GE / IP FANUC Series 90/30 In Stock
sales@automationstop.com
Call Now
(919) 867-5794
Mon-Fri 8AM-5PM EST
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC694APU305 |
| Series: | RX3i PacSystem |
| UPC: | 799705802353 |
Description:
Designed and manufactured by Emerson - GE Fanuc, part number IC694APU305 is a pulse I/O processing module. This device belongs to the RX3i PacSystem series of products. This device has a power supply voltage of 5 volts DC, which it receives from the backplane. The maximum input voltage of this device is +30 volts DC. The power supply current rating of this product is 360 milliamperes, plus 10 milliamperes per faceplate output.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number IC694APU305 is a pulse I/O processing module that was designed and manufactured by Emerson - GE Fanuc. The RX3i PacSystem series features this product. Its input supply voltage is 5 volts DC, which it receives from the backplane. Besides that, its power supply current rating at 5 volts DC is 360 milliamperes, plus 10 milliamperes per output on this device. Also, there is no limit for the number of modules per RX3i system. This device has positive logic inputs that are optically isolated. The outputs of this device are also positive logic and are optically isolated. The maximum supply voltage range of this I/O processing module is 30 volts DC. Additionally, the parameters for the fuse output includes 5 amperes common to all outputs. The field I/O to logic isolation has the following power requirements: 1500 volts at peak for 1 second for the maximum state and 30 volts AC/DC for the steady state. Because the number of modules that can be connected to a single RX3i system is unlimited, any number of pulse signals that need to be monitored can be handled simply by adding more modules. In this case, the voltage required to power the circuits connected to the input point can be derived from the input point itself. Aside from that, the wiring connecting the inputs must always be shielded to eliminate possible noise and interference, and it must be no longer than 30 m in length. In brief, this device combines usability and applicability in one package.
FAQ
Question: Does Automation Stop offer repairs on the IC694APU305?
Answer: Yes. We offer repairs for the IC694APU305 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC694APU305?
Answer: If you buy the IC694APU305 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC694APU305 online?
Answer: Yes. Automation Stop sells the IC694APU305 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC694APU305?
Answer: The IC694APU305 is made by Emerson - GE Fanuc.
Series information for IC694APU305
For additional information about IC694APU305 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC694APU305.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC694APU305B | IC694APU305 Series B, Rev B | Request a Quote |
Common Misspellings:
- IC694APU30S
- IC694APU3O5
- IC694APU3OS
- ICG94APU305
- ICG94APU30S
- ICG94APU3O5
- ICG94APU3OS
- 1C694APU305
- 1C694APU30S
- 1C694APU3O5
- 1C694APU3OS
- 1CG94APU305
- 1CG94APU30S
- 1CG94APU3O5
- 1CG94APU3OS
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
