GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - PLC |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1790D-T8BV8B |
Series: | 1790D |
UPC: | 10612598279200 |
Description:
The Allen-Bradley 1790D-T8BV8B is a CompactBlock LDX base module. The module has a nominal voltage rating of 24 VDC and a voltage range of 11-28.8 VDC. The 1790D-T8BV8B comes with support for 8 output, and 8 input channels. The 1790D-T8BV8B is a base module and has a power dissipation rate of 1.2 W max at 28.8 VDC. The input impedance rating on this module is 4.8 kiloohms. The 1790D-T8BV8B has eight status indicators.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1790D-T8BV8B is a CompactBlock LDX base module. The module also comes equipped with eight universal sourcing outputs and eight universal input modules. The module is able to accept both non-isolated sourcing and non-isolated sinking-type inputs. The 1790D-T8BV8B has requires an on-state minimum voltage of 9.6 volts DC. The on-state voltage is typically 24 VDC and can increase to a maximum of 28.8 VDC. At 28.8 volts DC, the module has an on-state current rating of 8 mA per point. This CompactLogix unit has a maximum off-state voltage rating of 5 VDC and a nominal input impedance rating of 4.8 kiloohms. Each of the input and output points has its own LED status indicator. The module's output points can either be sourcing or non-isolation type outputs. The Allen-Bradley 1790D-T8BV8B CompactBlock LDX base module comes with a minimum on-state voltage rating of 10 volts DC for the eight output points. The nominal on-state voltage for outputs is 24 VDC, and the module registers a maximum on-state voltage of 28.8 VDC. 0.5 volts Direct Current is the maximum on-state drop rate for this base module. One mA is the minimum on-state current rating per channel. The maximum off-state leakage of the module is 0.5 milliamps. Each of the outputs on this module comes with an LED indicator. The base module has a maximum power dissipation of 1.2 watts at 28.8 VDC. The field power has a voltage range of 10 to 28.8 VDC, with a nominal supply voltage of 24 VDC. There is an integrated DeviceNet interface on this Allen-Bradley base module.
Question: Does Automation Stop offer repairs on the 1790D-T8BV8B?
Answer: Yes. We offer repairs for the 1790D-T8BV8B and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - PLC and 1790D-T8BV8B?
Answer: If you buy the 1790D-T8BV8B through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1790D-T8BV8B online?
Answer: Yes. Automation Stop sells the 1790D-T8BV8B online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1790D-T8BV8B?
Answer: The 1790D-T8BV8B is made by Allen Bradley - PLC.
For additional information about 1790D-T8BV8B check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1790D-T8BV8B.
Revision Part # | Also Known As | Availability |
---|---|---|
1790D-T8BV8B/A | 1790D-T8BV8B Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.