GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1762-OW16

✓ In Stock

1762-OW16 Image 1 thumbnail
1762-OW16 Image 2 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1762-OW16
Series: MicroLogix 1200
UPC: 10611320152149

Description:

Designed and produced by the company known as Allen Bradley / Rockwell Automation, part number 1762-OW16 is a MicroLogix relay output module. This module has sixteen (16) outputs. The operating voltage range of this device is 5 to 265 volts AC or 5 to 125 volts DC. The heat dissipation rating of this module is 6.1 watts. This module has an IP20 rated enclosure. The physical dimensions of this module measure 90 mm x 40.4 mm x 87 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The Allen-Bradley 1762-OW16 MicroLogix AC/DC relay output module provides 16 normally open outputs. The 1762-OW16 supports voltage rating ranges from 5 volts AC to 265 volts AC and from 5 volts DC to 125 volts DC. This module can be employed by the MicroLogix 1200 controller. The 1762-OW16 module can be used in several applications mainly in the industrial field. The 1762-OW16 module offers the flexibility during the installation and mounting steps with two mounting M4 or #8 screws panel mounting which should be well-grounded or on EN 50 022 - 35 x 7.5 millimetres or EN 50 022 - 35 x 15 millimetres DIN rails. The minimum on-state current for this module is 10 milliamps and the output delay is 10 milliseconds.

This Allen-Bradley 1762-OW16 MicroLogix AC/DC relay contact output module consumes a current consumption of 140 milliamps. The 1762-OW16 Allen-Bradley module can be connected easily to either the controller or to an adjacent I/O module before or after mounting. The 1762-OW16 module dissipates an electrical power of 5.6 watts. This 1762-OW16 module is intended for use in a mainly industrial environment that is clean and dry (Pollution degree 2) and to circuits not exceeding Over Voltage Category II (IEC 60664-1). The 1762-OW16 relay contact output module controls both AC and DC loads on one module. This Allen-Bradley 1762-OW16 MicroLogix AC/DC relay contact output module weighs approximately 285 grams (0.63 pounds) while shipping. This Allen-Bradley module works properly at 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit).

The 1762-OW16 is a MicroLogix output extension module. This module enhances the output power of the MicroLogix 1100, 1200, and 1400 Programmable Logic Controllers (PLCs). It can be used to turn on and off electrical loads. This module has sixteen (16) relay connections that can operate at voltages from 24 to 125 volts DC or 120 to 240 volts AC. With the CLOSED switch, each outgoing channel has a signal delay time of 10 milliseconds. Each module is capable of delivering up to 2.5 amperes of continuous current per point, 8 amperes of continuous current per common, and 16 amperes of continuous current per module. The 1762-OW16 has two (2) output groups, each containing eight (8) channels. Surge suppressors should be included in the inductive load. Surgical protectors can provide protection against high-intensity inductive loads, thus contributing to the life of the module. This device has physical dimensions that measure 90 mm x 40.4 mm x 87 mm, or 3.54 inches x 1.59 inches x 3.43 inches. The approximate weight of this device is 285 grams, or 0.63 pounds. Installation is determined by the base controller. This module supports direct DIN rail and panel mounting, as is the case with the MicroLogix 1100, 1200, and 1400 controllers. This module has an operating temperature that should range from -20 to 65 degrees Celsius. Additionally, when storing this device, the temperature should range from -40 to 85 degrees Celsius. The relative humidity should have levels that range from 5% to 95%, as well as be non-condensing. 

Technical Specifications

Brand Allen-Bradley / Rockwell Automation
Series 1762 MicroLogix AC/DC normally open relay output module
Part Number 1762-OW16
Number of outputs 16
Operating voltage range 5…265V AC, 5…125V DC
Current draw at 5.1V / 24V 120 mA / 140 mA
Heat dissipation 5.6 W
Current per module, max 16 A
Wire size and type 0.325… 2.080 mm2 (22…14 AWG) solid copper wire or 0.325…1.310 mm2 (22…16 AWG) stranded copper wire rated at 90 °C (194 °F ) insulation max
Current per point 2.5 A
Operating temperature range 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit)
Dimensions (H x W x D), approx 90 mm (H) x 87 mm (D) x 40.4 mm (W) (3.54 in. (H) x 3.43 in. (D) x 1.59 in. (W))
Weight 285 grams (0.63 pounds)
Module location DIN rail or panel mount
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1762-OW16?

