GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693APU301

✓ In Stock

IC693APU301 Image 1 thumbnail
IC693APU301 Image 2 thumbnail
IC693APU301 Image 3 thumbnail
IC693APU301 Image 4 thumbnail
IC693APU301 Image 5 thumbnail
IC693APU301 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693APU301
Series: Series 90-30
UPC: 799705792883

Description:

The GE Fanuc Emerson IC693APU301 is a single axis positioning module (APM) that offers the possibility to mix and combine high-efficiency monitoring with PLC logic functions solver in a single embedded system. This intelligent motion controller can be programmed in as either a standard or follower mode. The IC693APU301 can be mounted on remote or expansion baseplate, baseplate or any of the Series 90-30 CPU, depending on the applications. Three (3) IC693APU301 APM modules can be added with an embedded CPU and eight (8) IC693APU301 APM modules can be used with a modular CPU.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693APU301 is a single axis positioning module (APM) that offers the possibility to mix and combine high-efficiency monitoring with PLC logic functions solver in a single embedded system. This intelligent motion controller can be programmed in as either a standard or follower mode. The IC693APU301 can be mounted on remote or expansion baseplate, baseplate or any of the Series 90-30 CPU, depending on the applications. Three (3) IC693APU301 APM modules can be added with an embedded CPU and eight (8) IC693APU301 APM modules can be used with a modular CPU. The IC693APU301 supports many motion programs with a maximum of ten (10) programs which can be integrated and saved in this module. The IC693APU301 communicates automatically with data tables through the PLC. The IC693APU301 includes two high-density 24-pin connectors which are labelled “A” and “B” on the front panel for servo links.

The IC693APU301 “A” connector includes connections dedicated to Axis 1 and the “B” connector includes general-purpose connections for 1-axis and Axis 2 APM. APM connectors are connected using a short cable with a 24-pin I/O connector to a 25-pin D-type terminal block. The IC693APU301 has five (5) LED indicators on the faceplate to show the current status of this APM. The IC693APU301 consumes a current rating of 800 milliamperes at a baseplate voltage rating of 5 Volts DC. The IC693APU301 is easy to use and a fully programmable module through either the VersaPro or the Logicmaster 90-30 software. The IC693APU301 in follower mode offers high-efficiency ”electronic gearing” for continuous master/slave user applications. The IC693APU301 in standard mode mixes high-efficiency monitoring with PLC logic functions solver in a single embedded system.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Motion Mate single-axis positioning module (APM) for Series 90-30 PLCs
Part Number IC693APU301
Module Type Intelligent motion control module
Load Requirement 800 mA at +5 VDC
Mode of Functionality Standard or follower mode
Mounting Options Remote or expansion baseplate, baseplate or any of the Series 90-30 CPU
Number of APM with CPUs Three (3) with an embedded CPU and eight (8) with a modular CPU
Status LEDs 5
Number of Connectors 2
Type of Connectors 24-pin high-density connectors
Voltage Rating 5 VDC
Connection Type Short cable with a 25-pin D-type terminal block
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC693APU301?

Answer: Yes. We offer repairs for the IC693APU301 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693APU301?

Answer: If you buy the IC693APU301 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693APU301 online?

Answer: Yes. Automation Stop sells the IC693APU301 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693APU301?

Answer: The IC693APU301 is made by Emerson - GE Fanuc.


Question: What Brand does the IC693APU301 have?

Answer: The Allen Bradley-Rockwell Automation IC693APU301 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Connection Type does the IC693APU301 have?

Answer: The Allen Bradley Automation IC693APU301 has a Connection Type of Short cable with a 25-pin D-type terminal block.


Question: What Load Requirement does the Rockwell-Automation IC693APU301 have?

Answer: The IC693APU301 has a Load Requirement of 800 mA at +5 VDC.


Question: What Mode of Functionality is included with the Allen-Bradley IC693APU301?

Answer: The Allen-Bradley IC693APU301 has a Standard or follower mode Mode of Functionality.


Question: What Module Type is included with the IC693APU301?

Answer: The Allen Bradley/Rockwell Automation IC693APU301 has a Intelligent motion control module Module Type.


Question: What is the Mounting Options of the IC693APU301?

Answer: The IC693APU301 has a Mounting Options of Remote or expansion baseplate, baseplate or any of the Series 90-30 central processing unit (CPU).


Question: What Number of APM with CPUs does the IC693APU301 have?

Answer: The Allen Bradley/Rockwell Automation IC693APU301 has a Number of APM with CPUs of Three (3) with an embedded central processing unit (CPU) and eight (8) with a modular central processing unit (CPU).


Question: What Number of Connectors does the IC693APU301 have?

Answer: The Allen-Bradley IC693APU301 has a Number of Connectors of 2.


Question: What is the part Number of the IC693APU301?

Answer: The Allen Bradley/Rockwell Automation IC693APU301 has a unit Number of IC693APU301.


Question: What is the Status LEDs of the IC693APU301?

Answer: The Allen Bradley Automation IC693APU301 has a Status LEDs of 5.


Question: What is the Type of Connectors of the IC693APU301?

Answer: The Type of Connectors of the IC693APU301 is 24-pin high-density connectors.


Question: What is the Voltage Rating of the IC693APU301?

Answer: The Voltage Rating of the IC693APU301 is 5 VDC.


Series information for IC693APU301

For additional information about IC693APU301 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693APU301.

Revision Part # Also Known As Availability
IC693APU301R IC693APU301 Series R, Rev R Request a Quote

Common Misspellings:

  • IC693APU30I
  • IC693APU3O1
  • IC693APU3OI
  • ICG93APU301
  • ICG93APU30I
  • ICG93APU3O1
  • ICG93APU3OI
  • 1C693APU301
  • 1C693APU30I
  • 1C693APU3O1
  • 1C693APU3OI
  • 1CG93APU301
  • 1CG93APU30I
  • 1CG93APU3O1
  • 1CG93APU3OI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP