GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1734-IB2

✓ In Stock

1734-IB2 Image 1 thumbnail
1734-IB2 Image 2 thumbnail
1734-IB2 Image 3 thumbnail
1734-IB2 Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-IB2
Series: Point I/O 1734

Description:

Manufactured by Allen Bradley, product number 1734-IB2 is a POINT I/O input module. This module has an on-state voltage range of 10 to 28.8 volts DC. Additionally, it has an on-state current range of 2 to 5 milliamperes. This module has a power dissipation rating of 0.7 watts at 28.8 volts DC maximum. It also has a thermal dissipation rating of 2.4 BTU/hr at 28.8 volts DC maximum. This device has physical dimensions that measure 56 mm x 12 mm x 75.5 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1734-IB2 is a POINT I/O input module with 2 channel sink inputs. This module was designed and produced by Allen Bradley / Rockwell Automation. The module is characterized by its two (2) digital inputs and one (1) key switch position. This module has a minimum on-state voltage of 10 volts DC, while its maximum on-state voltage is 28.8 volts DC. This module has a nominal on-state voltage rated at 24 volts DC. Additionally, this device has a minimum on-state current rated at 2 milliamperes, while its maximum on-state current is rated at 5 milliamperes. It also has a nominal on-state current of 4 milliamperes at 24 volts DC. Furthermore, the Allen Bradley 1734-IB2 input module has a maximum off-state voltage rated at 5 volts DC with a minimum off-state current of 1.5 milliamperes. The maximum power dissipation rating of this module is 0.7 watts at 28.8 volts DC. Additionally, the maximum thermal dissipation rating is 2.4 BTU/hr at 28.8 volts DC. The isolation voltage of this device is specified as 50 volts when operating continuously. 

The Allen Bradley 1734-IB2 POINT I/O input module should be operated in an environment where the temperature ranges from -20 to 55 degrees Celsius. Also, when this module needs to be stored, or is not being operated, the temperature of the surrounding area should range from -40 to 85 degrees Celsius. Furthermore, the relative humidity levels suitable for this product range from 5% to 95% and should be non-condensing. This input module has physical dimensions that measure approximately 56 millimeters x 12 millimeters x 75.5 millimeters (height x width x depth). The weight of this module is approximately 30.9 grams, or 1.09 ounces. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1734-IB2?

Answer: Yes. We offer repairs for the 1734-IB2 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-IB2?

Answer: If you buy the 1734-IB2 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-IB2 online?

Answer: Yes. Automation Stop sells the 1734-IB2 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-IB2?

Answer: The 1734-IB2 is made by Allen Bradley - PLC.


Question: What type of product is the 1734-IB2?

Answer: The 1734-IB2 is part of the Point I/O 1734 series.


Question: What voltage does the Allen Bradley - PLC 1734-IB2 have?

Answer: The 1734-IB2 includes a voltage of 24.


Series information for 1734-IB2

For additional information about 1734-IB2 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-IB2.

Revision Part # Also Known As Availability
1734-IB2/A 1734-IB2 Ser A, Series A, Rev A Request a Quote
1734-IB2/B 1734-IB2 Ser B, Series B, Rev B Request a Quote
1734-IB2/C 1734-IB2 Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1734-I82
  • 1734-1B2
  • 1734-182
  • I734-IB2
  • I734-I82
  • I734-1B2
  • I734-182

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP