GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1734-TBCJC

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1734-TBCJC
Series: Point I/O 1734

Description:

Part number 1734-TBCJC is a POINT I/O cold junction compensation wiring base assembly. This device belongs to the Bulletin 1734 product series. It has a supply voltage rating of 28.8 volts DC or 120/240 volts AC. The supply current of this product is rated at 10 amperes maximum. It has physical dimensions that measure 65 mm x 12 mm x 133.4 mm, with an approximate weight of 97.5 grams. The operating temperature suitable for this device ranges from -20 to 55 degrees Celsius.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Designed and produced by the company known as Allen Bradley / Rockwell Automation, part number 1734-TBCJC is a POINT I/O cold junction compensation wiring base assembly. This product was designed to be a part of the Bulletin 1734 product line. The recommended terminal base screw torque for this product ranges from 0.5 to 0.6 Newton-meters (Nm), or the equivalent of 5 to 7 pound-inches (lb-in). The rated supply voltage of this device is 28.8 volts direct current (DC) or 120/240 volts AC. Additionally, the supply current of this Allen Bradley product is rated at 10 amperes maximum. The recommended wire size for this product ranges from 0.25 to 2.5 millimeters squared (mm²), or the equivalent of 24 to 14 American Wire Gauge (AWG), for a thermocouple wire with a maximum insulation of 1.2 millimeters, or 3/64 inches. This POINT I/O cold junction compensation wiring base assembly has an approximate weight of 97.5 grams, or roughly 3.44 ounces. The physical dimensions of this Allen Bradley module measure 65 millimeters x 12 millimeters x 133.4 millimeters, or 2.56 inches x 0.472 inches x 5.25 inches (height x width x depth). 

When operating the Allen Bradley 1734-TBCJC POINT I/O cold junction compensation wiring base assembly, the temperature of the surrounding area should range from -20 to 55 degrees Celsius. Additionally, when storing this device, the temperature should range from -40 to 85 degrees Celsius. The relative humidity should range from 5% to 95% and should be non-condensing. This product can withstand an operating shock rated up 30 G, as well as a non-operating shock rated up to 50 G. It can also withstand a vibration rated at 5 G at a frequency of 10 to 500 hertz. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1734-TBCJC?

Answer: Yes. We offer repairs for the 1734-TBCJC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1734-TBCJC?

Answer: If you buy the 1734-TBCJC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1734-TBCJC online?

Answer: Yes. Automation Stop sells the 1734-TBCJC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1734-TBCJC?

Answer: The 1734-TBCJC is made by Allen Bradley - PLC.


Question: What type of product is the 1734-TBCJC?

Answer: The 1734-TBCJC is part of the Point I/O 1734 series.


Series information for 1734-TBCJC

For additional information about 1734-TBCJC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734-TBCJC.

Revision Part # Also Known As Availability
1734-TBCJC/A 1734-TBCJC Ser A, Series A, Rev A Request a Quote
1734-TBCJC/B 1734-TBCJC Ser B, Series B, Rev B Request a Quote
1734-TBCJC/C 1734-TBCJC Ser C, Series C, Rev C Request a Quote

Common Misspellings:

  • 1734-T8CJC
  • I734-TBCJC
  • I734-T8CJC

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP