENTR have?

Answer: The Non-Operating Shock: of the 1734-AENTR is 50 g.


Question: What Operating Shock: does the 1734-AENTR have?

Answer: The Operating Shock: of the 1734-AENTR is 30 g.


Question: What Operating Temperature: does the Allen Bradley 1734-AENTR have?

Answer: The 1734-AENTR has a Operating Temperature: of -20 to 55 degrees Celsius.


Question: What Region of Manufacture* is included with the Allen Bradley Automation 1734-AENTR?

Answer: The 1734-AENTR has a Singapore Region of Manufacture*.


Question: Does the Allen Bradley-Rockwell Automation 1734-AENTR have a Relative Humidity:?

Answer: 5% to 95%, Non-Condensing.


Question: What is the Storage Temperature: of the Allen-Bradley 1734-AENTR?

Answer: The 1734-AENTR has a Storage Temperature: of -40 to 85 degrees Celsius.


Question: What is the Vibration: of the Allen-Bradley 1734-AENTR?

Answer: The Vibration: of the Allen-Bradley 1734-AENTR is 5 g at 10…500 Hertz.


Question: What Weight (Approx.): does the 1734-AENTR have?

Answer: The Weight (Approx.): of the 1734-AENTR is 280 grams (9.87 ounces).


Series information for 1734-AENTR

For additional information about 1734-AENTR check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-AENTR.

Revision Part # Also Known As Availability
1734-AENTR/A 1734-AENTR Ser A, Series A, Rev A Request a Quote
1734-AENTR/B 1734-AENTR Ser B, Series B, Rev B Request a Quote
1734-AENTR/C 1734-AENTR Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • I734-AENTR

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP