GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-APB

✓ In Stock

1734-APB Image 1 thumbnail
1734-APB Image 2 thumbnail
1734-APB Image 3 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-APB
Series: Point I/O 1734

Description:

Allen-Bradley produced 1734-APB is indeed a POINT I/O PROFIBUS DP network adapter intended for industrial use. With a 24 Volt DC input voltage and a field-side current of 400 milliamps and an Inrush current of 6 amps, it is a high-performance device. It has a POINTBus current of 1000 milliamps, which is sufficient for this PROFIBUS DP network adapter. Overvoltage protection against reverse polarity is included, and the power dissipation for this module is 2.8 watts at 28.8 volts.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley produced 1734-APB has been a particular kind of PROFIBUS adapter device for input-output points within Bulletin 1734 POINT I/O collection. It can be found on both the backplane's POINT I/O (PointBus) and the PROFIBUS connectivity, which is a plus. Having the adapter in the device in this place allows it to connect with both the input-output point elements and also the PROFIBUS networking concurrently. It works as a central hub on the PointBus and can communicate with up to 63 POINT I/O units at the same time. As a device mostly on PROFIBUS networking, it communicates with the PROFIBUS masters in order to exchange I/O information. This adapter unit offers a standard 24 V DC input voltage limit and a rated power between 10 and 28.8 V DC, making it more suitable for a wide variety of applications. Inrush current of 6 amps is the largest during 10 milliseconds at a current of 1 amp from the PointBus (output) at 5 volts DC 5 percent being the highest for the same time period (4.75 to 5.25).

In the event of an overvoltage on the input, the 1734-APB provides reverse polarity protection. As an added bonus, in the event that the input is stopped or fades out, the voltage output maintains within specifications for milliseconds at 10 V with the maximum load. This adapter for a 1734 based system is installed on the left-hand side of the computer system. It has the capability of supporting a maximum total expansion of 63 modules. It does have a maximum field capacity of 10 amps and current consumption of 75 milliamps, which allows it to power up to 14 I/O units at the same time without overheating. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1734-APB?

Answer: Yes. We offer repairs for the 1734-APB and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-APB?

Answer: If you buy the 1734-APB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-APB online?

Answer: Yes. Automation Stop sells the 1734-APB online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-APB?

Answer: The 1734-APB is made by Allen Bradley - PLC.


Question: What type of product is the 1734-APB?

Answer: The 1734-APB is part of the Point I/O 1734 series.


Series information for 1734-APB

For additional information about 1734-APB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-APB.

Revision Part # Also Known As Availability
1734-APB/A 1734-APB Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1734-AP8
  • I734-APB
  • I734-AP8

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP