Allen-Bradley 1771-WD

Part number 1771-WD is a PLC-5 series field wiring arm that was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This module requires an AC/DC voltage of 220 volts and is often utilized in applications that operate on many stages with an isolated circuit. Its operating voltage varies between 184 and 276 volts AC, as well as 18 and 276 volts DC, with a backplane current rating of 74 milliamperes. This Allen Bradley device has a total power consumption of 74 milliamperes. It features an AC signal delay (off) of 29 milliseconds, give or take 7 milliseconds, as well as a DC signal delay (off) of 30 milliseconds, give or take 8 milliseconds. Included with this device are twelve (12) terminals with twelve (12) wires. In addition, this product has a total of eight (8) I/O inputs. This Allen Bradley field wiring arm is protected via a conformal coating. This device has a recommended screw torque rating of 7.9 lb-in. The exterior shell of the Allen Bradley 1771-WD field wiring arm is made of thermoplastic, which is often used for supplemental industrial components. The primary goal of this device is to connect wiring using I/O units for the Bulletin 1771 series of products. Wires may be quickly and simply attached to the wiring arm using a spade lug or even a clamp. This field wiring arm has an approximate weight of 100 grams, or the equivalent of roughly 0.2 pounds. This device has physical dimensions that measure 115 mm x 317 mm x 160 mm. 

Part number 1771-WD is a PLC-5 series field wiring arm that was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This module requires an AC/DC voltage of 220 volts and is often utilized in applications that operate on many stages with an isolated circuit. Its operating voltage varies between 184 and 276 volts AC, as well as 18 and 276 volts DC, with a backplane current rating of 74 milliamperes. This Allen Bradley device has a total power consumption of 74 milliamperes. It features an AC signal delay (off) of 29 milliseconds, give or take 7 milliseconds, as well as a DC signal delay (off) of 30 milliseconds, give or take 8 milliseconds. Included with this device are twelve (12) terminals with twelve (12) wires. In addition, this product has a total of eight (8) I/O inputs. This Allen Bradley field wiring arm is protected via a conformal coating. This device has a recommended screw torque rating of 7.9 lb-in. The exterior shell of the Allen Bradley 1771-WD field wiring arm is made of thermoplastic, which is often used for supplemental industrial components. The primary goal of this device is to connect wiring using I/O units for the Bulletin 1771 series of products. Wires may be quickly and simply attached to the wiring arm using a spade lug or even a clamp. This field wiring arm has an approximate weight of 100 grams, or the equivalent of roughly 0.2 pounds. This device has physical dimensions that measure 115 mm x 317 mm x 160 mm.