GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 150-F43NBDB

✓ In Stock

150-F43NBDB Image 1 thumbnail
150-F43NBDB Image 2 thumbnail
150-F43NBDB Image 3 thumbnail
Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 150-F43NBDB
Series: SMC-Flex

Description:

The 150-F43NBDB, which was produced by the Allen-Bradley company, is a smart motor controller within the family line of SMC Flex products. It has a control voltage of one hundred (100) to two hundred and forty (240) volts and it also has a line voltage of two hundred (200) to four hundred and eighty (480) volts AC. This device has a rated current of forty-three (43) amperes. This device has an open enclosure and is capable of performing out various modes. These modes include, soft start and stop, selectable kickstart, current limit start, etc. This device can be used with delta motors and line motors, and has a pump control function embedded into it.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number 150-F43NBDB is an SMC smart motor controller. This device, which was manufactured and produced by the Allen-Bradley company, is included in the Bulletin150 - SMC Flex Series line of products. The primary use of this device is to control different aspects of a three-phase AC motor. These controls include the ability to start and stop the device. There are also several functions that the Allen-Bradley 150-F43NBDB can perform. These functions include, but are not limited to, soft start and stop, current limit start, dual ramp start, full voltage start, etc. Additionally, embedded within this device is a pump control function. The Allen-Bradley 150-F43NBDB SMC smart motor controller can be used in tandem with different motors, such as a line motor and a delta motor.

The control voltage of this device is one hundred (100) to two hundred and forty (240) volts. This product's line voltage ranges from two hundred (200) volts to four hundred and eighty (480) volts alternating current. Additionally, the rated current of the Allen-Bradley 150-F43NBDB is forty-three (43) amperes. The frequency of this smart motor controller is fifty (50) and sixty (60) hertz. The primary interface on the Allen-Bradley 150-F43NBDB that is used for inputting data and information is a keypad. This keypad is used to configure, as well as operate, any machine connected to the Allen-Bradley 150-F43NBDB. This device has a liquid crystal display, or LCD. This Allen-Bradley product is capable of being used with multiple motors. These motors include the standard squirrel-cage induction motor and/or a Wye-Delta Six-Lead Motor. The enclosure on this device is one of an open-type design and it supports panel mounting. When storing this device, an ambient temperature range must be maintained between -20 and +75 °C (-4 and +167 °F). Additionally, the internal temperature of the Allen-Bradley 150-F43NBDB enclosure must maintain a temperature range of 0 to 50 °C.

Technical Specifications

MPN 150-F43NBDB
Manufacturer Allen Bradley / Rockwell Automation
Series SMC - Flex Controller
Dimension - Width 150.1 (5.91)
Dimension - Height 307 (12.09)
Dimension - Depth 203.1 (8.00)
Dimension - Approx Ship. Wt. 5.7 (12.6)
Amps 43
HP 30 HP @ 460V AC
Enclosure Type Open
Input Line Voltage 200...460V AC, 3-Phase, 50 and 60 Hz
Voltage 100...240V AC (5...480 A units)
Options Pump Control
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the 150-F43NBDB?

Answer: Yes. We offer repairs for the 150-F43NBDB and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 150-F43NBDB?

Answer: If you buy the 150-F43NBDB through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 150-F43NBDB online?

Answer: Yes. Automation Stop sells the 150-F43NBDB online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 150-F43NBDB?

Answer: The 150-F43NBDB is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 150-F43NBDB?

Answer: The 150-F43NBDB is part of the SMC-Flex series.


Question: What is the amperes of the Rockwell-Automation 150-F43NBDB?

Answer: The amperes of the 150-F43NBDB is 43.


Question: What Dimension - Approx Ship. Wt. does the 150-F43NBDB have?

Answer: The Dimension - Approx Ship. Wt. of the 150-F43NBDB is 5.7 (12.6).


Question: What is the Dimension - Depth of the 150-F43NBDB?

Answer: The Dimension - Depth of the 150-F43NBDB is 203.1 (8.00).


Question: What Dimension - Height does the 150-F43NBDB have?

Answer: The Rockwell Automation 150-F43NBDB has a Dimension - Height of 307 (12.09).


Question: What Dimension - Width does the Rockwell-Automation 150-F43NBDB have?

Answer: The Rockwell-Automation 150-F43NBDB has a Dimension - Width of 150.1 (5.91).


Question: What Enclosure Type is included with the 150-F43NBDB?

Answer: The Rockwell-Automation 150-F43NBDB has a Open Enclosure Type.


Question: What is the HP of the 150-F43NBDB?

Answer: The Allen-Bradley 150-F43NBDB has a HP of 30 HP @ 460 volts AC (alternating current).


Question: What is the Input Line Voltage of the 150-F43NBDB?

Answer: The Input Line Voltage of the Allen Bradley/Rockwell Automation 150-F43NBDB is 200...460 volts AC (alternating current), 3-Phase, 50 and 60 Hz.


Question: What kind of Options does the Allen Bradley Automation 150-F43NBDB have?

Answer: The 150-F43NBDB includes Pump Control for its Options.


Question: What Voltage does the 150-F43NBDB have?

Answer: The Voltage of the 150-F43NBDB is 100...240 volts AC (alternating current) (5...480 A units).


Series information for 150-F43NBDB

For additional information about 150-F43NBDB check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 150-F43NBDB.

Revision Part # Also Known As Availability
150-F43NBDB/A 150-F43NBDB Ser A, Series A, Rev A Request a Quote
150-F43NBDB/B 150-F43NBDB Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 150-F43NBD8
  • 150-F43N8DB
  • 150-F43N8D8
  • 15O-F43NBDB
  • 15O-F43NBD8
  • 15O-F43N8DB
  • 15O-F43N8D8
  • 1S0-F43NBDB
  • 1S0-F43NBD8
  • 1S0-F43N8DB
  • 1S0-F43N8D8
  • 1SO-F43NBDB
  • 1SO-F43NBD8
  • 1SO-F43N8DB
  • 1SO-F43N8D8
  • I50-F43NBDB
  • I50-F43NBD8
  • I50-F43N8DB
  • I50-F43N8D8
  • I5O-F43NBDB
  • I5O-F43NBD8
  • I5O-F43N8DB
  • I5O-F43N8D8
  • IS0-F43NBDB
  • IS0-F43NBD8
  • IS0-F43N8DB
  • IS0-F43N8D8
  • ISO-F43NBDB
  • ISO-F43NBD8
  • ISO-F43N8DB
  • ISO-F43N8D8

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP