GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 150-F25NBD

✓ In Stock

150-F25NBD Image 1 thumbnail
150-F25NBD Image 2 thumbnail
150-F25NBD Image 3 thumbnail
Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 150-F25NBD
Series: SMC-Flex

Description:

The 150-F25NBD enhances both the motor start and stop efficiency employing microprocessor-based soft starters with seven start and stop modes. This Allen-Bradley controller can be used with 3-phase motors and includes six silicon controlled rectifiers (SCRs) to control the conduction time, minimize the heat, and monitor the motor torque and voltage during different phases such as starting, running, and stopping. This 150-F25NBD SMC FLEX controller delivers a power of 15 horsepower and 11 Kilowatts. This motor controller permits to control the voltage rating range from 200 Volts AC to 460 Volts AC with a motor current draw of 25 Amperes. The 150-F25NBD controller handles the SCRs during the switching current process which allows an increase in robustness and lifetime for harsher environments. The 150-F25NBD smart motor modular controller provides a front keypad with liquid crystal display (LCD). The 150-F25NBD controller includes one DPI port to link communication modules and an extra-human interface. This Allen-Bradley product can operate at a temperature range of -5 degrees to +50 degrees Celsius (23 degrees to 122 degrees Fahrenheit) for industrial applications and weighs approximately 5.7 kilograms (12.5 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 150-F25NBD enhances both the motor start and stop efficiency employing microprocessor-based soft starters with seven start and stop modes. This Allen-Bradley controller can be used with 3-phase motors and includes six silicon controlled rectifiers (SCRs) to control the conduction time, minimize the heat, and monitor the motor torque and voltage during different phases such as starting, running, and stopping. This 150-F25NBD SMC FLEX controller delivers a power of 15 horsepower and 11 Kilowatts. This motor controller permits to control the voltage rating range from 200 Volts AC to 460 Volts AC with a motor current draw of 25 Amperes. The 150-F25NBD controller handles the SCRs during the switching current process which allows an increase in robustness and lifetime for harsher environments.

The 150-F25NBD smart motor modular controller provides a front keypad with liquid crystal display (LCD). The 150-F25NBD controller includes one DPI port to link communication modules and an extra-human interface. This motor controller includes a concise footprint and design with a cost-effective enclosure, overload security, integrated bypass and motor system fault diagnostics. This controller includes fan assembly in its package for the controller cooling to prevent heat issues. The 150-F25NBD controller includes a rotary dial and dual-in-line (DIP) switches to make an easy and secure installation to control 3-phase motors. The 150-F25NBD controller is suitable for industrial applications. This Allen-Bradley product can operate at a temperature range of -5 degrees to +50 degrees Celsius (23 degrees to 122 degrees Fahrenheit) for industrial applications and weighs approximately 5.7 kilograms (12.5 pounds) while shipping.

Technical Specifications

MPN 150-F25NBD
Manufacturer Allen Bradley / Rockwell Automation
Dimension - Width 150.1 (5.91)
Dimension - Height 307 (12.09)
Dimension - Depth 203.1 (8.00)
Dimension - Approx Ship. Wt. 5.7 (12.6)
Amps 25
HP 15 HP @ 460V AC
Voltage 100...240V AC (5...480 A units)
Brand Allen-Bradley / Rockwell Automation
Series 200/460V AC SMC Flex smart line-connected motors controller
Part Number 150-F25NBD
Bulletin number Solid-state controller
Controller type SMC Flex
Ampere ratings 25 A
Enclosure type Open
Input line voltage 200…460V AC, 3-Phase, 50 and 60 Hz
Control voltage 100…240V AC (5…480 A units)
Power rating 15 Hp, 11 KW
Operating frequency 50/60 Hz
Number of poles 3-phase
Rated impulse voltage 6 kV
Weight 5.7 kg (12.5 lb)
Dimension 321.0 mm (H) x 150.0 mm (W) x 203.0 mm (D)
Operating temperature range -5…+50 °C (23…122 °F)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 150-F25NBD?

Answer: Yes. We offer repairs for the 150-F25NBD and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F25NBD?

Answer: If you buy the 150-F25NBD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 150-F25NBD online?

Answer: Yes. Automation Stop sells the 150-F25NBD online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 150-F25NBD?

Answer: The 150-F25NBD is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 150-F25NBD?

Answer: The 150-F25NBD is part of the SMC-Flex series.


Question: What is the Ampere ratings of the 150-F25NBD?

Answer: The Ampere ratings of the Allen Bradley-Rockwell Automation 150-F25NBD is 25 A.


Question: What amperes does the 150-F25NBD have?

Answer: The 150-F25NBD has a amperes of 25.


Question: What Brand does the 150-F25NBD have?

Answer: The 150-F25NBD has a Allen Bradley / Rockwell Automation Brand.


Question: What Bulletin number does the Allen-Bradley 150-F25NBD have?

Answer: The Allen-Bradley 150-F25NBD has a Solid-state controller Bulletin number.


Question: What is the Control voltage of the 150-F25NBD?

Answer: The Control voltage of the Rockwell-Automation 150-F25NBD is 100…240 volts alternating current (AC) (5…480 A units).


Question: What Controller type is included with the Allen Bradley/Rockwell Automation 150-F25NBD?

Answer: The Allen Bradley/Rockwell Automation 150-F25NBD has a SMC Flex Controller type.


Question: What Dimension does the Allen Bradley-Rockwell Automation 150-F25NBD have?

Answer: The Allen Bradley-Rockwell Automation 150-F25NBD has a Dimension of 321.0 mm (H) x 150.0 mm (W) x 203.0 mm (D).


Question: What Dimension - Approx Ship. Wt. does the Allen Bradley-Rockwell Automation 150-F25NBD have?

Answer: The Dimension - Approx Ship. Wt. of the 150-F25NBD is 5.7 (12.6).


Question: What Dimension - Depth does the Allen Bradley 150-F25NBD have?

Answer: The Dimension - Depth of the 150-F25NBD is 203.1 (8.00).


Question: What is the Dimension - Height of the Allen Bradley/Rockwell Automation 150-F25NBD?

Answer: The Dimension - Height of the 150-F25NBD is 307 (12.09).


Question: What is the Dimension - Width of the 150-F25NBD?

Answer: The 150-F25NBD has a Dimension - Width of 150.1 (5.91).


Question: What Enclosure type does the 150-F25NBD have?

Answer: The 150-F25NBD has a Open Enclosure type.


Question: What HP does the 150-F25NBD have?

Answer: The 150-F25NBD has a HP of 15 HP @ 460 volts alternating current (AC).


Question: What Input line voltage does the 150-F25NBD have?

Answer: The Input line voltage of the 150-F25NBD is 200…460 volts AC (alternating current), 3-Phase, 50 and 60 Hz.


Question: What is the Number of poles of the 150-F25NBD?

Answer: The 150-F25NBD has a Number of poles of 3-phase.


Question: What is the Operating frequency of the 150-F25NBD?

Answer: The Operating frequency of the Allen-Bradley 150-F25NBD is 50/60 Hz.


Question: What Operating temperature range does the 150-F25NBD have?

Answer: The Rockwell Automation 150-F25NBD has a Operating temperature range of -5…+50 °C (23…122 °F) .


Question: What is the part Number of the 150-F25NBD?

Answer: The Allen Bradley/Rockwell Automation 150-F25NBD has a part Number of 150-F25NBD.


Question: What is the Power rating of the 150-F25NBD?

Answer: The 150-F25NBD has a Power rating of 15 Hp, 11 KW.


Question: What is the Rated impulse voltage of the 150-F25NBD?

Answer: The Rated impulse voltage of the Allen Bradley 150-F25NBD is 6 kV.


Question: What is the Voltage of the 150-F25NBD?

Answer: The Allen Bradley-Rockwell Automation 150-F25NBD has a Voltage of 100...240 volts alternating current (AC) (5...480 A units).


Question: What is the Weight of the 150-F25NBD?

Answer: The Weight of the 150-F25NBD is 5.7 kg (12.5 lb).


Series information for 150-F25NBD

For additional information about 150-F25NBD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F25NBD.

Revision Part # Also Known As Availability
150-F25NBD/A 150-F25NBD Ser A, Series A, Rev A Request a Quote
150-F25NBD/B 150-F25NBD Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 150-F25N8D
  • 150-F2SNBD
  • 150-F2SN8D
  • 15O-F25NBD
  • 15O-F25N8D
  • 15O-F2SNBD
  • 15O-F2SN8D
  • 1S0-F25NBD
  • 1S0-F25N8D
  • 1S0-F2SNBD
  • 1S0-F2SN8D
  • 1SO-F25NBD
  • 1SO-F25N8D
  • 1SO-F2SNBD
  • 1SO-F2SN8D
  • I50-F25NBD
  • I50-F25N8D
  • I50-F2SNBD
  • I50-F2SN8D
  • I5O-F25NBD
  • I5O-F25N8D
  • I5O-F2SNBD
  • I5O-F2SN8D
  • IS0-F25NBD
  • IS0-F25N8D
  • IS0-F2SNBD
  • IS0-F2SN8D
  • ISO-F25NBD
  • ISO-F25N8D
  • ISO-F2SNBD
  • ISO-F2SN8D

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP