GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC697CPU782

✓ In Stock

IC697CPU782 Image 1 thumbnail
IC697CPU782 Image 2 thumbnail
IC697CPU782 Image 3 thumbnail
IC697CPU782 Image 4 thumbnail
IC697CPU782 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697CPU782
Series: Series 90-70
UPC: 799705792753

Description:

The GE Fanuc IC697CPU782 is a 16 MHz CPU belonging to the Series 90-70 product line. This CPU module supports 512 kilobytes (KB) of expansion memory. This memory is usually backed by a battery within the same slot. It comes with configurable data and program memory. This device is capable of performing floating-point calculations at speeds of 0.4 microseconds per Boolean function. This CPU supports 12K inputs and outputs of any mix, as well as up to 8K analog I/O.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number IC697CPU782 is a CPU module. This device belongs to GE Fanuc's Series 90-70 product line. Designed to fit into a single rack slot, this CPU is capable of controlling machinery, as well as material handling systems, in real-time. A rack-mounted backplane gives this device the ability to communicate with various I/O modules. To operate and control this device, use the run/stop control switch or a connected computer with the corresponding software. The IC697CPU782 has a 16 megahertz (MHz) microprocessor with the ability to perform floating-point calculations at performance speeds of 0.4 microseconds per Boolean function. 

This device can process various mixtures of I/O input. For instance, it can accommodate eight (8) kilobytes of analog I/O data, and a maximum of twelve (12) kilobytes of inputs and outputs data. The IC697CPU782 is one type of PLC that can be set up in a single rack slot. This input module is designed to control industrial and material handling systems in the real world.

Programming does not necessitate the use of DIP switches or jumpers. The serial or parallel interface can be used to configure the device. If the appropriate hardware is installed, an Ethernet connection is also available. To program the IC697CPU782, you'll need MS-DOS or a Windows 95 or Windows NT computer with the right software. The configuration settings are protected by a password and a built-in memory protection key switch. Lastly, before attempting to install, turn off the power to the rack. Make sure the memory key switch is turned off. The stop position should be selected on the run/stop switch.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at sales@automationstop.com.

FAQ

Question: Does Automation Stop offer repairs on the IC697CPU782?

Answer: Yes. We offer repairs for the IC697CPU782 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CPU782?

Answer: If you buy the IC697CPU782 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697CPU782 online?

Answer: Yes. Automation Stop sells the IC697CPU782 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697CPU782?

Answer: The IC697CPU782 is made by Emerson - GE Fanuc.


Series information for IC697CPU782

For additional information about IC697CPU782 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CPU782.

Revision Part # Also Known As Availability
IC697CPU782C IC697CPU782 Series C, Rev C Request a Quote
IC697CPU782D IC697CPU782 Series D, Rev D Request a Quote
IC697CPU782-HB IC697CPU782 Series HB, Rev HB Request a Quote
IC697CPU782-JE IC697CPU782 Series JE, Rev JE Request a Quote

Common Misspellings:

  • IC697CPU7B2
  • ICG97CPU782
  • ICG97CPU7B2
  • 1C697CPU782
  • 1C697CPU7B2
  • 1CG97CPU782
  • 1CG97CPU7B2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP