GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 1771-OFE1

✓ In Stock

1771-OFE1 Image 1 thumbnail
1771-OFE1 Image 2 thumbnail
1771-OFE1 Image 3 thumbnail
1771-OFE1 Image 4 thumbnail
Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1771-OFE1
Series: PLC 5
UPC: 10612598003058

Description:

Product number 1771-OFE1 is an analog output module that was designed and produced by Allen Bradley. This module has a total of 4 individually isolated outputs. It has nominal output voltage ranges of +1 to +5 volts DC, -10 to +10 volts DC, or 0 to +10 volts DC. The maximum output current of this module is 10 milliamperes per channel. It has a backplane power rating of 1.50 amperes. The power dissipation of this device is rated at 7.9 watts. It also has a thermal dissipation rating of 26.8 BTU/hr.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 1771-OFE1 is an analog output module. It was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This device belongs to the Bulletin 1771 series of products, as well as the PLC 5 series of products. This device has a total of four (4) individually isolated outputs. This product has nominal output voltage ranges of +1 to +5 volts DC, -10 to +10 volts DC, or 0 to +10 volts DC. The Allen Bradley 1771-OFE1 analog output module has a maximum output current rated at 10 milliamperes per channel when operating in voltage mode. The digital resolution of this device is 12-bit Binary. The output capacitance rating of this module is 0.01 microfarad for voltage outputs, as well as 0.022 microfarad for current outputs. Additionally, this analog output module has an output impedance rating of less than 0.25 ohms for voltage outputs, as well a greater than 1.5 megohms for current outputs. The backplane power of this Allen Bradley analog output module is rated at 1.50 amperes. This module has a power dissipation rating of 7.9 watts, while the thermal dissipation is rated at 26.9 BTU/hr. This analog output module has an isolation rating of 1000 volts rms between its output channels. This analog output module should be operated in an environment where the temperature ranges from 0 to 60 degrees Celsius, or the equivalent temperature range of 32 to 140 degrees Fahrenheit. The storage temperature suitable for this module is -40 to 85 degrees Celsius, or -40 to 185 degrees Fahrenheit. The recommended humidity range for this device is 5% to 95%. The humidity should also be non-condensing.

Technical Specifications

Region of Manufacture* United States
Type PLC Output Module

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 1771-OFE1?

Answer: Yes. We offer repairs for the 1771-OFE1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OFE1?

Answer: If you buy the 1771-OFE1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1771-OFE1 online?

Answer: Yes. Automation Stop sells the 1771-OFE1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1771-OFE1?

Answer: The 1771-OFE1 is made by Allen Bradley - PLC.


Question: What type of product is the 1771-OFE1?

Answer: The 1771-OFE1 is part of the PLC 5 series.


Question: What Region of Manufacture* does the 1771-OFE1 have?

Answer: The Rockwell Automation 1771-OFE1 has a United States Region of Manufacture*.


Series information for 1771-OFE1

For additional information about 1771-OFE1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OFE1.

Revision Part # Also Known As Availability
1771-OFE1/A 1771-OFE1 Ser A, Series A, Rev A Request a Quote
1771-OFE1/B 1771-OFE1 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 1771-OFEI
  • 1771-0FE1
  • 1771-0FEI
  • 177I-OFE1
  • 177I-OFEI
  • 177I-0FE1
  • 177I-0FEI
  • I771-OFE1
  • I771-OFEI
  • I771-0FE1
  • I771-0FEI
  • I77I-OFE1
  • I77I-OFEI
  • I77I-0FE1
  • I77I-0FEI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP