GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-MVI |
Series: | ControlLogix |
Description:
Part number 1756-MVI, which was designed and produced by Allen Bradley / Rockwell Automation, is a ControlLogix multi-vendor interface module that belongs to the Bulletin 1756 series of products. This device has a rated current of 800 milliamperes at 5 volts and 3 milliamperes at 24 volts. This device has a power dissipation rating of 4 to 6.2 kilowatts. The module can work on various communication interfaces, and its communication rate is also configurable. This module does not have an enclosure.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1756-MVI is a ControlLogix multi-vendor interface module designed and manufactured by Allen Bradley / Rockwell Automation. It belongs to the Bulletin 1756 series of products that features MVI modules for the PLCs. This module is engineered to give the user flexible configuration while also being easy to manage. The design aspect of this interface module is compact. This device is equipped with LED indicators that display the status of the channels, allowing diagnosis and troubleshooting to be easier. In addition, this module allows communication to be configurable and supports various communication interfaces such as RS-232, RS-422, RS-485. This module has a rated backplane current of 800 milliamperes at 5 volts. It also has a backplane current of 3 milliamperes at 24 volts. Additionally, the power dissipation rate of this interface module is 4 watts. Besides that, the data rate for the SECROS on this module is 4 to 8 megabits per second. The current rating for the 5.1 volts supply is 1.2 amperes, and it can dissipate 6.2 watts on these power supply ranges. The thermal dissipation of this ControlLogix multi-vendor interface module is 21.2 BTU per hour. Aside from that, the isolation voltage range of this unit is 50 volts when operating continuously. As far as the enclosure rating is concerned, it is not housed with any enclosure. Hence, its operation and maintenance must take place in an environment suitable for this particular unit. The users should adhere to the maker's guidelines to ensure the safety of this module.
Question: Does Automation Stop offer repairs on the 1756-MVI?
Answer: Yes. We offer repairs for the 1756-MVI and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-MVI?
Answer: If you buy the 1756-MVI through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-MVI online?
Answer: Yes. Automation Stop sells the 1756-MVI online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-MVI?
Answer: The 1756-MVI is made by Allen Bradley - PLC.
Question: What type of product is the 1756-MVI?
Answer: The 1756-MVI is part of the ControlLogix series.
For additional information about 1756-MVI check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-MVI.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-MVI/A | 1756-MVI Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.