GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1771-OW |
Series: | PLC 5 |
Description:
The 1771-OW is relay contact output module of Allen Bradley. It has eight (8) selectable outputs distributed into four (4) groups, with each group having two (2) outputs. It gives an output power of 30 volts for both alternating current (AC) and direct current (DC). The voltage rating of this module is 24 to 125 volts DC and 24 to 138 volts AC. The current rating is one (1) ampere. This module has an operational temperature range of 32 to 140 degrees Fahrenheit.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1771-OW is relay contact output module of Allen Bradley. It has 8 selectable outputs distributed into 4 groups, each group of a 2. The module is fitted in a 1771 I/O chassis. This module has a voltage rating of 24 to 125 volts DC and 24 to 138 volts AC, with a current rating of 1A. It gives an output power of 30 V for both AC and DC. The product meets the Council Directive 73/23/EEC Low Voltage and being tested. The module has a bounce time and release/ operate time of 1ms and 5ms respectively, with a 10 hertz switching frequency. This relay is powered through a backplane power supply with a 700mA backplane current. The thermal dissipation of the module ranges from 11.3 BTU/hr to 12.6 BTU/hr and power dissipation of 3.3 W to 3.7 W. The wire used has the size of 2mm and the arm screw torque is around 7-9 in-pound. Use the plastic keying bands to configure the I/O slots to only accept the 1771-OW. Place them between pins 18 and 16, and pins 8 and 6. Except for the leftmost connection, which only accepts adapter or processor modules, this output module can be placed into any slot. The relay output jumpers are configured to N.O functioning at the manufacturer. Each output can be adjusted to either N.C. or N.O. This module has both a storage and operating temperature range of about -40 to 185 ℉ and 32 to 140℉, respectively, with a relative humidity range of 5 to 95%.
Region of Manufacture* | United States |
Type | I/O Module |
*Region of Manufacture may vary
Question: Does Automation Stop offer repairs on the 1771-OW?
Answer: Yes. We offer repairs for the 1771-OW and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1771-OW?
Answer: If you buy the 1771-OW through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1771-OW online?
Answer: Yes. Automation Stop sells the 1771-OW online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1771-OW?
Answer: The 1771-OW is made by Allen Bradley - PLC.
Question: What type of product is the 1771-OW?
Answer: The 1771-OW is part of the PLC 5 series.
Question: What Region of Manufacture* is included with the Rockwell Automation 1771-OW?
Answer: The Rockwell Automation 1771-OW has a United States Region of Manufacture*.
For additional information about 1771-OW check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1771-OW.
Revision Part # | Also Known As | Availability |
---|---|---|
1771-OW/A | 1771-OW Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.