GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693DSM314

✓ In Stock

IC693DSM314 Image 1 thumbnail
IC693DSM314 Image 2 thumbnail
IC693DSM314 Image 3 thumbnail
IC693DSM314 Image 4 thumbnail
IC693DSM314 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693DSM314
Series: Series 90-30
UPC: 600873292399

Description:

The GE Fanuc Emerson IC693DSM314 is a high-efficiency servo motion controller that can control four (4) servo axis. The DSM314 supports either digital mode to control GE digital servos or analog mode to monitor analog servos. The IC693DSM314 provides a quadrature encoder for follower master axis. The IC693DSM314 can be used in many analogs, digital, and stepper motion applications.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693DSM314 is a high-efficiency servo motion controller that can control four (4) servo axis. The DSM314 supports either the digital mode to control GE digital servos or the analog mode to monitor analogue servos. The IC693DSM314 provides a quadrature encoder for follower master axis. The IC693DSM314 can be used in many analogs, digital, and stepper motion applications. The DSM314 includes a DSP to control GE servos and offers a block processing time less than 5 milliseconds. The IC693DSM314 has five (5) status LED indicators on the front side. The IC693DSM314 provides a simple instruction set for either single or multi-axis motion program with synchronized block start. The DSM314 can be programmed and configured with VersaPro software. The IC693DSM314 supports ten (10) programs and forty (40) subroutines which can be loaded through the PLC backplane.

The IC693DSM314 has a user memory of fifteen (15) kilobytes to store user data and flash memory to save CPU firmware. The DSM314 has four (4) connectors of 36-pin which are located at the front side of the controller. The IC693DSM314 requires a current of 1.3 Amperes at a voltage rating of 5 Volts DC. This controller has a front panel COMM port to upgrade its firmware. The DSM314 provides two-position capture strobe inputs and captures the axis position in less than 20 microseconds. The IC693DSM314 offers a resolution of 13-bit analog output which can be either configured by PLC or employed as servo tuning controller. The IC693DSM314 automatically sends data between PLC tables and this controller without user programming. This controller operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Motion mate digital 4-axis servo controller module (DSM314) for Series 90-30 PLCs
Part Number IC693DSM314
Module Type Servo module
Drive Beta i Series Digital and Analog Servos
Drive Interface Digital for Alpha and Beta Series. ±10V velocity or torque command for analog
Axis 2 Digital and 1 Analog or 4 Analog
Encoder Support Incremental master (1Mhz)
Axis Configuration Parallel or cascade
User Memory 15 Kbytes
Analog Inputs 4 - In Digital Mode 8 - In Analog Mode
Analog Outputs 4 - In Digital Mode 0 - In Analog Mode
Local Fast Inputs 12 (24 V), 8 (5 V)
Local Fast Outputs 4 SSR Outputs (24 VDC, 125 mA)
Connector Type (4) 36 pin
Internal Power Used 1300 mA @ 5 VDC
Maximum Position Units 500,000,000 User Units or Counts, whichever is greater.
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC693DSM314?

Answer: Yes. We offer repairs for the IC693DSM314 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693DSM314?

Answer: If you buy the IC693DSM314 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693DSM314 online?

Answer: Yes. Automation Stop sells the IC693DSM314 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693DSM314?

Answer: The IC693DSM314 is made by Emerson - GE Fanuc.


Question: What Analog Inputs does the Allen-Bradley IC693DSM314 have?

Answer: The IC693DSM314 has a Analog Inputs of 4 - In Digital Mode 8 - In Analog Mode.


Question: What is the Analog Outputs of the Allen Bradley Automation IC693DSM314?

Answer: The Analog Outputs of the IC693DSM314 is 4 - In Digital Mode 0 - In Analog Mode.


Question: What is the Axis of the IC693DSM314?

Answer: The Axis of the Allen-Bradley IC693DSM314 is 2 Digital and 1 Analog or 4 Analog.


Question: What Axis Configuration is included with the Allen Bradley Automation IC693DSM314?

Answer: The IC693DSM314 has a Parallel or cascade Axis Configuration.


Question: What Brand is included with the IC693DSM314?

Answer: The IC693DSM314 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Connector Type of the IC693DSM314?

Answer: The Rockwell-Automation IC693DSM314 has a Connector Type of (4) 36 pin.


Question: What Drive does the IC693DSM314 have?

Answer: The Allen-Bradley IC693DSM314 has a Beta i Series Digital and Analog Servos Drive.


Question: What Drive Interface does the Rockwell Automation IC693DSM314 have?

Answer: The Drive Interface of the Rockwell Automation IC693DSM314 is Digital for Alpha and Beta Series. ±10 volts velocity or torque command for analog.


Question: What Encoder Support does the Allen Bradley Automation IC693DSM314 have?

Answer: The IC693DSM314 has a Encoder Support of Incremental master (1Mhz).


Question: What Internal Power Used does the Allen Bradley-Rockwell Automation IC693DSM314 have?

Answer: The Allen Bradley-Rockwell Automation IC693DSM314 has a Internal Power Used of 1300 mA @ 5 VDC.


Question: What Local Fast Inputs does the Rockwell-Automation IC693DSM314 have?

Answer: The Local Fast Inputs of the Rockwell-Automation IC693DSM314 is 12 (24 V), 8 (5 V).


Question: What is the Local Fast Outputs of the Rockwell-Automation IC693DSM314?

Answer: The Rockwell-Automation IC693DSM314 has a Local Fast Outputs of 4 SSR Outputs (24 VDC, 125 mA).


Question: What Maximum Position Units does the IC693DSM314 have?

Answer: The Maximum Position Units of the IC693DSM314 is 500,000,000 User Units or Counts, whichever is greater..


Question: What Module Type is included with the Allen Bradley IC693DSM314?

Answer: The Allen Bradley IC693DSM314 has a Servo module Module Type.


Question: What unit Number does the Rockwell-Automation IC693DSM314 have?

Answer: The unit Number of the IC693DSM314 is IC693DSM314.


Question: What is the User random-access memory (RAM) of the Rockwell-Automation IC693DSM314?

Answer: The User random-access memory (RAM) of the IC693DSM314 is 15 kilobytes.


Series information for IC693DSM314

For additional information about IC693DSM314 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693DSM314.

Revision Part # Also Known As Availability
IC693DSM314-AA IC693DSM314 Series AA, Rev AA Request a Quote
IC693DSM314-AE IC693DSM314 Series AE, Rev AE Request a Quote

Common Misspellings:

  • IC693DSM3I4
  • IC693D5M314
  • IC693D5M3I4
  • ICG93DSM314
  • ICG93DSM3I4
  • ICG93D5M314
  • ICG93D5M3I4
  • 1C693DSM314
  • 1C693DSM3I4
  • 1C693D5M314
  • 1C693D5M3I4
  • 1CG93DSM314
  • 1CG93DSM3I4
  • 1CG93D5M314
  • 1CG93D5M3I4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP