GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-B540D-SJ22AA

Part number MPL-B540D-SJ22AA is a servo motor with low inertia and a 400-volt rating. This unit is a part of the MP series of Allen Bradley servo motors. The frame of the MPL-B540D-SJ22AA measures 63 millimeters, and its magnet stack measures 4.0 inches. This servo motor has a rated speed of 2000 rev/min. The MPL-B540D-SJ22AA has an integrated high-resolution encoder that is utilized to provide feedback in a single turn.

MPL-B540D-SJ24AA

The MPL-B540D-SJ24AA servo motor from Allen-Bradley has low inertia and a voltage rating of 400 volts. This product has a 165 mm frame and a 4.0 in. magnet stack length. The MPL-B540D-SJ24AA operates at speeds rated up to 2000 r/min. For feedback purposes, this servo motor features a single-turn encoder. The MPL-B540D-SJ24AA has circular bayonet connectors and a flange for mounting.

MPL-B540D-SJ74AA

Product number MPL-B540D-SJ74AA from Allen Bradley is a low-inertia servo motor. This device has a 400-volt rating. The MPL-B540D-SJ74AA has a 165-millimeter frame, as well as a 4.0-inch magnet stack. This servo motor operates at speeds of up to 2000 rev/min. The MPL-B540D-SJ74AA includes a single-turn encoder for feedback purposes. Features of this low-inertia servo motor include circular DIN connectors, a mounting flange, and a 24-volt direct current (DC) brake.

MPL-B540K-MJ22AA

Catalog number MPL-B540K-MJ22AA, which was manufactured by Allen-Bradley, is an MP-series 400-volt low-inertia servo motor. This product has a 165-millimeter frame, as well as a magnetic stack length of four inches. The MPL-B540K-MJ22AA's rated speed is 4000 rev/min. This servo motor includes a high-resolution encoder that provides feedback within multiple turns. The connectors of the MPL-B540K-MJ22AA servo motor are circular bayonet connectors.

MPL-B540K-MJ24AA

Product number MPL-B540K-MJ24AA is an Allen Bradley servo motor belonging to the MP series of products. This motor has low inertia and a 400-volt rating. The frame of this servo motor measures 165 millimeters. Additionally, the magnetic stack of the MPL-B540K-MJ24AA measures four (4.0) inches. An integrated multi-turn encoder is part of the MPL-B540K-MJ24AA, and it is used to provide feedback. This servo motor includes a 24 VDC brake.

MPL-B540K-MJ72AA

The Allen-Bradley MPL-B540K-MJ72AA servo motor is part of the MP series of products. This unit has a 400-volt AC voltage rating, in addition to low inertia. The frame of this servo motor measures 165 millimeters, along with a magnetic stack length of four inches. The rated operating speed of the MPL-B540K-MJ72AA is 4000 revolutions per minute. For feedback purposes, this motor is equipped with a multi-turn encoder. The MPL-B540K-MJ72AA may be mounted through the use of a mounting flange.

MPL-B540K-MJ74AA

Part number MPL-B540K-MJ74AA is an Allen Bradley MP-series servo motor with low inertia. This product has a 400-volt AC voltage rating, as well as a 165-millimeter frame and a 4.0-inch-long magnetic stack. This servo motor operates at speeds of up to 4000 revolutions per minute. For feedback purposes, the MPL-B540K-MJ74AA features a multi-turn encoder. This unit also includes a brake rated at 24 volts DC.

MPL-B540K-MK22AA

Manufactured by Allen-Bradley, part number MPL-B540K-MK22AA is a low-inertia servo motor. This unit belongs to the MP series of Allen Bradley servo motors. Additionally, it has a voltage rating of 400 volts. The MPL-B540K-MK22AA's frame measures 165 millimeters, and the magnetic stack measures four (4.0) inches. This servo motor features a multi-turn encoder for feedback purposes. The MPL-B540K-MK22AA can be mounted via the use of a mounting flange.

MPL-B540K-MK24AA

Catalog number MPL-B540K-MK24AA is an MP-series low-inertia servo motor produced by Allen Bradley. This motor has a 400-volt rating. The frame of this motor measures 165 millimeters, and its magnetic stack has a length that measures 4.0 inches. The MPL-B540K-MK24AA operates at a 4000 rev/min rated speed. This device has a multi-turn encoder for feedback purposes. It also has an IEC metric flange so that it may be mounted.

MPL-B540K-MK72AA

Catalog number MPL-B540K-MK72AA is a 400-volt servo motor from the MP-series of servo motors. It was designed and produced by Allen Bradley / Rockwell Automation. The speed that this motor operates at is rated as 4000 r/min. The frame of the MPL-B540K-MK72AA measures 165 millimeters, and its magnetic stack measures 4.0 inches long. This Allen Bradley servo motor has a circular DIN connector that is orientated at a right angle and can rotate 180 degrees.

MPL-B540K-MK74AA

Manufactured by Allen Bradley/Rockwell Automation, catalog number MPL-B540K-MK74AA is a servo motor with low inertia and a 460-volt AC voltage rating. This unit has a 165-millimeter frame, as well as a 4.0-inch magnetic stack length. Four thousand revolutions per minute (4000 rpm) is the speed at which this product operates. The MPL-B540K-MK74AA features a 24-volt DC brake. It can be mounted via a flange mount.

MPL-B540K-SJ22AA

Catalog number MPL-B540K-SJ22AA is a low-inertia servo motor. It was produced by Allen-Bradley/Rockwell Automation. This unit has a 400-volt alternating current (AC) rated voltage. In addition, the MPL-B540K-SJ22AA operates at a rated speed of 4000 rev/min. For feedback purposes, this motor has a single-turn encoder. The connectors of this unit, which are circular bayonet connectors, are positioned so that they face the shaft.

MPL-B540K-SJ24AA

The Allen Bradley MPL-B540K-SJ24AA is a low-inertia servo motor from the MP series of products. This motor operates via a 460-volt AC voltage. The MPL-B540K-SJ24AA has a 165-millimeter frame and a 4-inch magnetic stack length. This servo motor features a 24-volt DC brake and a single-turn encoder for feedback. This product operates at speeds rated up to 4000 revolutions per minute.

MPL-B540K-SJ72AA

Designed and produced by Allen Bradley, part number MPL-B540K-SJ72AA is an MP-series servo motor. This unit has low inertia and a 400-volt rating. This unit has a 165-millimeter frame, in addition to a 4.0-inch magnetic stack length. The operating speed of this servo motor is rated as 4000 revolutions per minute. The MPL-B540K-SJ72AA can be mounted via the use of an IEC metric mounting flange.

MPL-B540K-SJ74AA

Part number MPL-B540K-SJ74AA is a 400-volt servo motor. Manufactured by Allen-Bradley, this unit belongs to the MP series of servo motors. In addition, this unit has a 4000 rev/min rated speed. The MPL-B540K-SJ74AA has a 165-millimeter frame, as well as a 4.0-inc magnetic stack length. For feedback purposes, this Allen Bradley product integrates a single-turn high-resolution encoder into its design.

MPL-B540K-SK22AA

The MPL-B540K-SK22AA from Allen Bradley is an MP-series servo motor with low inertia and a 400-volt rating. The speed at which this unit operates is 4000 revolutions per minute. The MPL-B540K-SK22AA has a 165-millimeter frame. It also has a 4.0-inch magnetic stack length. This device features a single-turn encoder with high resolution for feedback. The MPL-B540K-SK22AA even has circular bayonet connectors that are positioned in a way that they are facing the shaft.

MPL-B540K-SK24AA

Part number MPL-B540K-SK24AA is a lo-inertia servo motor from Allen-Bradley's MP series of servo motors. This unit has a 400-volt rating. The frame of the MPL-B540K-SK24AA measures 165 millimeters. Additionally, the magnetic stack of this servo motor has a length that measures 4.0 inches. This servo motor features circular bayonet connectors, as well as a 24-volt DC brake. The MPL-B540K-SK24AA may be mounted via a mounting flange.

