GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC697CMM742

✓ In Stock

IC697CMM742 Image 1 thumbnail
IC697CMM742 Image 2 thumbnail
IC697CMM742 Image 3 thumbnail
IC697CMM742 Image 4 thumbnail
IC697CMM742 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697CMM742
Series: Series 90-70
UPC: 799705794986

Description:

The GE Fanuc Emerson IC697CMM742 is a TCP/IP Ethernet interface type 2 module that can be employed for the Series 90-70 of Programmable Logic Controllers (PLCs). The IC697CMM742 offers high-efficiency TCP/IP communication, employing SRTP for the IC697 PLC and exchanges data employing logic and configuration-based EGD. The IC697CMM742 weighs approximately 680 grams (1.49 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC697CMM742 is a TCP/IP Ethernet interface type 2 module that can be employed for the Series 90-70 of Programmable Logic Controllers (PLCs). The IC697CMM742 offers three (3) ports which are 10Base2 with BNC connector, 10BaseT with RJ-45 connector, and AUI with 15-pin D-connector for communication between Ethernet LAN and IC697 PLC. The IC697CMM742 10Base2 and 10BaseT ports offer a direct link to either 10Base2 or 10BaseT networks without the need of an external transceiver. The IC697CMM742 15-pin AUI port permits to choose between different mediums such as 10BaseT, 10Base2, 10Base5, 10Broad36, and 10BaseF medium with 802.3 compatible transceivers selected by the user. The IC697CMM742 firmware can be loaded and upgraded from PC through the RS-485 serial port. The IC697CMM742 is a single slot CPU that can be programmed and configured through the IC641 PLC programming software.

The IC697CMM742 offers high-efficiency TCP/IP communication employing SRTP for the IC697 PLC and exchanges data employing logic and configuration-based EGD. The IC697CMM742 senses, detects, and selects automatically the network port in the process. The IC697CMM742 requires a current of 2.0 Amperes at a voltage of 5 Volts DC and a current of 0.5 Amperes at a voltage of 12 Volts DC. The IC697CMM742 includes a restart pushbutton and four (4) LED indicators on the faceplate to show the module and communication status. The IC697CMM742 contains five slow-acting protection fuses with a voltage of 250 Volts and a current of 1 Ampere. The IC697CMM742 weighs approximately 680 grams (1.49 pounds) while shipping and operates at zero (0) to 55 degrees Celsius (32 to 131 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series TCP/IP Ethernet interface type 2 module for Series 90-70
Part Number IC697CMM742
Product Type TCP/IP Ethernet (Type 2) Interface Module
Voltage Rating 12 VDC / 5 VDC
Current Rating 2.0 Amperes @ 5.0 Volts / 0.5 Amperes @ 12 Volts
Number of Network Ports 3
Network Ports 10Base-T RJ-45 Port, 10Base2 BNC Port, and AUI
Station Manager Port RJ-11 Serial RS-232 Local Station Manager Port
Software Load Port 15-Pin D-Type Serial Software Load Port
Configuration Software IC641 Programming Software Version 6.02 or Later
Number of LED Indicators 4
LED Indicators MODULE OK / LAN ONLINE / SERIAL ACTIVE / STATUS
Fuse, Replaceable 5 x 20mm, 250V, 1.0A, slow acting
Operating Temperature 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit)
Weight 680 g (1.49 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC697CMM742?

Answer: Yes. We offer repairs for the IC697CMM742 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CMM742?

Answer: If you buy the IC697CMM742 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697CMM742 online?

Answer: Yes. Automation Stop sells the IC697CMM742 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697CMM742?

Answer: The IC697CMM742 is made by Emerson - GE Fanuc.


Question: What Brand does the IC697CMM742 have?

Answer: The IC697CMM742 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Configuration Software of the Allen Bradley/Rockwell Automation IC697CMM742?

Answer: The Configuration Software of the Allen Bradley/Rockwell Automation IC697CMM742 is IC641 Programming Software Version 6.02 or Later.


Question: What Current Rating does the IC697CMM742 have?

Answer: The Current Rating of the Allen-Bradley IC697CMM742 is 2.0 Amperes @ 5.0 Volts / 0.5 Amperes @ 12 Volts.


Question: What is the Fuse, Replaceable of the IC697CMM742?

Answer: The IC697CMM742 has a Fuse, Replaceable of 5 x 20mm, 250 volts 1.0A, slow acting.


Question: What LED Indicators are included with the IC697CMM742?

Answer: The IC697CMM742 has LED Indicators MODULE OK / LAN ONLINE / SERIAL ACTIVE / STATUS.


Question: What Network Ports does the IC697CMM742 have?

Answer: The Network Ports of the Rockwell Automation IC697CMM742 is 10Base-T RJ-45 Port, 10Base2 BNC Port, and AUI.


Question: What is the Number of LED Indicators of the IC697CMM742?

Answer: The Allen Bradley Automation IC697CMM742 has a Number of LED Indicators of 4.


Question: What is the Number of Network Ports of the IC697CMM742?

Answer: The Number of Network Ports of the Allen Bradley-Rockwell Automation IC697CMM742 is 3.


Question: What is the Operating Temperature of the IC697CMM742?

Answer: The Rockwell-Automation IC697CMM742 has a Operating Temperature of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit).


Question: What part Number does the Allen-Bradley IC697CMM742 have?

Answer: The part Number of the Allen-Bradley IC697CMM742 is IC697CMM742.


Question: What is the Product Type of the Allen Bradley/Rockwell Automation IC697CMM742?

Answer: The Allen Bradley/Rockwell Automation IC697CMM742 has a Product Type of TCP/IP Ethernet (Type 2) Interface Module.


Question: What Software Load Port does the IC697CMM742 have?

Answer: The Software Load Port of the IC697CMM742 is 15-Pin D-Type Serial Software Load Port.


Question: What is the Station Manager Port of the Allen Bradley/Rockwell Automation IC697CMM742?

Answer: The Station Manager Port of the Allen Bradley/Rockwell Automation IC697CMM742 is RJ-11 Serial RS-232 Local Station Manager Port.


Question: What Voltage Rating does the Allen Bradley-Rockwell Automation IC697CMM742 have?

Answer: The IC697CMM742 has a Voltage Rating of 12 VDC / 5 VDC.


Question: What is the Weight of the IC697CMM742?

Answer: The Weight of the IC697CMM742 is 680 g (1.49 lb).


Series information for IC697CMM742

For additional information about IC697CMM742 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CMM742.

Revision Part # Also Known As Availability
IC697CMM742-FD IC697CMM742 Series FD, Rev FD Request a Quote
IC697CMM742-GH IC697CMM742 Series GH, Rev GH Request a Quote
IC697CMM742-HJ IC697CMM742 Series HJ, Rev HJ Request a Quote
IC697CMM742-LL IC697CMM742 Series LL, Rev LL Request a Quote

Common Misspellings:

  • ICG97CMM742
  • 1C697CMM742
  • 1CG97CMM742

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP