GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OA |
Series: | PLC 5 |
UPC: | 10662468205761 |
Description:
Part number 1771-OA, designed and manufactured by the Allen-Bradley company, is an AC output module.This device has 8 discrete out channels, as well as 8 neon status indiators. The output voltage range of this device is 92 to 138 volts AC at a frequency of 47 to 63 hertz. The output current rating is 1.5 amperes per output. This product has a power dissipation rating of 1.1 watts minimum and 10.7 watts maximum. The operating temperature range is 0 to 60 degrees Celsius at a relative humidity range of 5% to 95% non-condensing.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 1771-OA is an AC output module that was designed and manufactured by the Allen-Bradley company. This product has eight (8) discrete output channels equipped to it. The output voltage range of this product is 92 to 138 volts AC (alternating current) at a 47 to 63 hertz (Hz) frequency. This device also has a rated output current of 1.5 amperes per output. The on state voltage drop for this Allen-Bradley product is two (2) volts at one hundred (100) milliamperes while the off state leakage current is five (5) milliamperes per output at one hundred and twenty (120) volts AC at maximum. This unit has a power dissipation of 10.7 watts (W) maximum and 1.1 watts (W) minimum. Additionally, the thermal dissipation is 36.6 BTU/hr maximum and 3.4 BTU/hr minimum. The adjacent slot power dissipation for this product is fifteen (15) watts (W). This Allen-Bradley device's backplane current is two hundred and ten (210) milliamperes at five (5) volts DC (direct current).
When it comes to the Allen-Bradley 1771-OA, there are numerous environmental conditions that should be made aware of. The ambient temperature around the device when it needs to be operated should be kept within the range of 0 - 60 °C, or the equivalent of 32 - 140 °F. The temperature around the device when it needs to be stored, however, should be kept within the range of -40 - 85 °C, or -40 - 185 °F when converted. Additionally, the relative humidity should be five percent to ninety-five percent (5% - 95%) non-condensing.
Type | I/O Module |
Question: Does Automation Stop offer repairs on the 1771-OA?
Answer: Yes. We offer repairs for the 1771-OA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OA?
Answer: If you buy the 1771-OA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OA online?
Answer: Yes. Automation Stop sells the 1771-OA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OA?
Answer: The 1771-OA is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OA?
Answer: The 1771-OA is part of the PLC 5 series.
For additional information about 1771-OA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OA.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OA/A | 1771-OA Ser A, Series A, Rev A | Request a Quote |
1771-OA/B | 1771-OA Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.