MPL-B540K-SK72AA

Product number MPL-B540K-SK72AA is a low-inertia servo motor from Allen Bradley. This unit belongs to the MP series of servo motors. It has a 165-millimeter frame and a 4.0-inch-long magnetic stack. The voltage rating of the MPL-B540K-SK72AA is 400 volts, and the speed rating is 4000 revolutions per minute. The MPL-B540K-SK72AA has circular DIN connectors that are positioned at a 90-degree angle. Additionally, these connectors may be rotated up to 180 degrees.

MPL-B540K-SK74AA

The MPL-B540K-SK74AA, which was produced by Allen-Bradley, is an MP-series low-inertia servo motor. This device has a 400-volt voltage rating. It also has a 4000 rpm speed rating. The frame of the MPL-B540K-SK74AA measures 165 millimeters, while the magnetic stack length measures 4.0 inches. This servo motor features a single-turn encoder with high resolution. The MPL-B540K-SK74AA also features a 24-volt DC brake. Users may mount this servo motor via a flange mount.

MPL-B560F-MJ22AA

Catalog number MPL-B560F-MJ22AA is a low-inertia servo motor from Allen Bradley's MP series of servo motors. The voltage rating of this unit is 400 volts, and its speed rating is 3000 rev/min. The MPL-B560F-MJ22AA has a 165-millimeter frame, as well as a 6.0-inch magnetic stack length. For feedback purposes, this servo motor features a multi-turn high-resolution encoder. The MPL-B560F-MJ22AA may be mounted via the use of a flange mount.

MPL-B560F-MJ72AA

The MPL-B560F-MJ72AA servo motor is an MP-series low-inertia servo motor designed by Allen-Bradley. It has a power rating of 430 volts AC. This servo motor has a 165-millimeter frame. The MPL-B560F-MJ72AA operates at 3000 revolutions per minute. For feedback, this unit features an integrated multi-turn encoder.

MPL-B560F-MJ74AA

The MPL-B560F-MJ74AA from Allen Bradley is an MP-series servo motor with low inertia. The voltage rating of this device is 460 volts AC. Additionally, the speed rating of the MPL-B560F-MJ74AA is 3000 revolutions per minute. This servo motor has a 165 mm frame, in addition to a 6.0-inch magnetic stack. Integrated into the design of this servo motor is a 24-volt DC brake. The MPL-B560F-MJ74AA has the option of being mounted via a flange mount.

MPL-B560F-MK22AA

Product number MPL-B560F-MK22AA is an MP-series low-inertia servo motor produced by Allen Bradley. This unit has a 460-volt AC voltage rating. It also has a speed rating of 3000 r/min. The frame of the MPL-B560F-MK22AA is 165 millimeters, and its magnetic stack has a length of 6.0 inches. This servo motor features a multi-turn high-resolution encoder for feedback. However, the MPL-B560F-MK22AA does not have a shaft seal, shaft key, or brake. The MPL-B560F-MK22AA may be mounted via a flange mount.

MPL-B560F-MK72AA

Product number MPL-B560F-MK72AA is an Allen Bradley MP-series servo motor with low inertia. This is a 400-volt motor with a speed rating of 3000 revolutions per minute. It has a 165-millimeter frame. The MPL-B560F-MK72AA also has a 6.0-inch magnetic stack length. For feedback, this servo motor includes a multi-turn encoder with a high resolution. The connectors of the MPL-B560F-MK72AA consist of circular DIN connectors. This unit may be mounted with a flange mount.

MPL-B560F-MK74AA

Part number MPL-B560F-MK74AA is an Allen Bradley servo motor. This product has low inertia and belongs to the MP series of servo motors. The voltage rating of this device is 400 volts, and the speed rating is 3000 rpm. The MPL-B560F-MK74AA has a 165-millimeter shaft, in addition to a 6.0-inch-long magnetic stack. For feedback purposes, this servo motor includes a multi-turn high-resolution encoder. Also included in this unit is a 24-volt DC brake. The MPL-B560F-MK74AA can be mounted with a flange mount.

MPL-B560F-SJ22AA

The MPL-B560F-SJ22AA low-inertia servo motor was designed by Allen Bradley. Additionally, it is part of the MP series of Allen Bradley servo motors. This unit has a 400-volt rating and a 3000 rev/min speed rating. The frame of the MPL-B560F-SJ22AA is 165 millimeters, and the magnetic stack length is 6.0 inches. This servo motor includes circular bayonet connectors that are positioned so that they are facing the shaft. The MPL-B560F-SJ22AA can be mounted via the use of a flange mount.

MPL-B560F-SJ24AA

Manufactured by Allen Bradley, product number MPL-B560F-SJ24AA is an MP-series servo motor. It has a 400-volt rating, as well as low inertia. The MPL-B560F-SJ24AA has a 165-millimeter frame size and a 6.0-inch magnetic stack length. The MPL-B560F-SJ24AA operates at a maximum speed of 3000 revolutions per minute. A 24-volt DC brake has been integrated into the design of this servo motor. The MPL-B560F-SJ24AA can be mounted via the use of a flange mount.

MPL-B560F-SJ72AA

Part number MPL-B560F-SJ72AA is an AC servo motor with low inertia. It was manufactured by Allen Bradley, and it belongs to the MP servo motor series. The MPL-B560F-SJ72AA has a 400-volt rating. The frame of this product measures 165 millimeters, and its magnetic stack measures 6.0 inches. The speed rating of the MPL-B560F-SJ72AA is 3000 rev/min. It has a single-turn encoder for feedback purposes. The connectors of this servo motor are circular DIN connectors.

MPL-B560F-SJ74AA

The MPL-B560F-SJ74AA low-inertia servo motor was designed and produced by Allen Bradley/Rockwell Automation. This unit has a voltage rating of 400 VAC. It has a frame size of 165 millimeters, as well as a 6.0-inc magnetic stack length. This unit operates at speeds rated as 3000 rev/min. The MPL-B560F-SJ74AA is equipped with a single-turn encoder with a high resolution. By utilizing the flange mount that is integrated with this servo motor, the MPL-B560F-SJ74AA is capable of being mounted.

MPL-B580F-MJ22AA

The MPL-B580F-MJ22AA servo motor has low inertia. This product was produced by Allen Bradley/Rockwell Automation. Additionally, the MPL-B580F-MJ22AA is part of the MPL servo motor series. This motor's voltage rating is 460 VAC. It has a 165 mm frame, as well as an 8.0 in. magnetic stack length. The maximum operating speed of the MPL-B580F-MJ22AA is rated as 3000 revolutions per minute. This unit has circular bayonet connectors. This motor can be mounted via a flange mount.

MPL-B580F-MJ24AA

Product number MPL-B580F-MJ24AA is an Allen Bradley servo motor from the MP series. This unit has a 400-volt rating and operates at 3000 revolutions per minute. The MPL-B580F-MJ24AA's frame measures 165 millimeters, and its magnetic stack has a length of eight (8.0) inches. This product features a high-resolution encoder that provides absolute position feedback in multiple turns. The MPL-B580F-MJ24AA also features a 24-volt DC brake. This servo motor is generally used in motion control applications.

MPL-B580F-MJ72AA

Manufactured by Allen Bradley, the MPL-B580F-MJ72AA servo motor belongs to the MP series of products. This product is a low-inertia servo motor with a rated voltage of 400 volts AC and a rated speed of 3000 rpm. The MPL-B580F-MJ72AA features an integrated encoder that provides feedback in multiple turns. It has circular DIN connectors, as well as an IEC metric mounting flange.

MPL-B580F-MJ74AA

Catalog number MPL-B580F-MJ74AA is a low-inertia servo motor from Allen Bradley. This unit, which belongs to the MP series of servo motors, has a 400-volt rating. The frame of the MPL-B580F-MJ74AA measures 165 millimeters. Additionally, the length of the magnetic stack measures 8.0 inches. Three thousand (3000) rev/min is the speed rating of this motor. The MPL-B580F-MJ74AA can be mounted with a mounting flange.

MPL-B580F-RJ22AA

Produced by Allen Bradley, product number MPL-B580F-RJ22AA is a servo motor with low inertia and a voltage rating of 400 volts. This unit has a frame size of 165 millimeters. It also has a magnetic stack length of 8.0 inches. The operating speed of the MPL-B580F-RJ22AA servo motor is 3000 revolutions per minute. This servo motor feature a 2-pole resolver and circular bayonet connectors.

MPL-B580F-SJ22AA

Designed and produced by Allen Bradley/Rockwell Automation, product number MPL-B580F-SJ22AA is a low-inertia servo motor with a 400-volt rating. This unit has a 165-millimeter frame, as well as an 8.0-inch magnetic stack length. The speed at which the MPL-B580F-SJ22AA operates is a maximum of 3000 revolutions per minute. This servo motor is capable of being mounted through the use of a flange mount.

MPL-B580F-SJ24AA

Manufactured by Allen-Bradley / Rockwell Automation, catalog number MPL-B580F-SJ24AA is a low-inertia servo motor from the MP series. This unit has a voltage rating of 400 volts. The frame of this device measures 165 millimeters, and the magnetic stack length measures 8.0 inches. The MPL-B580F-SJ24AA operates at a speed rated at 3000 revolutions per minute. This unit has an integrated brake with a voltage rating of 24 volts DC. The preferred mounting method of the MPL-B580F-SJ24AA is via a flange mount.

MPL-B580F-SJ72AA

Produced by Allen Bradley, part number MPL-B580F-SJ72AA is a low-inertia servo motor with a 215-millimeter frame. Its voltage rating is 230 volts AC. The MPL-B580F-SJ72AA operates at 3000 rev/min. It has circular DIN connectors and an eight-inch-long magnetic shaft. For feedback purposes, the MPL-B580F-SJ72AA features a single-turn encoder with high resolution.

MPL-B580F-SJ74AA

Manufactured by Allen Bradley, catalog number MPL-B580F-SJ74AA is a servo motor with low inertia and a 400-volt voltage rating. This unit belongs to the MP series of servo motors. The MPL-B580F-SJ74AA has a 165-millimeter frame and an 8.0-inch magnetic stack length. The operating speed of this servo motor is rated as 3000 revolutions per minute. The MPL-B580F-SJ74AA includes a 24-volt DC brake. It can be mounted via a mounting flange.

MPL-B580J-MJ22AA

Product number MPL-B580J-MJ22AA is an MP-series servo motor. Some key aspects of this motor include its low inertia and 400-volt voltage rating. This is an MP-series motor with a 3750 rpm rated speed. The MPL-B580J-MJ22AA has a frame that measures 165 millimeters. Additionally, the magnetic stack length of the MPL-B580J-MJ22AA measures 8.0 inches. This servo motor can be mounted via a mounting flange.

MPL-B580J-MJ24AA

Designed and produced by Allen Bradley, product number MPL-B580J-MJ24AA is a 400-volt low-inertia servo motor from the MP series. It has a frame measuring 165 millimeters, as well as a magnetic stack with a length measuring 8.0 inches. The MPL-B580J-MJ24AA can operate at speeds rated up to 3750 rev/min. This unit utilizes a multi-turn encoder with high resolution for feedback purposes. This servo motor incorporates a 24-volt DC brake into its design.

MPL-B580J-MJ72AA

Catalog number MPL-B580J-MJ72AA is an Allen Bradley servo motor. This motor has low inertia, as well as a 460 VAC voltage rating. The MPL-B580J-MJ72AA has a 165-millimeter frame, in addition to an 8.0-inch long magnetic stack. This unit operates at a speed of 3750 rev/min. This product has a circular DIN connector. This connector is orientated at a 90-degree angle, and it can be rotated up to 180 degrees.

MPL-B580J-MJ74AA

Manufactured by Allen Bradley, product number MPL-B580J-MJ74AA is a low-inertia servo motor with a voltage rating of 400 volts. This unit has a rated operational speed of 3750 rev/min. For feedback purposes, this device includes a multi-turn encoder. It has circular DIN connectors and a 24-volt direct current (DC) brake. The MPL-B580J-MJ74AA can be mounted through the use of a mounting flange.

