GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-B580J-SK22AA

Manufactured by Allen Bradley, product number MPL-B580J-SK22AA is a low-inertia servo motor with a 400-volt rating. The operational speed of this unit is rated at 3750 rpm. The MPL-B580J-SK22AA has a 165-millimeter frame, as well as an 8.0-inch magnetic stack length. This device has a single-turn high-resolution encoder for feedback. This servo motor may be mounted via a mounting flange.

MPL-B580J-SK24AA

Part number MPL-B580J-SK24AA is a low-inertia servo motor from Allen Bradley's MP series. It has a voltage rating of 400 volts. The MPL-B580J-SK24AA also has a speed rating of 3750 r/min. The frame size of this motor measures 165 millimeters. Additionally, the magnetic stack of the MPL-B580J-SK24AA has a length measuring 8.0 inches. This servo motor includes a 24-volt DC brake.

MPL-B580J-SK72AA

The maximum speed of the MPL-B580J-SK72AA servo motor from Allen-Bradley is 3750 rpm. This device has a 165-millimeter frame size, circular DIN cable connections that can be rotated 180 degrees, and a single-turn encoder. However, a shaft key is not available with this servo motor. The power requirement for this brush-less servo motor is 230 volts AC. The MPL-B580J-SK72AA has no built-in braking system.

MPL-B580J-SK74AA

Part number MPL-B580J-SK74AA is a servo motor from Allen Bradley. This unit has a 400-volt rating, as well as low inertia. The frame of the MPL-B580J-SK74AA measures 165 millimeters. Additionally, the magnetic stack length of the MPL-B580J-SK74AA measures 8.0 inches. This low-inertia servo motor typically operates at speeds rated up to 3750 revolutions per minute (rpm). This Allen Bradley servo motor does not feature a shaft key, nor does it feature a shaft seal. The MPL-B580J-SK74AA does have a 24 VDC brake.

MPL-B640F-MJ22AA

Produced by Allen-Bradley/Rockwell Automation, product number MPL-B640F-MJ22AA is a 400V low-inertia servo motor from the MP series. This motor operates at speeds rated at 3000 rev/min. The frame size of the MPL-B640F-MJ22AA measures 215 millimeters, while the MPL-B640F-MJ22AA's magnetic stack measures 4.0 inches long. This device has a multi-turn encoder for feedback, as well as an IEC metric mounting flange.

MPL-B640F-SJ22AA

Product number MPL-B640F-SJ22AA is a low-inertia servo motor from Allen Bradley. This unit belongs to the MP series of servo motors, and it has a 400-volt rating. The speed of the MPL-B640F-SJ22AA is rated up to 3000 rev/min. For feedback purposes, this servo motor includes an integrated single-turn high-resolution encoder. The MPL-B640F-SJ22AA's frame measures 215 millimeters, and the magnetic stack has a length that measures 4.0 inches.

MPL-B640F-SJ24AA

Product number MPL-B640F-SJ24AA is a servo motor from Allen Bradley's MP servo motor series. This unit has a 400-volt rating and low inertia. The frame size of the MPL-B640F-SJ24AA is 215 mm. Additionally, its magnetic stack length is 4.0 in. long. The MPL-B640F-SJ24AA servo motor operates at speeds rated up to 3000 revolutions per minute. This unit features a single-turn encoder with high resolution for feedback purposes.

MPL-B640F-SJ72AA

Produced by Allen Bradley / Rockwell Automation, the MPL-B640F-SJ72AA servo motor is an MP series product with a 400-volt voltage rating. The frame of this motor measures 215 millimeters, and its magnetic stack has a length that measures 4.0 inches. The MPL-B640F-SJ72AA operates at speeds rated up to 3000 revolutions per minute. This product features a single-turn encoder with high resolution. The mounting method suitable for this servo motor is via the use of a flange mount.

MPL-B660F-MJ22AA

Product number MPL-B660F-MJ22AA is a 400-volt AC servo motor with low inertia. It was designed and produced by Allen Bradley as part of the MP series of servo motors. This unit has a 215 mm frame, as well as a six-inch-long magnetic stack. The MPL-B660F-MJ22AA operates at 3000 revolutions per minute. Additionally, for feedback purposes, this motor includes a multi-turn encoder with high resolution. The MPL-B660F-MJ22AA has circular bayonet connectors that are positioned so that they face the motor's shaft. This servo motor may be mounted with the use of a mounting flange.

MPL-B660F-SJ22AA

Designed and produced by Allen Bradley, catalog number MPL-B660F-SJ22AA is an MP-series low-inertia servo motor. This device has a 400-volt rating, and it can operate at speeds of up to 3000 r/min. The frame of the MPL-B660F-SJ22AA measures 215 millimeters. In addition, the length of its magnetic stack measures 6.0 inches. This unit offers a single-turn encoder for feedback purposes.

MPL-B680D-SJ22AA

Catalog number MPL-B680D-SJ22AA is an MP-series servo motor. This motor has low inertia and a voltage rating of 400 volts. It has a 215-millimeter frame and an 8.0-inch-long magnetic stack. The speed at which this motor operates is rated up to 2000 revolutions per minute. The MPL-B680D-SJ22AA has an integrated single-turn high-resolution encoder for feedback purposes. It may be mounted via a mounting flange.

MPL-B680F-MJ22AA

Catalog number MPL-B680F-MJ22AA is a servo motor that was produced by Allen Bradley. This motor has low inertia and a 400-volt rating. The frame of the MPL-B680F-MJ22AA measures 215 millimeters, and its magnetic shaft measures 8.0 inches long. This Allen Bradley servo motor operates at a speed rated as 3000 revolutions per minute. The MPL-B680F-MJ22AA can be mounted via a flange mount.

MPL-B680F-MJ24AA

Part number MPL-B680F-MJ24AA was designed and produced by Allen Bradley. This product is a low-inertia servo motor with low inertia. It has a 215-millimeter frame, in addition to an 8.0-inch magnetic stack length. The MPL-B680F-MJ24AA can operate at speeds rated up to 3000 rev/min. This product utilizes a multi-turn high-resolution encoder for feedback. It also has a 24-volt DC brake.

MPL-B680F-SJ22AA

Manufactured by Allen-Bradley / Rockwell Automation, product number MPL-B680F-SJ22AA is an MP-series low-inertia servo motor. This motor has a frame size measuring 215 millimeters, in addition to having a magnetic stack length that measures 8.0 inches. The speed of the MPL-B680F-SJ22AA is rated as 3000 revolutions per minute (rpm). This motor is equipped with a single-turn encoder, a shaft key, and a circular bayonet.

MPL-B680H-SJ72AA

Manufactured by Allen Bradley, part number MPL-B680H-SJ72AA is a low-inertia servo motor from the MP series. It has a 400-volt rated voltage. The MPL-B680H-SJ72AA has a 215-millimeter frame, in addition to an 8.0-inch magnetic stack length. This unit features a single-turn high-resolution encoder that provides feedback. The MPL-B680H-SJ72AA may be mounted via a flange mount.

MPL-B860D-MJ72AA

Manufactured by Allen Bradley / Rockwell Automation, product number MPL-B860D-MJ72AA is a low-inertia servo motor. This motor belongs to the MP series of servo motors, and it has a 400-volt voltage rating. This unit has a 265-millimeter frame, in addition to a 6.0-inch-long magnetic stack. The speed at which the MPL-B860D-MJ72AA operates is rated up to 2000 revolutions per minute. This low-inertia servo motor can be mounted via the use of a mounting flange.

MPL-B980B-MJ22AA

Catalog number MPL-B980B-MJ22AA is an Allen Bradley low-inertia servo motor with a voltage rating of 400 volts. This device is part of the MP series of servo motors. It has a 300 mm frame and an 8.0 in. long magnetic stack. The speed at which this product performs is rated as 1000 revolutions per minute. The MPL-B980B-MJ22AA utilizes a multi-turn high-resolution encoder for feedback purposes. This unit can be mounted via the use of a mounting flange.

MPL-B980D-MJ22AA

Catalog number MPL-B980D-MJ22AA is an Allen Bradley servo motor belonging to the MP series. This unit has a 400-volt rating and low inertia. The frame of the MPL-B980D-MJ22AA servo motor measures 300 millimeters, and the length of the magnetic stack measures 8.0 inches. This motor operates at speeds rated up to 2000 rev/min. For feedback purposes, the MPL-B980D-MJ22AA features a multi-turn high-resolution encoder. This servo motor can be mounted using a mounting flange.

MPL-B980E-MJ22AA

Manufactured by Allen-Bradley, product number MPL-B980E-MJ22AA is a 400-volt servo motor with low inertia. It belongs to the MP series of servo motors from Allen Bradley. This unit has a 300 mm frame and an 8.0 in. magnetic stack length. The operating speed of the MPL-B980E-MJ22AA is rated up to 2500 r/min. A multi-turn high-resolution encoder, which provides feedback, is integrated into the design of this servo motor. The MPL-B980E-MJ22AA can be mounted via the use of a flange mount.

MPL-A220H-V-X251

Product number MPL-A220H-V-X251 is an Allen Bradley low-inertia servo motor. This unit has a 200-volt AC voltage rating and an IP50-rated enclosure. The output of this motor is rated as 0.6 kilowatts. The MPL-A220H-V-X251 operates at speeds of 3500 revolutions per minute. This servo motor has a 75-millimeter frame, in addition to a 2.0-inch magnetic stack length.