Answer: Yes. We offer repairs for the 1762-OW16 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1762-OW16?

Answer: If you buy the 1762-OW16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1762-OW16 online?

Answer: Yes. Automation Stop sells the 1762-OW16 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1762-OW16?

Answer: The 1762-OW16 is made by Allen Bradley - PLC.


Question: What type of product is the 1762-OW16?

Answer: The 1762-OW16 is part of the MicroLogix 1200 series.


Question: What Brand does the 1762-OW16 have?

Answer: The Allen Bradley Automation 1762-OW16 has a Allen Bradley (AB) / Rockwell Automation Brand.


Question: What Current draw at 5.1 volts / 24V does the Allen Bradley/Rockwell Automation 1762-OW16 have?

Answer: The Allen Bradley/Rockwell Automation 1762-OW16 has a Current draw at 5.1 volts / 24V of 120 mA / 140 mA.


Question: What is the Current per module, max of the 1762-OW16?

Answer: The 1762-OW16 has a Current per module, max of 16 A.


Question: What Current per point does the Allen Bradley 1762-OW16 have?

Answer: The Current per point of the Allen Bradley 1762-OW16 is 2.5 A.


Question: What is the Dimensions (H x W x D), approx of the 1762-OW16?

Answer: The Dimensions (H x W x D), approx of the 1762-OW16 is 90 mm (H) x 87 mm (D) x 40.4 mm (W) (3.54 in. (H) x 3.43 in. (D) x 1.59 in. (W)).


Question: What is the Heat dissipation of the Allen Bradley-Rockwell Automation 1762-OW16?

Answer: The 1762-OW16 has a Heat dissipation of 5.6 W.


Question: What Module location does the Allen Bradley 1762-OW16 have?

Answer: The Allen Bradley 1762-OW16 has a DIN rail or panel component mount Module location.


Question: What is the Number of outputs of the 1762-OW16?

Answer: The 1762-OW16 has a Number of outputs of 16.


Question: What is the Operating temperature range of the 1762-OW16?

Answer: The Operating temperature range of the 1762-OW16 is 0 degrees to 55 degrees Celsius (32 degrees to 131 degrees Fahrenheit) .


Question: What is the Operating voltage range of the 1762-OW16?

Answer: The Allen Bradley 1762-OW16 has a Operating voltage range of 5…265 volts AC (alternating current), 5…265 volts DC (direct current).


Question: What component Number does the 1762-OW16 have?

Answer: The Allen Bradley 1762-OW16 has a unit Number of 1762-OW16.


Question: What Weight does the Allen Bradley-Rockwell Automation 1762-OW16 have?

Answer: The Allen Bradley-Rockwell Automation 1762-OW16 has a Weight of 285 grams (0.63 pounds).


Question: What Wire size and type does the 1762-OW16 have?

Answer: The Wire size and type of the Allen Bradley/Rockwell Automation 1762-OW16 is 0.325… 2.080 mm2 (22…14 AWG) solid copper wire or 0.325…1.310 mm2 (22…16 AWG) stranded copper wire rated at 90 °C (194 °F ) insulation max.


Series information for 1762-OW16

For additional information about 1762-OW16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1762-OW16.

Revision Part # Also Known As Availability
1762-OW16/A 1762-OW16 Ser A, Series A, Rev A Request a Quote
1762-OW16/B 1762-OW16 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1762-OW1G
  • 1762-OWI6
  • 1762-OWIG
  • 1762-0W16
  • 1762-0W1G
  • 1762-0WI6
  • 1762-0WIG
  • 17G2-OW16
  • 17G2-OW1G
  • 17G2-OWI6
  • 17G2-OWIG
  • 17G2-0W16
  • 17G2-0W1G
  • 17G2-0WI6
  • 17G2-0WIG
  • I762-OW16
  • I762-OW1G
  • I762-OWI6
  • I762-OWIG
  • I762-0W16
  • I762-0W1G
  • I762-0WI6
  • I762-0WIG
  • I7G2-OW16
  • I7G2-OW1G
  • I7G2-OWI6
  • I7G2-OWIG
  • I7G2-0W16
  • I7G2-0W1G
  • I7G2-0WI6
  • I7G2-0WIG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP