GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693CHS392

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693CHS392
Series: Series 90-30
UPC: 490410401281

Description:

The GE Fanuc Emerson IC693CHS392 is a 10-slot expansion baseplate that contains female twenty-five (25) D-type pin connectors which are installed at the right side end to link other baseplates. The IC693CHS392 can be employed either as local chassis for PLCs or to extend I/O to other places which shouldn?t be more than 15 meters (50 feet). This expansion permits operators adding I/O modules of the PLC and improving the control using a single processor. The IC693CHS392 can be used for PLC systems with I/O which are near to the local chassis.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693CHS392 is a 10-slot expansion baseplate that contains female twenty-five (25) D-type pin connectors which are installed at the right side end to link other baseplates. The IC693CHS392 can be employed either as local chassis for PLCs or to extend I/O to other places which shouldn’t be more than 15 meters (50 feet). This expansion permits operators adding I/O of the PLC and improving the control using a single processor. The IC693CHS392 can be used for PLC systems with I/O which are near to the local chassis. The IC693CHS392 by GE Fanuc Emerson consumes a current rating of 150 milliamperes at a baseplate voltage rating of 5 Volts DC. It has a width of 44.30 centimeters (17.44 inches), a height of 13 centimeters (5.12 inches), and a depth of 14.2 centimeters (5.59 inches).

The IC693CHS392 includes ten (10) slots which are serially labelled from one (1) to ten (10). The IC693CHS392 can be connected to the CPU’s baseplate through a short parallel wire which allows transferring parallel data between them. The IC693CHS392 should be supplied by the power supply of the baseplate. This IC693CH392 local I/O expansion includes a rack number selection DIP switch that should be grounded and connected to a common ground. The IC693CHS392 can be employed in many industrial applications to extend I/O modules from the baseplate. The IC693CHS392 is compatible with all I/O modules and also remote baseplates. The IC693CHS392 operates at zer0 (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 25-pin female D-type, 10-slot expansion baseplate for series 90-30 PLCs
Part Number IC693CHS392
Module Type Expansion I/O Base
Load Requirement 150 mA at +5 VDC
Baseplate Option Expansion
Distance Up to 50 feet
Number of Slots 10
Dimensions 17.44 x 5.12 x 5.59 inches (W x H x D)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC693CHS392?

Answer: Yes. We offer repairs for the IC693CHS392 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CHS392?

Answer: If you buy the IC693CHS392 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693CHS392 online?

Answer: Yes. Automation Stop sells the IC693CHS392 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693CHS392?

Answer: The IC693CHS392 is made by Emerson - GE Fanuc.


Question: What Baseplate Option does the IC693CHS392 have?

Answer: The IC693CHS392 has a Expansion Baseplate Option.


Question: What Brand does the Allen Bradley IC693CHS392 have?

Answer: The Allen Bradley IC693CHS392 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Dimensions of the IC693CHS392?

Answer: The Allen-Bradley IC693CHS392 has a Dimensions of 17.44 x 5.12 x 5.59 inch (W x H x D).


Question: What is the Distance of the Allen Bradley-Rockwell Automation IC693CHS392?

Answer: The IC693CHS392 has a Distance of Up to 50 feet.


Question: What is the Load Requirement of the IC693CHS392?

Answer: The Rockwell-Automation IC693CHS392 has a Load Requirement of 150 mA at +5 VDC.


Question: What Module Type is included with the IC693CHS392?

Answer: The IC693CHS392 has a Expansion input/output Base Module Type.


Question: What is the Number of Slots of the Rockwell Automation IC693CHS392?

Answer: The Number of Slots of the IC693CHS392 is 10.


Question: What is the unit Number of the IC693CHS392?

Answer: The IC693CHS392 has a part Number of IC693CHS392.


Series information for IC693CHS392

For additional information about IC693CHS392 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CHS392.

Revision Part # Also Known As Availability
IC693CHS392A IC693CHS392 Series A, Rev A Request a Quote
IC693CHS392C IC693CHS392 Series C, Rev C Request a Quote
IC693CHS392D IC693CHS392 Series D, Rev D Request a Quote
IC693CHS392E IC693CHS392 Series E, Rev E Request a Quote
IC693CHS392F IC693CHS392 Series F, Rev F Request a Quote
IC693CHS392G IC693CHS392 Series G, Rev G Request a Quote
IC693CHS392H IC693CHS392 Series H, Rev H Request a Quote
IC693CHS392J IC693CHS392 Series J, Rev J Request a Quote
IC693CHS392K IC693CHS392 Series K, Rev K Request a Quote

Common Misspellings:

  • IC693CH5392
  • ICG93CHS392
  • ICG93CH5392
  • 1C693CHS392
  • 1C693CH5392
  • 1CG93CHS392
  • 1CG93CH5392

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP