GE / IP FANUC Series 90/30 In Stock
sales@automationstop.com
Call Now
(919) 867-5794
Mon-Fri 8AM-5PM EST
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693DSM324 |
| Series: | Series 90-30 |
| UPC: | 165647495456 |
Description:
The IC693DSM324 was designed and produced by GE Fanuc as a motion controller. This device works on high-speed operational procedures such as math sequencing and logic decision making. The current rating of this module is 860 milliamperes, and it requires an additional 500 milliamperes for the external encoder. The operating temperature range of this module is 0 to 60 degrees Celsius, with a storage temperature range of -40 to 85 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693DSM324 was designed and distributed by GE Fanuc as a motion controller. This GE Fanuc component requires five (5) volts of direct current (DC). Aside from that, the DSM current, together with the encoder current, is eight hundred and sixty (860) milliamperes. The load parameter COMM REQ function in the GE Fanuc IC693DSM324 is frequently utilized in order to avoid programmable logic controller, or PLC, component malfunctions. Furthermore, the local logic of the module provides digital output control (high-speed) and it is synchronous to axis motion. Additionally, the IC693DSM324 is mounted to a Series 90-30 baseplate. This GE Fanuc device draws eight hundred and sixty (860) milliamperes and it requires an extra five hundred (500) milliamperes for the external encoder to get an appropriate power supply. The device is made of high-quality materials and has a metal casing that can withstand operation in a harsh industrial setting. In addition to that, the IC693DSM324 controller is a CE-approved and UL-listed component that functions in a zero (0) to sixty (60) degree Celsius temperature range, or the equivalent range of thirty-two (32) to one hundred and forty (140) degrees Fahrenheit. Moreover, the IC693DSM324 device can be stored at temperatures that range from -40 to 85 degrees Celsius, or the equivalent range of -40 to 185 degrees Fahrenheit. This device is capable of resisting mild shock and vibration levels. High-speed operation, synchronous math operations, sophisticated handling of power losses, simple programming, an electronic CAM follower, and control of digital servo motors are among the characteristics of the IC693DSM324 controller.
FAQ
Question: Does Automation Stop offer repairs on the IC693DSM324?
Answer: Yes. We offer repairs for the IC693DSM324 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693DSM324?
Answer: If you buy the IC693DSM324 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693DSM324 online?
Answer: Yes. Automation Stop sells the IC693DSM324 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693DSM324?
Answer: The IC693DSM324 is made by Emerson - GE Fanuc.
Series information for IC693DSM324
For additional information about IC693DSM324 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693DSM324.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693DSM324-AA | IC693DSM324 Series AA, Rev AA | Request a Quote |
| IC693DSM324-AC | IC693DSM324 Series AC, Rev AC | Request a Quote |
Common Misspellings:
- IC693D5M324
- ICG93DSM324
- ICG93D5M324
- 1C693DSM324
- 1C693D5M324
- 1CG93DSM324
- 1CG93D5M324
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
