Allen-Bradley 2711P-T10C4D9

Part number 2711P-T10C4D9 is an operator terminal, manufactured by the Allen-Bradley company, that is primarily utilized in an industrial setting. Additionally, this device is primarily used in conjunction with machines and applications within said industrial setting. This panel belongs to the Allen-Bradley PanelView Plus 6 product line. The 2711P-T10C4D9 is used to display various operator functions, as well as allowing an operator to manage numerous applications, data, and programs, as well as monitor them. The display size of this Allen-Bradley product measure ten point four (10.4) inches and is even equipped with a color active matrix, thin-film transistor (TFT) display. This display allows for vibrant colors to be viewed for various applications for this device. Additionally, the 2711P-T10C4D9 is equipped with a touchscreen interface that has an actuation rating of 1 million presses. The resolution on this device's screen is six-forty by four-eighty (640 x 480) with 18-bit color graphics. This product's effective display area comes out to two hundred and eleven (211) millimeters x one hundred and fifty-eight (158) millimeters, or 8.3 inches x 6.2 inches.

This device, the 2711P-T10C4D9, recieves power via an external power supply with an eighty-five to two hundred sixty-four (85 to 264) volt alternating current (AC) supply voltage. In this terminal are embedded communication ports. The ports included with this product are one (1) RS-232 port and one (1) Ethernet port. This terminal also has two (2) USB ports embedded within in it. This allows the panel to be connected to different devices to exchange information and data, or to do other functions. This terminal has an available five hundred and twelve (512) megabytes (MB) random access memory (RAM), as well as 512 megabytes, including seventy-nine (79) megabytes of free user memory, non-volatile flash memory. For this device, the weight during the shipping process is roughly eight (8) pounds and the dimensions during the shipping process measure out to 16 inches x 14 inches x 8 inches. 

The terminal's touch screen display has 384 touch cells that is comprised of 24 columns by 16 rows. These touch cells start functions when operators touch the display screen. On touch screen terminals, operators can start an on-screen object's designated function, such as an on or off button, by touching the screen object. Each interactive function that is shown on the display screen occupies either one or more of the 384 touch cells. The terminal can operate in a temperature range of 0-55 degrees Celsius (32-131 degrees Fahrenheit) and can be stored in temperatures ranging from -40-85 degrees Celsius (-40-185 degrees Fahrenheit). As this terminal is DC rated, it should not be connected to an AC power source. Doing so could cause damage to the PanelView device. As this terminal requires a DC power input, operators must connect the earth/ground terminal on the 2711P-T10C4D9 to a low-impedance earth/ground. This PanelView terminal is intended to be installed and used in a NEMA type 12 or 13, NEMA 4x, (for outdoor use only), or IP54 or IP65 rated enclosure. On this 1000 terminal, the earth/ground connect is on the back of the display module. The touch properties menu is available to operators using the 2711P-T10C4D9 terminal because of the device’s touch screen display. Operators can use the touch properties menu to calibrate, or recalibrate, the touch screen. The display's sensitivity to taps can also be set in this menu. Recalibration lets you recalibrate the display screen if the device is not responding appropriately to inputs. Double-tap sensitivity can also be set in the touch properties menu.