GE / IP FANUC Series 90/30 In Stock
sales@automationstop.com
Call Now
(919) 867-5794
Mon-Fri 8AM-5PM EST
1326DS-L4D-FL
✓ In Stock
| Manufacturer: | Allen Bradley - Miscellaneous |
| Product Type: | Drive |
| Part Number: | 1326DS-L4D-FL |
| Series: | misc |
Description:
Designed and manufactured by Allen Bradley / Rockwell Automation, part number 1326DS-L4D-FL is a servo motor. It is a part of the Bulletin 1386DC series of products. This servo motor operates on a direct current (DC) voltage. This is an open-type servo motor with a diameter that measures 4.0 inches, or 101.6 millimeters. It has a magnet stack length of four (4) stacks. The rated speed of this device is 2500 rpm. The torque range of this device is 0.35 to 4.63 Newton-meters.
Key Features:
- comes discontinued/obsolete
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Product number 1326DS-L4D-FL is a servo motor that belongs to the Bulletin 1386DS series of products. This servo motor, which was designed and produced by Allen Bradley / Rockwell Automation, operates via a DC (direct current) voltage. The design architecture of this unit is extremely user friendly. This servo motor is not equipped with either a 24-volts DC brake or a 1000-line encoder. The Allen Bradley 1326DS-L4D-FL servo motor is compatible with connector kits, as well as other accessories that are not normally included with it. The frame of this servo motor is that of an open type. The diameter of this Allen Bradley servo motor measures 4.0 inches, or the equivalent of 101.6 millimeters. Additionally, this servo motor has a stack length of 4 stacks. This Allen Bradley servo motor has a speed rated at 2500 rpm (revolutions per minute). The supported torque range of this servo motor is 0.35 to 4.63 Newton-meters (Nm), or the equivalent of 3.1 to 41 pounds on an inch (lb-in). This device is capable of being mounted via a flange mount. This servo motor provides an increase noise immunity. This product operates via a frequency range of 50 to 60 hertz. This device has a quiet operation due to switching at 20 kilohertz (kHz). Due to the improved thermal characteristics of the power transistor of this device, the Allen Bradley 1326DS-L4D-FL has a cooler operation. This product also has modules that are interchangeable, as well as advanced diagnostics features. This product has been discontinued by Allen Bradley / Rockwell Automation.
FAQ
Question: Does Automation Stop offer repairs on the 1326DS-L4D-FL?
Answer: Yes. We offer repairs for the 1326DS-L4D-FL and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1326DS-L4D-FL?
Answer: If you buy the 1326DS-L4D-FL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326DS-L4D-FL online?
Answer: Yes. Automation Stop sells the 1326DS-L4D-FL online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326DS-L4D-FL?
Answer: The 1326DS-L4D-FL is made by Allen Bradley - Miscellaneous.
Series information for 1326DS-L4D-FL
For additional information about 1326DS-L4D-FL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326DS-L4D-FL.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| 1326DS-L4D-FL/A | 1326DS-L4D-FL Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
- 1326D5-L4D-FL
- 132GDS-L4D-FL
- 132GD5-L4D-FL
- I326DS-L4D-FL
- I326D5-L4D-FL
- I32GDS-L4D-FL
- I32GD5-L4D-FL
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
