GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-B4530K-MJ74AA

Catalog number MPL-B4530K-MJ74AA is a low-inertia servo motor from Allen Bradley's MP series of products. This unit has a 130 mm frame, as well as a 3.0 in. long magnetic stack. The MPL-B4530K-MJ74AA has a 400 VAC voltage rating and a 4000 rpm speed rating. This motor is equipped with a multi-turn encoder and a 24 VDC brake. It can be mounted via the use of a flange mount.

MPL-B4530K-MK72AA

The Allen Bradley MPL-B4530K-MK72AA is an MPL-series AC servo motor with a 4000 RPM-rated speed and low inertia. Its frame measures 165 mm and its magnet stack measures 3 in. It has a multi-turn encoder and circular DIN connectors positioned at a right angle with 180 degrees of rotation.

MPL-B4530K-MK74AA

Part number MPL-B4530K-MK74AA, which is a low-inertia servo motor, was designed and produced by Allen-Bradley. This motor is powered via a voltage rated at 400 volts AC, and it operates at 4000 rev/min. This unit has a frame size of 130 millimeters and a magnetic stack length of three (3.0) inches. The MPL-B4530K-MK74AA utilizes a multi-turn encoder for feedback purposes. This product also has 24-volt DC brakes.

MPL-B4530K-RJ22AA

The MPL-B4530K-RJ22AA is an Allen Bradley brushless servo motor with a rated speed of 4000 revolutions per minute (RPM). It has bayonet-style cable connectors, as well as a shaft key. The MPL-B4530K-RJ22AA is classified as a low-inertia AC servo motor. This motor has two-pole resolver feedback and a frame size of 165 mm. The unit also has an IEC metric mounting flange and a 3-inch-long magnetic stack.

MPL-B4530K-SJ22AA

The MPL-B4530K-SJ22AA from Allen-Bradley is a servo motor belonging to the MP line of servo motors. This motor has a 400-volt AC-rated voltage, as well as low inertia. It operates at speeds of up to 4000 revolutions per minute. The MPL-B4530K-SJ22AA has a frame size of 130 mm. It also has a magnetic stack length of 3.0 in. This motor has a high-resolution encoder, which provides feedback in a single turn. This product even has circular bayonet connectors. This motor is suitable for motion control applications.

MPL-B4530K-SJ24AA

The MPL-B4530K-SJ24AA is an AC servo motor designed by Allen Bradley as part of the MP servo motor product line. This motor includes a 24 VDC brake. The MPL-B4530K-SJ24AA also includes a single-turn encoder with high resolution for the use of providing absolute position feedback. This servo motor has a 400 VAC rated voltage, as well as low inertia. The MPL-B4530K-SJ24AA can be mounted via the use of a mounting flange.

MPL-B4530K-SJ72AA

The MPL-B4530K-SJ72AA from Allen Bradley/Rockwell Automation is a servo motor. This unit operates via a 460-volt AC voltage rating. Additionally, the MPL-B4530K-SJ72AA operates at speeds rated up to 4000 revolutions per minute. This device has a 130 mm frame. It also has a 3.0 in. magnetic stack length. The MPL-B4530K-SJ72AA includes a single-turn high-resolution encoder for position feedback.

MPL-B4530K-SK72AA

Part number MPL-B4530K-SK72AA is a servo motor belonging to Allen Bradley's MPL series of products. This device features circular DIN connectors that may be rotated a maximum of 180 degrees. The power supply range of this motor is 400 VAC. It operates at a speed rated at 4000 rev/min. This servo motor is provided absolute position feedback via a single-turn high-resolution encoder. The frame of the MPL-B4530K-SK72AA measures 130 millimeters.

MPL-B4530K-SK74AA

The MPL-B4530K-SK74AA MPL is an Allen Bradley low-inertia servo motor from the MP series of servo motors. This unit was designed to meet the strict specifications of demanding control system applications. The MPL-B4530K-SK74AA has a 4000-revolution per minute (rpm) motor speed. It has free mounting holes that make it simple to mount with a flange. Its maximum power output rating is 2.6 kilowatts, and its voltage rating is 400 volts AC.