MPL-B580J-MK22AA

Designed and produced by Allen Bradley, part number MPL-B580J-MK22AA is a servo motor. This product belongs to Allen Bradley's MP series of servo motors, and it has low inertia. The MPL-B580J-MK22AA has a 400V rating. The rated speed of this motor is 3750 rev/min. This servo motor has a 165-millimeter frame size, as well as an 8.0-inch-long magnetic stack. The MPL-B580J-MK22AA servo motor takes advantage of a multi-turn high-resolution encoder for feedback purposes. The preferred mounting method for this motor is via a flange mount.

MPL-B580J-MK24AA

Produced by Allen Bradley, catalog number MPL-B580J-MK24AA is a servo motor. This motor has low inertia and a voltage rating of 400 volts. The frame size of the MPL-B580J-MK24AA is165 millimeters. Additionally, the magnetic stack length is 8.0 inches. The MPL-B580J-MK24AA servo motor is capable of operating at speeds rated up to 3750 rev/min. This product has a multi-turn high-resolution encoder for feedback purposes. Additionally, the MPL-B580J-MK24AA is equipped with a 24-volt DC brake.

MPL-B580J-MK72AA

Product number MPL-B580J-MK72AA is a servo motor that was designed and produced by Allen Bradley. This unit has low inertia and a 400V rating. It also belongs to the MP series of servo motors. The MPL-B580J-MK72AA has a rated speed of 3750 revolutions per minute. The frame of this product measures 165 millimeters, and the length of the magnetic stack measures 8.0 inches. For feedback purposes, there is a multi-turn encoder with high resolution integrated into the design of the MPL-B580J-MK72AA.

MPL-B580J-MK74AA

Designed and produced by Allen Bradley, catalog number MPL-B580J-MK74AA is an MP-series servo motor. This unit has low inertia, as well as a 400V rating. The frame of this motor measures 165 millimeters, and the magnetic stack length measures 8.0 inches. The MPL-B580J-MK74AA can operate at speeds rated up to 3750 rev/min. This product includes a brake with a voltage rating of 24 volts DC. It can be mounted with a flange mount.

MPL-B580J-SJ22AA

Catalog number MPL-B580J-SJ22AA is an Allen Bradley MP-series servo motor with low inertia. This unit belongs to the 400-volt class of servo motors. The MPL-B580J-SJ22AA has a 165 mm frame and an 8.0 in. magnetic stack length. The rated operating speed of this product is 3750 rpm. For feedback, the MPL-B580J-SJ22AA includes a single-turn encoder with high resolution. This device can be mounted via the use of a mounting flange.

MPL-B580J-SJ24AA

Produced by Allen Bradley / Rockwell Automation, part number MPL-B580J-SJ24AA is a rotary servo motor with low inertia. It is part of the MP series of servo motors manufactured by Allen Bradley. This unit has a frame measuring 165 millimeters, in addition to a magnetic stack with a length measuring 8.0 inches. The rated speed of the MPL-B580J-SJ24AA is 3750 r/min. It has an integrated single-turn encoder, as well as a 24-volt DC brake. Mounting may be accomplished by using a flange mount.

MPL-B580J-SJ72AA

Product number MPL-B580J-SJ72AA is an MP-series low-inertia servo motor that was produced by Allen Bradley / Rockwell Automation. This unit belongs to the 400V class of MP-series servo motors. The speed of the MPL-B580J-SJ72AA is rated as 3750 r/min. It has a single-turn encoder with high resolution for feedback. This motor does not have brakes built into its design.

MPL-B580J-SJ74AA

Produced by Allen Bradley, catalog number MPL-B580J-SJ74AA is a 400-volt servo motor with low inertia. The frame of this unit measures 165 millimeters. Additionally. the length of the MPL-B580J-SJ74AA's magnetic shaft measures 8.0 inches. The speed of this Allen Bradley product is rated as 3750 rev/min. The MPL-B580J-SJ74AA has a single-turn high-resolution encoder for feedback purposes.
Previous 1

...

9 10 11 12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP