GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC693CHS398

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693CHS398
Series: Series 90-30
UPC: 777362722641

Description:

The GE Fanuc Emerson IC693CHS398 is a 5-slot expansion baseplate that contains a female twenty-five D-type pin connector which is installed at the right side end to link other baseplates. This baseplate can be employed either as local chassis for PLCs or to extend I/O to other places that shouldn?t be more than 15 meters (50 feet). This expansion permits operators to add I/O modules of the PLC and improving the control using a single processor. The IC693CHS398 can be used for PLC systems with I/O which are near to the local chassis.


Key Features:

  • operates at a voltage of 5 volts dc
  • has been discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693CHS398 is a 5-slot expansion baseplate that contains a female twenty-five D-type pin connector that is installed at the right side end to link other baseplates. This baseplate is employed either as local chassis for PLCs or to extend I/O to other places that shouldn’t be more than 15 meters (50 feet). This expansion permits operators to add I/O of the PLC and improving the control using a single processor. The expansion baseplate can be used for PLC systems with I/O that are near to the local chassis. The device consumes a current of 170 milliamperes at a baseplate voltage of 5 volts DC. The expansion baseplate has a width of 26.49 centimeters (10.43 inches), a height of 13 centimeters (5.12 inches), and a depth of 14.2 centimeters (5.59 inches).

The IC693CHS398 includes 5 slots that are serially labeled from 1 to 5. This unit can be connected to the CPU’s baseplate through a short parallel wire that allows transferring parallel data between them. The device should be supplied by the power supply of the baseplate. This local I/O expansion baseplate includes a rack number selection DIP switch that should be grounded and linked to a common ground. The IC693CHS398 is employed in many industrial applications to extend I/O modules of the baseplate and is compatible with all I/O modules and also remote baseplates. The IC693CHS398 expansion baseplate operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 90-30
Part Number IC693CHS398
Description 5-slot expansion baseplate
Load requirement 170 mA at +5 VDC
Baseplate option Expansion
Distance Up to 50 feet
Number of slots 5
Dimensions 10.43 x 5.12 x 5.59 in. (W x H x D)
Voltage 5 Volts DC
Compatibility 90-30 PLCs
Maximum Number of CPUs Supported 1
Weight 540 g (1.19 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC693CHS398?

Answer: Yes. We offer repairs for the IC693CHS398 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693CHS398?

Answer: If you buy the IC693CHS398 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693CHS398 online?

Answer: Yes. Automation Stop sells the IC693CHS398 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693CHS398?

Answer: The IC693CHS398 is made by Emerson - GE Fanuc.


Question: What Baseplate option does the IC693CHS398 have?

Answer: The Allen Bradley/Rockwell Automation IC693CHS398 has a Expansion Baseplate option.


Question: What Brand is included with the Allen Bradley Automation IC693CHS398?

Answer: The IC693CHS398 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Compatibility of the IC693CHS398?

Answer: The Rockwell-Automation IC693CHS398 has a Compatibility of 90-30 PLCs.


Question: What is the Description of the IC693CHS398?

Answer: The Description of the IC693CHS398 is 5-slot expansion baseplate.


Question: What is the Dimensions of the Allen Bradley-Rockwell Automation IC693CHS398?

Answer: The Allen Bradley-Rockwell Automation IC693CHS398 has a Dimensions of 10.43 x 5.12 x 5.59 in. (W x H x D).


Question: What is the Distance of the IC693CHS398?

Answer: The Allen Bradley/Rockwell Automation IC693CHS398 has a Distance of Up to 50 feet.


Question: What Load requirement does the IC693CHS398 have?

Answer: The IC693CHS398 has a Load requirement of 170 mA at +5 VDC.


Question: What is the Maximum Number of CPUs Supported of the IC693CHS398?

Answer: The IC693CHS398 has a Maximum Number of CPUs Supported of 1.


Question: What Number of slots does the IC693CHS398 have?

Answer: The IC693CHS398 has a Number of slots of 5.


Question: What part Number does the Rockwell Automation IC693CHS398 have?

Answer: The Rockwell Automation IC693CHS398 has a unit Number of IC693CHS398.


Question: What is the Voltage of the IC693CHS398?

Answer: The Voltage of the IC693CHS398 is 5 Volts DC.


Question: What Weight does the IC693CHS398 have?

Answer: The Weight of the IC693CHS398 is 540 g (1.19 lb).


Series information for IC693CHS398

For additional information about IC693CHS398 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693CHS398.

Revision Part # Also Known As Availability
IC693CHS398B IC693CHS398 Series B, Rev B Request a Quote
IC693CHS398C IC693CHS398 Series C, Rev C Request a Quote
IC693CHS398D IC693CHS398 Series D, Rev D Request a Quote
IC693CHS398E IC693CHS398 Series E, Rev E Request a Quote
IC693CHS398G IC693CHS398 Series G, Rev G Request a Quote
IC693CHS398H IC693CHS398 Series H, Rev H Request a Quote
IC693CHS398J IC693CHS398 Series J, Rev J Request a Quote

Common Misspellings:

  • IC693CHS39B
  • IC693CH5398
  • IC693CH539B
  • ICG93CHS398
  • ICG93CHS39B
  • ICG93CH5398
  • ICG93CH539B
  • 1C693CHS398
  • 1C693CHS39B
  • 1C693CH5398
  • 1C693CH539B
  • 1CG93CHS398
  • 1CG93CHS39B
  • 1CG93CH5398
  • 1CG93CH539B

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP