GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC697ALG320

✓ In Stock

IC697ALG320 Image 1 thumbnail
IC697ALG320 Image 2 thumbnail
IC697ALG320 Image 3 thumbnail
IC697ALG320 Image 4 thumbnail
IC697ALG320 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697ALG320
Series: Series 90-70
UPC: 799705795181

Description:

The GE Fanuc Emerson IC697ALG320 is an analog voltage/current output module that can be employed for the Series 90-70 of Programmable Logic Controllers (PLCs). This module provides four (4) output channels with a resolution of 16 bits. The IC697ALG320 outputs can be programmed for either current or voltage output ranges. The IC697ALG320 can be programmed and configured through either MS-DOS or Windows through either SNP port or Ethernet TCP/IP interface. This unit weighs approximately 840 grams (1.85 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC697ALG320 is a high-level analog voltage/current output module that can be employed for the Series 90-70 of Programmable Logic Controllers (PLCs). This module provides four (4) output channels which can be enabled or disabled individually with a resolution of 16 bits and 14 bits monotonicity. The IC697ALG320 offers a fast channel acquisition time of 2 milliseconds. The IC697ALG320 outputs can be programmed for either voltage or current output ranges: from 4 milliamperes to 20 milliamperes, from 0 milliamperes to 22.5 milliamperes, or from -10 Volts DC to 10 Volts DC. This module draws a current of 1.6 Amperes at a voltage of 5 Volts DC and has one LED indicator to show the power and module status. The IC697ALG320 can be programmed and configured with either MS-DOS or Windows through either an SNP port or Ethernet TCP/IP interface.

The IC697ALG320 outputs employ the backplane optical isolation offered by optocouplers to provide electrical isolation and to prevent steady-state and transient overvoltage cases. The IC697ALG320 includes a non-volatile EEPROM memory that stores factory calibration data. The IC697ALG320 outputs can be individually scaled by the user by converting engineering unit values into either milliamperes or millivolts. The IC697ALG320 can be easily mounted on either an expansion or CPU rack and connected using faceplate screw terminals which are located on the 40 terminal block connector. The IC697ALG320 doesn’t require DIP switches or jumpers to be programmed and configured. It weighs approximately 840 grams (1.85 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 4 channels, high-level voltage/current analogue output module for Series 90-70 PLCs
Part Number IC695ALG808
Number of Channels 4
Load Requirement 1.6 Amperes maximum at 5 VDC
Resolution 16 bit with 14 bit monotonicity
Response Time Voltage : 0.5 milliseconds / current : 1 millisecond
Output Current Ranges 0.0 mA to 22.5 mA (4 to 20 mA default)
Output Voltage Ranges –10 volts to +10 volts (default)
Power Dissipation within Module 8.3 Watts, maximum
Analog Update Rate 2 milliseconds
Operating Temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Weight 840 g (1.85 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC697ALG320?

Answer: Yes. We offer repairs for the IC697ALG320 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697ALG320?

Answer: If you buy the IC697ALG320 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697ALG320 online?

Answer: Yes. Automation Stop sells the IC697ALG320 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697ALG320?

Answer: The IC697ALG320 is made by Emerson - GE Fanuc.


Question: What is the Analog Update Rate of the Rockwell Automation IC697ALG320?

Answer: The IC697ALG320 has a Analog Update Rate of 2 milliseconds.


Question: What Brand does the Allen Bradley Automation IC697ALG320 have?

Answer: The IC697ALG320 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Load Requirement of the IC697ALG320?

Answer: The Load Requirement of the Allen Bradley Automation IC697ALG320 is 1.6 Amperes maximum at 5 VDC.


Question: What Number of Channels does the IC697ALG320 have?

Answer: The Number of Channels of the Allen Bradley IC697ALG320 is 4.


Question: What is the Operating Temperature of the IC697ALG320?

Answer: The Operating Temperature of the IC697ALG320 is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).


Question: What Output Current Ranges does the Rockwell Automation IC697ALG320 have?

Answer: The Output Current Ranges of the IC697ALG320 is 0.0 mA to 22.5 mA (4 to 20 mA default).


Question: What is the Output Voltage Ranges of the Allen Bradley-Rockwell Automation IC697ALG320?

Answer: The Output Voltage Ranges of the Allen Bradley-Rockwell Automation IC697ALG320 is –10 volts to +10 volts (default).


Question: What unit Number does the Rockwell Automation IC697ALG320 have?

Answer: The unit Number of the IC697ALG320 is IC695ALG808.


Question: What is the Power Dissipation within Module of the IC697ALG320?

Answer: The Power Dissipation within Module of the IC697ALG320 is 8.3 Watts, maximum.


Question: What is the Resolution of the IC697ALG320?

Answer: The Resolution of the IC697ALG320 is 16 bit with 14 bit monotonicity.


Question: What is the Response Time of the IC697ALG320?

Answer: The IC697ALG320 has a Response Time of Voltage : 0.5 milliseconds / current : 1 millisecond.


Question: What Weight does the Allen Bradley IC697ALG320 have?

Answer: The Allen Bradley IC697ALG320 has a Weight of 840 g (1.85 lb) .


Series information for IC697ALG320

For additional information about IC697ALG320 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697ALG320.

Revision Part # Also Known As Availability
IC697ALG320A IC697ALG320 Series A, Rev A Request a Quote
IC697ALG320D IC697ALG320 Series D, Rev D Request a Quote
IC697ALG320G IC697ALG320 Series G, Rev G Request a Quote
IC697ALG320J IC697ALG320 Series J, Rev J Request a Quote

Common Misspellings:

  • IC697ALG32O
  • IC697AL6320
  • IC697AL632O
  • ICG97ALG320
  • ICG97ALG32O
  • ICG97AL6320
  • ICG97AL632O
  • 1C697ALG320
  • 1C697ALG32O
  • 1C697AL6320
  • 1C697AL632O
  • 1CG97ALG320
  • 1CG97ALG32O
  • 1CG97AL6320
  • 1CG97AL632O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP