Allen-Bradley MPL-A420P-HJ72AA

Part Number MPL-A420P-HJ72AA is an MP-Series Low Inertia Servo Motor that is manufactured by Allen-Bradley. Additionally, this specific motor is a two hundred and thirty (230) volt brushless motor. This particular motor made by Allen-Bradley gives absolute feedback. This motor's frame size is a 4, which equals measurements of 115 mm, or 4.53 inches. The rated speed of this particular motor is five thousand (5000) revolutions per minute (RPM). This motor has an output of 2.0 kW. This motor is a non-brake motor. The rotor inertia of the Allen-Bradley MPL-A420P-HJ72AA is 0.00026 kg-m² (0.0023 lb-in.-s²). This motor is built to withstand the harsh demands of various motor-systems that run on high-performance. This is due to the fact that Allen-Bradley made this part high dynamic, as well as compact. The primary applications and machines that this motor can work with include automotive machines, packaging, assembly systems, material handling, etc. 

The Allen-Bradley MPL-A420P-HJ72AA has a stall torque of 4.74 Nm, or forty-two (42) pounds to an inch, continuous. The Peak Stall Torque of this motor is 10.2 Nm, or ninety (90) pounds to an inch. To add on, the Allen-Bradley MPL-A420P-HJ72AA has a continuous stall current of 12.7 amperes. This device also has a peak stall current of 46.0 amperes. The Allen-Bradley MPL-A420P-HJ72AA comes embedded with SpeedTEC DIN connectors. These connectors are designed to provide a one-quarter turn connection quick. These connectors also meet a wide range of codes and standard requirements. These include NFPA 79 complaint, DESINA cable jacket coloring, UL-Listed, 600V insulation rating, RoHS and REACH, as well as tray cable rating. 

The Allen-Bradley MPL-A420P-HJ72AA is a low inertia high output servo motor. The motor was designed to be a smaller size than the industry standard, while still being able to deliver a significantly higher torque than competitors. Using a load fatigue of 20,000 years and applying the radial loads in the middle of the shaft extension, the radial load force rating of the MPL-A420P-HJ72AA is 45kg (99lb) and the axial load force rating with the maximum radial load is 18kg (40lb). With a zero radial load, the axial load force rating for the motor is 25kg (55lb). The motor has a rated frequency of 0-400 Hz and a rated voltage of 230 VAC. While performing at the rated frequency, the MPL-A420P-HJ72AA should have a rated performance of 2kW and a rated rotational speed of 5000 1/min. The MPL-A420P-HJ72AA has an operating temperature range of 0-40 degrees Celsius (32-104 degrees Fahrenheit) and should be stored in temperatures ranging from -30-70 degrees Celsius (-22-158 degrees Fahrenheit). The low inertia motor comes installed with a mounting pilot to help users align the motor on a machine. The servo motor uses standard IEC metric for mounting and installation purposes. The SpeedTEC DIN connector on the motor allows for the flexible orientation of connectors and the use of a single cable family. The single-turn encoder in the motor provides users with high-resolution position feedback within one turn. The MPL-A420P-HJ72AA is a UL recognized component to applicable UL and CSA standards and CE marked for all applicable directives.