MPL-B4540F-MJ22AA

Product number MPL-B4540F-MJ22AA is a low inertia servo motor that was manufactured by Allen Bradley. This motor belongs to the MPL series of servo motors. It has a 130-millimeter frame and a 4.0-inch magnetic stack length. This device requires a 460-volt AC voltage to operate. The rated speed of the MPL-B4540F-MJ22AA is 3000 revolutions per minute.

MPL-B4540F-MJ24AA

A product of Allen-Bradley, part number MPL-B4540F-MJ24AA is a servo motor with a speed rating of 3000 revolutions per minute, as well as low inertia. This unit is part of the MP series of Allen-Bradley servo motors. The MPL-B4540F-MJ24AA has a 130-millimeter frame, along with a 4.0-inch magnetic stack. This servo motor is powered via a 400 VAC voltage. This unit features a multi-turn encoder for feedback purposes. Additionally, the MPL-B4540F-MJ24AA has a 24 VDC brake.

MPL-B4540F-MJ72AA

Manufactured by Allen-Bradley/Rockwell Automation, catalog number MPL-B4540F-MJ72AA is a low-inertia rotary servo motor belonging to the MP series of servo motors. It has a 400 VAC voltage rating, as well as a 130 mm frame and a 4.0 in. magnetic stack length. The speed at which the MPL-B4540F-MJ72AA operates is rated at 3000 revolutions per minute. This product is capable of being mounted via the use of a flange mount.

MPL-B4540F-MJ74AA

Manufactured by Allen Bradley, the MPL-B4540F-MJ74AA servo motor has a 400-volt rating, as well as low inertia. This servo motor's rated speed is 3000 revolutions per minute. For feedback purposes, the MPL-B4540F-MJ74AA features a multi-turn encoder with high resolution. It has circular DIN connectors and a 24 VDC brake. The MPL-B4540F-MJ74AA is mounted via a flange mount.

MPL-B4540F-MK22AA

Product number MPL-B4540F-MK22AA is an MP-series servo motor with low inertia. This unit has a voltage rating of 400 volts alternating current (AC). This motor's frame measures 130 millimeters, and its magnetic stack measures 4.0 inches. The MPL-B4540F-MK22AA has a rated speed of 3000 rev/min. This product features a multi-turn encoder for feedback purposes. The MPL-B4540F-MK22AA has circular bayonet connectors and a flange for mounting.

MPL-B4540F-MK24AA

Part number MPL-B4540F-MK24AA is an Allen Bradley servo motor. This product is part of the MP series of servo motors, and it has a 400-volt rated voltage. Additionally, this servo motor has low inertia. The MPL-B4540F-MK24AA has a rated operational speed of 3000 revolutions per minute. This motor has a high-resolution encoder that provides feedback in multiple turns. The MPL-B4540F-MK24AA has a 24-volt direct current (DC) brake, in addition to an IEC metric flange for mounting.

MPL-B4540F-MK72AA

Catalog number MPL-B4540F-MK72AA from Allen Bradley is an MP-series low-inertia servo motor. The voltage rating of this product is 400 volts. This product has a 130 mm frame, in addition to a 4.0 in. magnetic stack length. The MPL-B4540F-MK72AA's rated speed is 3000 r/min. This servo motor includes a high-resolution encoder that provides feedback in multiple turns. It has circular DIN connectors. The MPL-B4540F-MK72AA can be mounted via the use of a flange mount.

MPL-B4540F-MK74AA

The MPL-B4540F-MK74AA from Allen Bradley is an MP-series servo motor with a 400-volt voltage rating and low inertia. This device has a 130-millimeter frame, as well as a 4.0-inch magnetic stack length. The speed rating of this servo motor is 3000 rev/min. For feedback purposes, the MPL-B4540F-MK74AA features a multi-turn encoder with high resolution. This servo motor also features circular DIN connectors, a 24-volt DC brake, and a mounting flange.

MPL-B4540F-SJ22AA

The Allen-Bradley MPL-B4540F-SJ22AA low-inertia servo motor has a 400-volt AC rating. The MPL-B4540F-SJ22AA has a 130-millimeter frame, as well as a 4.0-inch magnetic stack. This servo motor operates at speeds of up to 3000 revolutions per minute. This product has a single-turn encoder for feedback. The MPL-B4540F-SJ22AA features a flange for mounting.

MPL-B4540F-SJ24AA

Produced by Allen-Bradley, product number MPL-B4540F-SJ24AA is an MP-series servo motor with low inertia and a 400-volt AC voltage rating. The frame of this motor measures 130 millimeters. Additionally, the magnetic stack measures four (4.0) inches. The rated speed of the MPL-B4540F-SJ24AA is 3000 rev/min. This product features a single-turn encoder, as well as a 24-volt DC brake.

MPL-B4540F-SJ72AA

Produced by Allen Bradley, the MPL-B4540F-SJ72AA is a low-inertia servo motor with a 460 VAC voltage rating. This servo motor has a 130-millimeter frame, as well as a 4.0-inch magnetic stack. The MPL-B4540F-SJ72AA operates at a speed rated at 3000 rpm. For feedback, this device features a dingle-turn high-resolution encoder.

MPL-B4540F-SJ74AA

The MPL-B4540F-SJ74AA from Allen Bradley is a low-inertia servo motor. This unit has a 400-volt AC voltage rating. This motor has a 130-millimeter frame, in addition to a 4.0-inch magnetic stack. This servo motor has a 3000 rpm rated speed. The MPL-B4540F-SJ74AA features a single-turn encoder for feedback purposes. This servo motor also features a 24-volt DC brake.

MPL-B4540F-SK22AA

The Allen Bradley MPL-B4540F-SK22AA is an MP-series servo motor with low inertia. The voltage rating of this motor is 400 volts alternating current (AC). The MPL-B4540F-SK22AA has a 130-millimeter frame, as well as a 4.0-inch-long magnetic stack. The speed at which this servo motor operates is rated as 3000 rev/min. This product is equipped with a single-turn encoder for feedback purposes. The MPL-B4540F-SK22AA can be mounted via a mounting flange.

MPL-B4540F-SK24AA

The MPL-B4540F-SK24AA low-inertia servo motor belongs to the MP series of Allen Bradley servo motors. This motor operates at speeds of 3000 rev/min. The MPL-B4540F-SK24AA features a single-turn encoder, a 24-volt DC brake, and an IEC metric mounting flange. This servo motor has a 130 mm frame and a 4.0 in. magnetic stack. The connectors of this device are circular bayonet connectors.

MPL-B4560F-MJ22AA

The MPL-B4560F-MJ22AA servo motor from Allen Bradley has low inertia and a 400-volt rating. This unit belongs to the MP servo motor series. The frame of the MPL-B4560F-MJ22AA measures 130 millimeters. Additionally, the magnetic stack of the MPL-B4560F-MJ22AA has a length measuring 6.0 inches. This motor operates at a 3000 rev/min rated speed. This servo motor features a multi-turn encoder with a high resolution. The MPL-B4560F-MJ22AA also has a shaft key and a circular bayonet as a connector.

MPL-B4560F-MJ24AA

Part number MPL-B4560F-MJ24AA from Allen Bradley is an MP-series low-inertia servo motor. This unit has a 400-volt rating, a 130-millimeter frame, and a 6.0-inch-long magnetic stack. The MPL-B4560F-MJ24AA operates at speeds rated up to 3000 rev/min. For feedback purposes, this motor features a multi-turn encoder. The MPL-B4560F-MJ24AA also features a 24-volt DC brake.

MPL-B4560F-MJ72AA

Product number MPL-B4560F-MJ72AA is an MP-series low-inertia servo motor. It was produced by Allen-Bradley. This unit belongs to the 400-volt class of servo motors. It has a 130-millimeter frame, along with a 6.0-inch-long magnetic stack. The rated operating speed of the MPL-B4560F-MJ72AA is 3000 rev/min. A multi-turn encoder has been integrated into the design of this servo motor.

MPL-B4560F-MJ74AA

Produced by Allen Bradley/Rockwell Automation, part number MPL-B4560F-MJ74AA is a servo motor from the MP series of products. This motor has a 400 volts AC voltage rating, as well as low inertia. It operates at a speed rated as three thousand revolutions per minute (3000 rpm). The MPL-B4560F-MJ74AA has a 130 mm frame and a 6.0 in. magnetic stack length. This servo motor can be mounted using the flange mount installed on the product.

MPL-B4560F-MK24AA

The MPL-B4560F-MK24AA from Allen Bradley is a low-inertia servo motor with a 400-volt rating. This unit belongs to the MP series of servo motors. The MPL-B4560F-MK24AA has a 130-millimeter frame, as well as a 6.0-inch magnetic stack. It features a multi-turn encoder for feedback. The MPL-B4560F-MK24AA has a 24-volt DC brake, and it may be mounted via the use of a mounting flange. This servo motor's rated operating speed rated is 3000 r/min.

MPL-B4560F-MK74AA

The MPL-B4560F-MK74AA servo motor from Allen Bradley has low inertia and a 400-volt AC voltage rating. The frame of this product measures 130 millimeters, and the magnetic stack measures six (6.0) inches. The operating speed of the MPL-B4560F-MK74AA is rated as 3000 rev/min. For feedback purposes, this motor features a multi-turn encoder. The MPL-B4560F-MK74AA also features a 24-volt DC brake.

MPL-B4560F-SJ22AA

Product number MPL-B4560F-SJ22AA is an MP-series servo motor with low inertia. This unit was produced by Allen Bradley. The MPL-B4560F-SJ22AA has a rated voltage of 400 volts. Additionally, this device operates at 3000 revolutions per minute (rev/min). It has a frame size of 130 millimeters, in addition to a magnetic stack length of six (6.0) inches. For feedback purposes, the MPL-B4560F-SJ22AA includes a single-turn encoder.

MPL-B4560F-SJ72AA

Catalog number MPL-B4560F-SJ72AA is an Allen Bradley low-inertia servo motor with a 400-volt rating. This unit belongs to the MP series of servo motors. The frame size of the MPL-B4560F-SJ72AA measures 130 millimeters. Additionally, the magnetic stack of this servo motor measures six (6.0) inches. This product operates at speeds rated as 3000 rev/min. For feedback purposes, the MPL-B4560F-SJ72AA features a single-turn encoder with high resolution.

MPL-B4560F-SJ74AA

Manufactured by Allen Bradley, product number MPL-B4560F-SJ74AA is a low-inertia servo motor with a 400-volt rating. This motor has a 130 mm frame and a 6.0 in. magnetic stack length. The speed of the MPL-B320P-MJ22AA is rated up to 3000 revolutions per minute. This servo motor utilizes a single-turn encoder with high resolution for feedback. The MPL-B320P-MJ22AA can be mounted via a flange mount.

MPL-B520K-MJ22AA

Manufactured by Allen-Bradley, part number MPL-B520K-MJ22AA is a 400-volt servo motor with low inertia. The MPL-B520K-MJ22AA has a 165-millimeter frame, in addition to a 2.0-inch-long magnetic stack. This servo motor has a 4000 rev/min speed rating. This unit includes a high-resolution encoder that provides feedback in multiple turns. It has circular bayonet connectors and a flange for mounting.

MPL-B520K-MJ24AA

The MPL-B520K-MJ24AA MP-series servo motor from Allen Bradley has low inertia and a 400 VAC voltage rating. This unit has a 165-millimeter frame, in addition to a 2.0-inch-long magnet stack. The MPL-B520K-MJ24AA can operate at speeds rated up to 4000 rev/min. For feedback purposes, this servo motor features a multi-turn encoder. It has circular bayonet connectors. The MPL-B520K-MJ24AA also has a brake rated at 24 volts DC.

MPL-B520K-MJ72AA

Product number MPL-B520K-MJ72AA is a low-inertia servo motor from Allen-Bradley/Rockwell Automation. This device has a 400-volt rating. The MPL-B520K-MJ72AA has a 165-millimeter frame, in addition to a 2.0-inch-long frame. This servo motor can operate at speeds rated at 4000 rev/min. For feedback purposes, the MPL-B520K-MJ72AA features a multi-turn encoder.

MPL-B520K-MJ74AA

Catalog number MPL-B520K-MJ74AA is an Allen Bradley servo motor from the MP series of products. It has a 400 VAC voltage rating and low inertia. The MPL-B520K-MJ74AA's frame measures 165 millimeters, and its magnetic stack measures 2.0 inches. The speed at which this servo motor operates is rated at 4000 r/min. The MPL-B520K-MJ74AA includes a multi-turn encoder for feedback, as well as a flange for mounting. This motor has circular DIN connectors and a 24 VDC brake.

MPL-B520K-MK22AA

The Allen Bradley MPL-B520K-MK22AA is a low-inertia servo motor with a voltage rating of 400 volts. This device has a 165-millimeter frame. It also has a 2.0-inch magnet stack. The rated speed of the MPL-B520K-MK22AA servo motor is 4000 rev/min. This motor utilizes a high-resolution encoder to provide feedback in multiple turns.

MPL-B520K-MK24AA

Part number MPL-B520K-MK24AA is an MP-series servo motor manufactured by Allen Bradley. This device has low inertia and a voltage rating of 400 VAC. The frame of this product measures 165 millimeters, and its magnet stack measures 2.0 inches. The speed at which this motor can operate is rated up to 4000 rev/min. The MPL-B520K-MK24AA has circular bayonet connectors and a 24 VDC brake.

MPL-B520K-MK72AA

Catalog number MPL-B520K-MK72AA is a low-inertia servo motor designed by Allen Bradley. This unit has a 400 VAC voltage rating, as well as a 4000 rev/min speed rating. This motor has a 165-millimeter frame and a 2.0-inch-long magnet stack. For feedback purposes, the MPL-B520K-MK72AA features a multi-turn high-resolution encoder. This unit has circular DIN connectors and a mounting flange.

MPL-B520K-MK74AA

Product number MPL-B520K-MK74AA from Allen Bradley is an MP-series servo motor. This unit has low inertia and a 400-volt AC-rated voltage. The frame of this motor measures 165 millimeters. Additionally, its magnet stack measures 2.0 inches. This servo motor can operate at speeds of up to 4000 rev/min. For feedback purposes, the MPL-B520K-MK74AA features a multi-turn encoder. This unit has circular DIN connectors and a 24-volt DC brake.

MPL-B520K-SJ22AA

Product number MPL-B520K-SJ22AA is an Allen-Bradley servo motor. This device has a voltage rating of 400 volts alternating current (AC), and it has low inertia. The MPL-B520K-SJ22AA's frame measures 165 millimeters. Additionally, the magnetic stack of this motor measures 2.0 inches. The speed at which the MPL-B520K-SJ22AA operates is rated at 4000 rpm. This servo motor includes a single-turn encoder, circular bayonet connectors, and a mounting flange.

MPL-B520K-SJ24AA

Catalog number MPL-B520K-SJ24AA is a low-inertia servo motor produced by Allen Bradley. This device has a 400-volt alternating current (AC) voltage rating. It also has a 4000 r/min speed rating. The frame of this motor measures 165 mm, and the magnet stack measures 2.0 in. For feedback purposes, the MPL-B520K-SJ24AA features a single-turn encoder. This servo motor also features a 24-volt direct current (DC) brake and a mounting flange.

MPL-B520K-SJ72AA

Part number MPL-B520K-SJ72AA is a low-inertia servo motor. It was manufactured by Allen-Bradley/Rockwell Automation as part of the MP series of servo motors. The voltage rating of this motor is 400 VAC. The MPL-B520K-SJ72AA has a 165 mm frame and a 2.0 in. long magnetic stack. The operational speed of this servo motor is 4000 rev/min. This unit features a single-turn encoder, as well as circular DIN connectors. The MPL-B520K-SJ72AA can be mounted using a flange mount.

MPL-B520K-SJ74AA

Part number MPL-B520K-SJ74AA from Allen Bradley is a low-inertia servo motor. This unit has a voltage rating of 400 VAC and a speed rating of 4000 rpm. The frame of the MPL-B520K-SJ74AA measures 165 millimeters, and its magnetic stack measures 2.0 inches. This servo motor features a single-turn encoder for feedback purposes, in addition to a flange for mounting purposes. The MPL-B520K-SJ74AA is equipped with a brake rated at 24 VDC.

MPL-B520K-SK22AA

Manufactured by Allen-Bradley, part number MPL-B520K-SK22AA is a low-inertia servo motor with a 400-volt AC voltage rating. This device has a 165-millimeter frame, in addition to a 2.0-inch magnet stack length. The rated speed of the MPL-B520K-SK22AA is 4000 rev/min. It features a single-turn encoder for feedback, as well as a flange for mounting.

MPL-B520K-SK24AA

Catalog number MPL-B520K-SK24AA is a low-inertia servo motor from Allen-Bradley. This motor belongs to the MP series of servo motors. This product has a 165-millimeter frame and a 2.0-inch magnet stack length. The MPL-B520K-SK24AA has a 400-volt alternating current (AC) voltage rating, as well as a 4000 rev/min speed rating. This unit is equipped with a single-turn encoder for feedback purposes. The MPL-B520K-SK24AA features circular bayonet connectors and a 24-volt direct current (DC) brake. This servo motor can be mounted through the use of a mounting flange.

MPL-B520K-SK72AA

Designed by Allen-Bradley, product number MPL-B520K-SK72AA is a low-inertia servo motor with a voltage rating of 400 volts alternating current (AC). This unit was designed to be part of the MP series of Allen-Bradley servo motors. The MPL-B520K-SK72AA has a 165 mm frame, in addition to a 2.0 in. magnet stack length. This servo motor operates at speeds rated up to 4000 r/min. A single-turn encoder has been integrated into the design architecture of the MPL-B520K-SK72AA. It features circular DIN connectors and a mounting flange.

MPL-B520K-SK74AA

Manufactured by Allen-Bradley, product number MPL-B520K-SK74AA is a low-inertia servo motor with a 400-volt rating. The speed rating of this motor is 4000 rev/min. It has a 165-millimeter frame, as well as a 2.0-inch magnet stack length. This product has a single-turn high-resolution encoder, a 24-volt DC brake, and an IEC metric mounting flange. The connectors of this servo motor are classified as circular DIN connectors. The MPL-B520K-SK74AA is suitable for use in motion control applications.

MPL-B540D-MJ24AA

Produced by Allen-Bradley, part number MPL-B540D-MJ24AA is an MP-series servo motor with low inertia. This motor has a 400 VAC voltage rating, as well as a 2000 rpm speed rating. This servo motor has a 165-millimeter frame and a 4.0-inch magnet stack. The MPL-B540D-MJ24AA contains a multi-turn encoder for feedback purposes. This motor has circular bayonet connectors and a 24 VDC brake. This product can be mounted via the use of a mounting flange.

MPL-B540D-MJ74AA

Catalog number MPL-B540D-MJ74AA is an Allen Bradley MP-series servo motor with a 400-volt rating. This servo motor has a 165-millimeter frame and a 4.0-inch long magnetic stack. The speed that this motor operates at is rated as 2000 rpm. The MPL-B540D-MJ74AA is equipped with a multi-turn encoder. It also has a shaft key, a circular DIN connector, and a 24-volt DC brake. The mounting flange installed on this device is an IEC metric flange.
Previous 1

...

8

9

10

...

12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP