GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1756-OV32E

1756-OV32E Image 1 thumbnail
1756-OV32E Image 2 thumbnail
1756-OV32E Image 3 thumbnail
1756-OV32E Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1756-OV32E
Series: ControlLogix

Description:

The 1756-OV32E is a 12 to 24 volts direct current (DC) sink digital output module from Allen-Bradley / Rockwell Automation. The 1756OV32E's operating voltage range is 10 to 30 volts direct current (DC). There are 32 electrically fused outputs in this output module. These outputs are grouped into 2 groups of 16 outputs. The operating temperature range of this device is 0 to 60 degrees Celsius. Additionally, this module's rated relative humidity range is 5 to 95% without condensation.


This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.


Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

To suit your application demands, the 1756 ControlLogix modules offer a comprehensive variety of diagnostic digital, digital, motion, and analog control modules. Furthermore, this module also offers specialized I/O and computing modules. It is a chassis-based module. Any chassis-based modules can be used in a ControlLogix controller's local chassis or a chassis connected to a controller from ControlLogix through ControlNet or IP networks, or Ethernet networks. The 1756-OV32E is a 12 to 24 volts DC sink digital output module from Allen-Bradley / Rockwell Automation. The 1756OV32E's operating voltage range is 10 to 30 volts direct current (DC).

There are 32 electrically fused outputs (16 points per group) in this output module. The 1756-TBCH and 1756-TBS6H are in the house of the removable terminal block. The ControlLogix module 1756-OV32E offers On/Off detection and actuation and is ideal for operating a broad range of output devices, indicators, motor starters, solenoids, and other output devices that need less than one bit to function. It has status indicators for communication, I/O, module health, and direct and rack-optimized connections.

The 1756-OV32E module, like other Allen-Bradley ControlLogix Modules, may use the producer/consumer technique to output information inside the system. A controller from the Logix5000 line satisfies the control needs of the 1756-OV32E output module, from which it receives output commands and multi-casts them to output devices on the network. The operating temperature of the 1756-OV32E module must be kept between 0 and 60 degrees Celsius for optimal performance. Furthermore, the power rating for this module must be kept within the optimal range during both installation and programming. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1756-OV32E?

Answer: Yes. We offer repairs for the 1756-OV32E and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1756-OV32E?

Answer: If you buy the 1756-OV32E through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1756-OV32E online?

Answer: Yes. Automation Stop sells the 1756-OV32E online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1756-OV32E?

Answer: The 1756-OV32E is made by Allen Bradley - PLC.


Question: What type of product is the 1756-OV32E?

Answer: The 1756-OV32E is part of the ControlLogix series.


Question: What can I expect the voltage included with the 1756-OV32E to be?

Answer: The 1756-OV32E by Allen Bradley - PLC has a voltage of 10-30.


Series information for 1756-OV32E

For additional information about 1756-OV32E check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1756-OV32E.

Revision Part # Also Known As Availability
1756-OV32E/A 1756-OV32E Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1756-0V32E
  • 175G-OV32E
  • 175G-0V32E
  • 17S6-OV32E
  • 17S6-0V32E
  • 17SG-OV32E
  • 17SG-0V32E
  • I756-OV32E
  • I756-0V32E
  • I75G-OV32E
  • I75G-0V32E
  • I7S6-OV32E
  • I7S6-0V32E
  • I7SG-OV32E
  • I7SG-0V32E

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP