GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-IVN |
Series: | PLC 5 |
Description:
The Allen Bradley 1771-IVN is a PLC 5 series input module that can be employed as a necessary element in a PLC 5 control system. It is compatible with most of the chassis in the Bulletin 1771 product series. This device supports 32 inputs that are divided into 4 groups of 8 inputs. This device has an operating voltage rated at 10 to 30 volts DC. The backplane current rating is 280 milliamperes. The operating temperature range for this device should remain between 0 and 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1771-IVN is a digital DC input module from Allen Bradley / Rockwell Automation. It belongs to the PLC-5 series of products. Also, the manufacturers have designed it for the PLC control systems. Additionally, the manufacturers have made this module compatible with almost all the I/O chassis featured in the Bulletin 1771 product line. It supports 32 inputs divided into four (4) sets of eight (8) inputs. It operates on 10 to 30 Volts DC power. The backplane current draw of this module is 280 mA. Its maximum DC Off-state current range is 1.7 mA. At the same time, the module's AC signal delay-off range is 45 (+/- 15) milliseconds. Aside from that, its signal delay-off range is 6 (+/- 2) milliseconds. The wiring compatibility of this unit is with 1771-WN. In addition, one of the significant product applications of this module is that it includes half slot addressing, implying that it can support this feature excellently. Additionally, it is fit for the single slot addressing, though it can do single slot addressing tasks under the right circumstances. On the other hand, it is incompatible with the two-slot addressing option. This unit can be rack-mounted and use 32 input image bits for the data table. Regardless, it does not support output image bits. In a nutshell, it is designed for sourcing inputs, and it intends to be used with the sinking outputs and guarantees a durable design concept with a high-performance efficiency rate. This device should be operated in an area with a temperature range of 0 to 60 degrees Celsius.
Type | I/O Module |
Question: Does Automation Stop offer repairs on the 1771-IVN?
Answer: Yes. We offer repairs for the 1771-IVN and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-IVN?
Answer: If you buy the 1771-IVN through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-IVN online?
Answer: Yes. Automation Stop sells the 1771-IVN online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-IVN?
Answer: The 1771-IVN is made by Allen Bradley - PLC.
Question: What type of product is the 1771-IVN?
Answer: The 1771-IVN is part of the PLC 5 series.
For additional information about 1771-IVN check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-IVN.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-IVN/A | 1771-IVN Ser A, Series A, Rev A | Request a Quote |
1771-IVN/B | 1771-IVN Ser B, Series B, Rev B | Request a Quote |
1771-IVN/C | 1771-IVN Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.