GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1734sc-IF4U |
Series: | Point I/O 1734 |
Description:
Part number 1734sc-IF4U is a 4-channel universal input module that was manufactured by Spectrum Controls. It has a total of 4 analog input channels. This product requires an external DC power source that has a nominal supply voltage rated at 24 volts DC, a voltage range of 10 to 28.8 volts DC, and a supply current rated at 20 milliamperes at 24 volts DC. This input module has physical dimensions that measure approximately 56 mm x 12 mm x 75.5 mm. It has an approximate weight of 35 grams.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1734sc-IF4U is a 4-channel universal input module. This module was designed and manufactured by Spectrum Controls. This input module has a total of four (4) analog input channels. These input channels support various input types, such as voltage, RTD, thermocouple, current, and resistance. This module requires an external DC power source with a nominal supply voltage rated at 24 volts DC. Additionally, this power source should have a voltage range of 10 to 28.8 volts DC, as well as a supply current rated at 20 milliamperes at 24 volts DC. It has a POINTBus current rating of 15 milliamperes at 5 volts DC. The power dissipation rating of this 4-channel universal input module is 0.6 watts maximum at 28.8 volts DC, while the thermal dissipation rating is 2.0 BTU/hr maximum at 28.8 volts DC. The Spectrum Controls 1734sc-IF4U 4-channel universal input module has an isolation voltage of 50 volts when operating continuously. Additionally, this product has a basic insulation type from the controller to the field inputs. The 1734sc-IF4U has a 16-bit resolution.
The Spectrum Controls 1734sc-IF4U 4-channel universal input module has several LED indicators. These indicators include one (1) module status LED that lights up green or red, one (1) network status LED that lights up green or red, and four (4) input status LEDs that light up green or red. This input module has an approximate weight of thirty-five (35) grams, or the equivalent of 1.235 ounces. Additionally, the physical dimensions of this produce measure approximately 56 millimeters x 12 millimeters x 75.5 millimeters, or 2.21 inches x 0.47 inches x 2.97 inches (height x width x depth).
Question: Does Automation Stop offer repairs on the 1734sc-IF4U?
Answer: Yes. We offer repairs for the 1734sc-IF4U and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1734sc-IF4U?
Answer: If you buy the 1734sc-IF4U through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1734sc-IF4U online?
Answer: Yes. Automation Stop sells the 1734sc-IF4U online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1734sc-IF4U?
Answer: The 1734sc-IF4U is made by Allen Bradley - PLC.
Question: What type of product is the 1734sc-IF4U?
Answer: The 1734sc-IF4U is part of the Point I/O 1734 series.
For additional information about 1734sc-IF4U check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1734sc-IF4U.
Revision Part # | Also Known As | Availability |
---|---|---|
1734sc-IF4U/A | 1734sc-IF4U Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.