GE / IP FANUC Series 90/30 In Stock
sales@automationstop.com
Call Now
(919) 867-5794
Mon-Fri 8AM-5PM EST
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC670MDD441 |
| Series: | Field Control |
| UPC: | 799705793088 |
Description:
The GE Fanuc designed and produced IC670MDD441 mixed I/O module has ten inputs and six outputs. It runs on a direct current. It has Short Circuit and Electronic Overcurrent Protection. It has Discrete Type I/O, as well as Mixed Type I/O, and they are connected through a shared line. The module operates between 15 and 30 Volts DC in its on-state state and 0 to 5 Volts DC in its off-state state.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC670MDD441 is an I/O module that has a total of 16 inputs and outputs. This device, which was manufactured by GE Fanuc, is part of the Field Control I/O Module series of products. This device has six (6) outputs and ten (10) inputs. The IC670MDD441 is a direct current (DC) module that runs at 24 volts DC. The input circuits and output circuits of this device are all discrete I/O. Therefore, these circuits all communicate with one another through a shared line. The outputs of this device are equipped with short circuit protection, as well as electronic over current protection. These outputs are capable of sending out an alert in the event a short circuit or over current occurs. Upon the occurrence of a defect, the output that is suffering the fault will be turned off, and the error will be communicated to the system's BIU, which stands for Bus Interface Unit.
The IC670MDD441 is powered by the system's BIU, which also serves as the system's power supply. However, the switches of the system, require an external DC source to power on. When the matching inputs of this device are switched on, the green LEDs (light emitting diodes), that are located on the module's side, will illuminate. The bi-color LEDs light up green when their respective outputs are switched on, and when they are experiencing problems, they will glow orange. The "PWR" LED illuminates green when this device is powered by logic and user power. When this GE Fanuc I/O module is powered off, the "PWR" LED is turned off as well.
FAQ
Question: Does Automation Stop offer repairs on the IC670MDD441?
Answer: Yes. We offer repairs for the IC670MDD441 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC670MDD441?
Answer: If you buy the IC670MDD441 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC670MDD441 online?
Answer: Yes. Automation Stop sells the IC670MDD441 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC670MDD441?
Answer: The IC670MDD441 is made by Emerson - GE Fanuc.
Series information for IC670MDD441
For additional information about IC670MDD441 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670MDD441.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC670MDD441J | IC670MDD441 Series J, Rev J | Request a Quote |
Common Misspellings:
- IC670MDD44I
- IC67OMDD441
- IC67OMDD44I
- ICG70MDD441
- ICG70MDD44I
- ICG7OMDD441
- ICG7OMDD44I
- 1C670MDD441
- 1C670MDD44I
- 1C67OMDD441
- 1C67OMDD44I
- 1CG70MDD441
- 1CG70MDD44I
- 1CG7OMDD441
- 1CG7OMDD44I
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
