GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | MVI46-AFC |
Series: | SLC 500 |
Description:
Designed and manufactured by ProSoft Technology, product number MVI46-AFC is a Flow Computer Module. This module is compatible with SLC products and backplanes. This device supports 8 meter channels. This product has several LED status indicators. The backplane load current rating of this device is 800 milliamperes at 5 volts from the backplane. This device has a recommended operating temperature ranging from 0 to 60 degrees Celsius. Additionally, the recommended storage temperature for this module ranges from -40 to 85 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MVI46-AFC was designed and manufactured by ProSoft Technology. This product is classified as a Flow Computer Module. This module is compatible with SLC backplanes and devices. This module supports eight (8) meter channels. Additionally, this module is equipped with multiple LED, or light emitting diode, indicators. These LEDs are used to indicate the statuses of the module, backplane transfer, application, serial activity, and errors.
The ProSoft TechnologyMVI46-AFC Liquid and Gas Flow Computer Module is compatible with a Bulletin 1746 backplane. This module only takes up a single slot. It is recognized as an I/O (input / output) module. this device has access to processor memory for data transfer between a processor and the module using M0/M1 files. When transferring data between the processor and the module, ladder logic is utilized. This module has a backplane current load rated as 800 milliamperes at 5 volts from the backplane.
When operating the ProSoft Technology Flow Computer Module, the temperature of the surrounding area should range from 0 to 60 degrees Celsius. Also, when this module is being stored, the ambient temperature should range from -40 to 85 degrees Celsius. Furthermore, the relative humidity levels suitable for this module range from 5% to 95% and should be non-condensing. This Flow Computer Module can withstand a vibration rated up to 5 G from a frequency of 10150 hertz. This ProSoft Technology device can also withstand an operational shock rated up to 30 G, as well as a non-operational shock rated up to 50 G.
Question: Does Automation Stop offer repairs on the MVI46-AFC?
Answer: Yes. We offer repairs for the MVI46-AFC and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and MVI46-AFC?
Answer: If you buy the MVI46-AFC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MVI46-AFC online?
Answer: Yes. Automation Stop sells the MVI46-AFC online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MVI46-AFC?
Answer: The MVI46-AFC is made by Allen Bradley - Miscellaneous.
Question: What type of product is the MVI46-AFC?
Answer: The MVI46-AFC is part of the SLC 500 series.
For additional information about MVI46-AFC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MVI46-AFC.
Revision Part # | Also Known As | Availability |
---|---|---|
MVI46-AFC/A | MVI46-AFC Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.