GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC660BBA104

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC660BBA104
Series: Genius I/O
UPC: 799705793507

Description:

The GE Fanuc IC660BBA104 Genius I/O Block features 115 volts AC/125 volts DC Analog Current Source, as well as 4 inputs and 2 outputs. This module has four separate current inputs ranging from 4 to 20 milliamperes. Two 4-to-20 milliampere current loops are powered and controlled by the module's two output channels. Terminals 11-12 and 14-15 are used to connect to outputs. The bus module will connect to terminals numbered 9-10.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC660BBA104 is a current-source analog block that provides two (2) output and four (4) input channels which supports either AC or DC power supply with an input accuracy of 0.1% and output accuracy of 0.15% at 25 degrees Celsius (77 degrees Fahrenheit). The IC660BBA104 supports an input voltage of either 115 Volts AC or 125 Volts DC. The IC660BBA104 supports an input voltage range from 98 Volts AC to 132 Volts AC at a frequency range from 47 to 63 Hertz. The IC660BBA104 delivers an output current range from 4 milliamperes to 20 milliamperes and input current range from 4 milliamperes to 20 milliamperes. The IC660BBA104 supports both right-facing up and down installation employing either two bolt holes or screw.

The IC660BBA104 offers input low and high alarm detection and reports an internal fault. The IC660BBA104 can be installed in an enclosure to protect the internal circuitry by leaving an amount space of 5.08 centimeters (2 inches) from all orientations for heat dissipation. The IC660BBA104 offers an output resolution of 6 microamperes and an input resolution of 1 microampere. The IC660BBA104 detects and offers input and output over range, under range, and feedback diagnostics. The IC660BBA104 provides continuous electrical isolation of 1500 volts AC/DC between blocks for one minute. The IC660BBA104 dissipates an electrical power of 12 watts and has LED indicators for I/O block. The IC660BBA104 can be configured through the software and weighs approximately 1.8 kilograms (4 pounds) while shipping; it operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

The GE Fanuc IC660BBA104 Genius I/O Block is part of the Series 90-30 PLCs. The required voltage power this module is one hundred and fifteen (115) volts alternating current (AC) or one hundred and twenty-five (125) volts direct current (DC), and it is classified as an AMM. This module features a total of four (4) inputs, as well as two (2) outputs, with an Input/Output range of four (4) milliamperes to twenty (20) milliamperes, providing the system with numerous diagnostics. Zero-point-one percent (0.1%) of precision can be achieved for the inputs due to the circuits being separated.

Due to the block and circuits being powered by one single input, users do not need external power to process signals. Upon a signal entering a circuit, it gets converted to engineering units by use of linear scaling. Eight (8) bytes of data are sent per scan, with the engineering data included. The output data is delivered in four (4) bytes. The block connects to a Bus Module and features an output that is supported by PCIM, Genius Bus Controllers, and QBIM modules.

To program the IC660BBA104 Genius I/O Block, you must have a Hand-held monitor (Ed. 3.7 or later). Programming requires Logicmaster 6 version 4.02 or later. CPUs that are compatible with this I/O block are rev. 105 or later for Series Six PLCs and rev. 3.0 or later for series 5 PLCs. The block can be configured to monitor input alarms, hold the last output state or default, and receive output feedback.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 115 VAC/125 VDC, 4 input/2 output current-source analogue block
Part Number IC660BBA104
Rated Voltage 115 VAC / 125 VDC
Number of Points 6 (4 inputs and 2 outputs)
Input Voltage Range 98 - 132 VAC / 105-145 VDC
Output Range 4 mA to 20 mA
Input Range 4 mA to 20 mA
Output Update Frequency 6 to 8 ms typical
Output Resolution 6 μA
Block to Block Isolation 1500 Volts for one minute
Heat Dissipation 12 Watts
Output Accuracy at 25° C 0.15% of Full Scale Reading
Frequency AC: 47-63 Hz, DC: 10% maximum ripple
Size (height x width x depth) 8.83” (22.44 cm) x 3.34” (8.48 cm) x 3.91” (9.93 cm)
Operating Temperature 0°C to 60°C (32°F to 140°F)
Weight 1.8 Kg (4 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC660BBA104?

Answer: Yes. We offer repairs for the IC660BBA104 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC660BBA104?

Answer: If you buy the IC660BBA104 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC660BBA104 online?

Answer: Yes. Automation Stop sells the IC660BBA104 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC660BBA104?

Answer: The IC660BBA104 is made by Emerson - GE Fanuc.


Question: What is the Block to Block Isolation of the IC660BBA104?

Answer: The IC660BBA104 has a Block to Block Isolation of 1500 Volts for one minute.


Question: What Brand does the IC660BBA104 have?

Answer: The IC660BBA104 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Frequency does the IC660BBA104 have?

Answer: The Frequency of the Allen Bradley-Rockwell Automation IC660BBA104 is alternating current (AC): 47-63 Hz, direct current: 10% maximum ripple.


Question: What Heat Dissipation does the Rockwell-Automation IC660BBA104 have?

Answer: The Heat Dissipation of the Rockwell-Automation IC660BBA104 is 12 Watts.


Question: What is the Input Range of the Allen Bradley-Rockwell Automation IC660BBA104?

Answer: The Allen Bradley-Rockwell Automation IC660BBA104 has a Input Range of 4 mA to 20 mA.


Question: What Input Voltage Range does the IC660BBA104 have?

Answer: The Input Voltage Range of the IC660BBA104 is 98 - 132 VAC (voltage alternating current) / 105-145 VDC.


Question: What is the Number of Points of the Allen Bradley Automation IC660BBA104?

Answer: The Allen Bradley Automation IC660BBA104 has a Number of Points of 6 (4 inputs and 2 outputs).


Question: What is the Operating Temperature of the Rockwell Automation IC660BBA104?

Answer: The Operating Temperature of the IC660BBA104 is 0°C to 60°C (32°F to 140°F).


Question: What is the Output Accuracy at 25° C of the Rockwell-Automation IC660BBA104?

Answer: The Output Accuracy at 25° C of the Rockwell-Automation IC660BBA104 is 0.15% of Full Scale Reading.


Question: What is the Output Range of the Allen Bradley IC660BBA104?

Answer: The IC660BBA104 has a Output Range of 4 mA to 20 mA.


Question: What is the Output Resolution of the IC660BBA104?

Answer: The IC660BBA104 has a Output Resolution of 6 μA.


Question: What Output Update Frequency does the Rockwell Automation IC660BBA104 have?

Answer: The Output Update Frequency of the IC660BBA104 is 6 to 8 ms typical.


Question: What is the unit Number of the IC660BBA104?

Answer: The part Number of the IC660BBA104 is IC660BBA104.


Question: What is the Rated Voltage of the IC660BBA104?

Answer: The Rated Voltage of the IC660BBA104 is 115 VAC (voltage alternating current) / 125 VDC.


Question: What is the Size (height x width x depth) of the IC660BBA104?

Answer: The Size (height x width x depth) of the Allen Bradley/Rockwell Automation IC660BBA104 is 8.83” (22.44 cm) x 3.34” (8.48 cm) x 3.91” (9.93 cm).


Question: What is the Weight of the IC660BBA104?

Answer: The Weight of the Allen Bradley IC660BBA104 is 1.8 Kg (4 lb).


Series information for IC660BBA104

For additional information about IC660BBA104 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660BBA104.

Revision Part # Also Known As Availability
IC660BBA104C IC660BBA104 Series C, Rev C Request a Quote
IC660BBA104-C-K IC660BBA104 Series C-K, Rev C-K Request a Quote
IC660BBA104-D-K IC660BBA104 Series D-K, Rev D-K Request a Quote
IC660BBA104E IC660BBA104 Series E, Rev E Request a Quote
IC660BBA104K IC660BBA104 Series K, Rev K Request a Quote
IC660BBA104L IC660BBA104 Series L, Rev L Request a Quote
IC660BBA104N IC660BBA104 Series N, Rev N Request a Quote
IC660BBA104-N1 IC660BBA104 Series N1, Rev N1 Request a Quote

Common Misspellings:

  • IC660BBA1O4
  • IC660BBAI04
  • IC660BBAIO4
  • IC660B8A104
  • IC660B8A1O4
  • IC660B8AI04
  • IC660B8AIO4
  • IC6608BA104
  • IC6608BA1O4
  • IC6608BAI04
  • IC6608BAIO4
  • IC66088A104
  • IC66088A1O4
  • IC66088AI04
  • IC66088AIO4
  • IC66OBBA104
  • IC66OBBA1O4
  • IC66OBBAI04
  • IC66OBBAIO4
  • IC66OB8A104
  • IC66OB8A1O4
  • IC66OB8AI04
  • IC66OB8AIO4
  • IC66O8BA104
  • IC66O8BA1O4
  • IC66O8BAI04
  • IC66O8BAIO4
  • IC66O88A104
  • IC66O88A1O4
  • IC66O88AI04
  • IC66O88AIO4
  • IC6G0BBA104
  • IC6G0BBA1O4
  • IC6G0BBAI04
  • IC6G0BBAIO4
  • IC6G0B8A104
  • IC6G0B8A1O4
  • IC6G0B8AI04
  • IC6G0B8AIO4
  • IC6G08BA104
  • IC6G08BA1O4
  • IC6G08BAI04
  • IC6G08BAIO4
  • IC6G088A104
  • IC6G088A1O4
  • IC6G088AI04
  • IC6G088AIO4
  • IC6GOBBA104
  • IC6GOBBA1O4
  • IC6GOBBAI04
  • IC6GOBBAIO4
  • IC6GOB8A104
  • IC6GOB8A1O4
  • IC6GOB8AI04
  • IC6GOB8AIO4
  • IC6GO8BA104
  • IC6GO8BA1O4
  • IC6GO8BAI04
  • IC6GO8BAIO4
  • IC6GO88A104
  • IC6GO88A1O4
  • IC6GO88AI04
  • IC6GO88AIO4
  • ICG60BBA104
  • ICG60BBA1O4
  • ICG60BBAI04
  • ICG60BBAIO4
  • ICG60B8A104
  • ICG60B8A1O4
  • ICG60B8AI04
  • ICG60B8AIO4
  • ICG608BA104
  • ICG608BA1O4
  • ICG608BAI04
  • ICG608BAIO4
  • ICG6088A104
  • ICG6088A1O4
  • ICG6088AI04
  • ICG6088AIO4
  • ICG6OBBA104
  • ICG6OBBA1O4
  • ICG6OBBAI04
  • ICG6OBBAIO4
  • ICG6OB8A104
  • ICG6OB8A1O4
  • ICG6OB8AI04
  • ICG6OB8AIO4
  • ICG6O8BA104
  • ICG6O8BA1O4
  • ICG6O8BAI04
  • ICG6O8BAIO4
  • ICG6O88A104
  • ICG6O88A1O4
  • ICG6O88AI04
  • ICG6O88AIO4
  • ICGG0BBA104
  • ICGG0BBA1O4
  • ICGG0BBAI04
  • ICGG0BBAIO4
  • ICGG0B8A104

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP