GE / IP FANUC Series 90/30 In Stock
sales@automationstop.com
Call Now
(919) 867-5794
Mon-Fri 8AM-5PM EST
| Manufacturer: | Allen Bradley - PLC |
| Product Type: | PLC/Programmable Logic Controller |
| Part Number: | 1734-IA4 |
| Series: | Point I/O 1734 |
Description:
Part number 1734-IA4 is a POINT I/O AC input module. This module is a product of Allen Bradley. It has a total of 4 inputs. These inputs are non-isolated and sinking. The on-state voltage range of this module is 65 volts AC to 132 volts AC, with a nominal on-state voltage of 120 volts AC. The maximum off-state voltage of this module is 43 volts AC. It has a nominal input impedance of 10.6 kilo ohms. It's physical dimensions measure 56.0 mm x 12.0 mm x 75.5 mm. This input module weighs approximately 30.9 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Designed and produced by Allen Bradley / Rockwell Automation, product number 1734-IA4 is a POINT I/O AC input module. This module, which belongs to the Bulletin 1734 series of products, has a total of four (4) inputs. These inputs are in one (1) group and are non-isolated, as well as sinking. The minimum on-state voltage of this device is 65 volts AC, while the maximum on-state voltage is 132 volts AC. This module's nominal on-state voltage, however, is rated at 120 volts AC. The minimum on-state current of this input module is 4.0 milliamperes at 65 volts AC at a frequency of 60 hertz. Additionally, the maximum on-state current is rated at 8.5 milliamperes at 132 volts AC at a frequency of 60 hertz. Furthermore, the nominal on-state current of the Allen Bradley 1734-IA4 is 7.5 milliamperes at 120 volts AC at a 60 hertz frequency. This module has a maximum off-state voltage of 43 volts AC, as well as a maximum off-state current of 2.7 milliamperes at 43 volts AC. The nominal input impedance of this module is rated at 10.6 kilo ohms.
The Allen Bradley 1734-IA4 POINT I/O AC input module has a rated power dissipation of 0.50 watts at 132 volts AC. It also has a rated thermal dissipation of 1.71 BTU/hr at 132 volts AC. The isolation voltage of this input module is 240 volts when operating continuously. The physical dimensions of this input module measure 56.0 millimeters x 12.0 millimeters x 75.5 millimeters (height x width x depth). Additionally, the approximate weight of this device is 30.9 grams, or the equivalent of 1.09 ounces.
FAQ
Question: Does Automation Stop offer repairs on the 1734-IA4?
Answer: Yes. We offer repairs for the 1734-IA4 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734-IA4?
Answer: If you buy the 1734-IA4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734-IA4 online?
Answer: Yes. Automation Stop sells the 1734-IA4 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734-IA4?
Answer: The 1734-IA4 is made by Allen Bradley - PLC.
Question: What type of product is the 1734-IA4?
Answer: The 1734-IA4 is part of the Point I/O 1734 series.
Question: What voltage does the Allen Bradley - PLC 1734-IA4 have?
Answer: The 1734-IA4 includes a voltage of 120.
Series information for 1734-IA4
For additional information about 1734-IA4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-IA4.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1734-IA4/A | 1734-IA4 Ser A, Series A, Rev A | Request a Quote |
| 1734-IA4/B | 1734-IA4 Ser B, Series B, Rev B | Request a Quote |
| 1734-IA4/C | 1734-IA4 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
- 1734-1A4
- I734-IA4
- I734-1A4
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
