GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1756-OF6VI |
Series: | ControlLogix |
UPC: | 10612598164667 |
Description:
This is an analog output module. It is manufactured by Allen-Bradley. It has a voltage loop that has 6-point isolated outputs.
This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
1756-oF6V1 is a ControlLogix isolated analog output voltage module. It has 6 points which consist of 20 pins and comes with 6 individuals isolate voltages. The module’s resolution is 14 bits across 21 volts equivalent to 1.3 millivolts. It has a removable terminal block housing such as 1756-TBNH or 1756-TBSH. The removable terminal blocks help by supporting the removal and insertion under power. On installing the removable terminal blocks, various measures are taken which include; ensuring that there is the completion of field-side wiring of the removable terminal blocks, the removable terminal blocks housing is snubbed into place on the removable terminal block and the housing closed. Finally, the locking tap at the top of the module is locked.
This module is mounted on a ControlLogix chassis. For its functionality, this module provides a range of digitals such as diagnostic digital, analog, motion control, and specialty I/O The 1756-OF6VI operates at a temperature range of 0 to 60 degrees Celsius equivalent to 32 to 140 degrees Fahrenheit. It has an isolation voltage of 250 volts continuous which is between the outputs.it requires 2 power sources from the backplane which are 250 milliamperes at 5.1 volts direct current and 17.5 milliamperes at 24 volts direct current. 5.5 Watts of power value is added to the module’s requirements on a chassis.to prevent overloading of the power supply.1756-OF6VI can be installed or removed while chassis power is applied. Before the installation of module 1756 chassis and power supply should be installed and grounded first. The 1756-OF6VI supports the onboard alarming, scaling to engineering units, integer mode IEEE 32-bit floating-point data format, and real-time channel sampling.
Question: Does Automation Stop offer repairs on the 1756-OF6VI?
Answer: Yes. We offer repairs for the 1756-OF6VI and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1756-OF6VI?
Answer: If you buy the 1756-OF6VI through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1756-OF6VI online?
Answer: Yes. Automation Stop sells the 1756-OF6VI online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1756-OF6VI?
Answer: The 1756-OF6VI is made by Allen Bradley - PLC.
Question: What type of product is the 1756-OF6VI?
Answer: The 1756-OF6VI is part of the ControlLogix series.
For additional information about 1756-OF6VI check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-OF6VI.
Revision Part # | Also Known As | Availability |
---|---|---|
1756-OF6VI/A | 1756-OF6VI Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.