MPL-B330P-MJ22AA

Part number MPL-B330P-MJ22AA is a low-inertia servo motor. This device was manufactured by Allen Bradley as a part of the MP series of servo motors. This motor has a 400-volt rating. The frame size of the MPL-B330P-MJ22AA is 100 millimeters, while the length of its magnetic stack measures 3.0 inches. The rated speed of this servo motor is 5000 revolutions per minute. This motor is equipped with a multi-turn encoder for feedback.

MPL-B1510V-EJ72AA

Catalog number MPL-B1510V-EJ72AA is a servo motor with low inertia from Allen Bradley. This unit belongs to the MP series of servo motors, and it has a 400 VAC voltage rating. The MPL-B1510V-EJ72AA includes a 63-millimeter frame, a 1.0-inch magnet stack, and a maximum rated speed of 8000 revolutions per minute. A single-turn encoder has been integrated into the MPL-B1510V-EJ72AA for feedback purposes. This servo motor is capable of being mounted via the use of a flange mount.

MPL-B330P-MJ72AA

Product number MPL-B330P-MJ72AA is a 400-volt low-inertia servo motor from Allen Bradley. This motor belongs to the MP series of servo motors. The rated speed of this device is 5000 rev/min. The MPL-B330P-MJ72AA has a 100 mm frame, as well as a 3.0 in. magnetic stack length. For feedback, this servo motor includes a multi-turn encoder. The MPL-B330P-MJ72AA can be mounted via the use of a mounting flange.

MPL-B660F-MJ72AA

Product number MPL-B660F-MJ72AA is a 460 VAC low-inertia servo motor. Designed and manufactured by Allen Bradley, the MPL-B660F-MJ72AA is a part of the MP series. This servo motor has a 6.0-inch magnetic stack length, in addition to a 215-millimeter frame. The maximum rated speed of this device is 3000 rev/min. The MPL-B660F-MJ72AA has circular DIN connectors that are positioned at a right angle and are capable of 180-degree rotation.

MPL-B1520U-VJ72AA

Catalog number MPL-B1520U-VJ72AA is a low-inertia servo motor belonging to the MP series of Allen Bradley servo motors. It has a 400-volt rating. The frame of the MPL-B1520U-VJ72AA measures 63 millimeters, and its magnetic stack measures 2.0 inches. The operational speed of the MPL-B1520U-VJ72AA is 7000 rev/min. For feedback, this motor is equipped with a multi-turn high-resolution encoder.

MPL-B330P-MJ74AA

Part number MPL-B330P-MJ74AA is a 400-volt low-inertia servo motor. Manufactured by Allen Bradley, this unit belongs to the MP series of servo motors. It has a 100-millimeter frame size, as well as a 3.0-inch magnetic stack length. The speed of this motor is rated at 5000 rev/min. A multi-turn encoder with high resolution has been integrated into the MPL-B330P-MJ74AA's design. It can be mounted via the use of a flange mount.

MPL-B220T-EJ74AA

Produced by Allen Bradley / Rockwell Automation, part number MPL-B220T-EJ74AA is a 6000 rpm-rated servo motor with low inertia. This motor is part of the MP series of servo motors. Additionally, it has a 400-volt AC-rated voltage. The MPL-B220T-EJ74AA has a single-turn encoder for feedback purposes. This servo motor also features circular DIN connectors and a 24-volt DC brake. This servo motor is typically used in closed-loop applications.

MPL-B330P-MJ24AA

Catalog number MPL-B330P-MJ24AA is a low-inertia servo motor from Allen Bradley's MP series of servo motors. This motor is rated at 400 volts. It has a 5000 rpm rated speed, a 100-millimeter frame, and a 3.0-inch long magnetic stack. The multi-turn encoder installed in this servo motor is used for feedback. The MPL-B330P-MJ24AA has a shaft key, though it does not have a shaft seal. This servo motor also has a 24-volt DC brake integrated into its design.

MPL-B210V-VJ72AA

Catalog number MPL-B210V-VJ72AA is an Allen Bradley MP-series servo motor with a rated speed of 8000 r/min. This unit has low inertia and a voltage rating of 400 volts alternating current (AC). The MPL-B210V-VJ72AA servo motor's frame size is 75 millimeters. This unit includes a multi-turn encoder with high resolution. It also includes circular DIN connectors and a flange for mounting. However, the MPL-B210V-VJ72AA does not include a brake.

MPL-A1510V-VJ72AA

Catalog number MPL-A1510V-VJ72AA is a low-inertia servo motor. Manufactured by Allen Bradley, this unit belongs to the MP series of servo motors. The MPL-A1510V-VJ72AA has a 165-millimeter frame and a 200-volt alternating current (AC) voltage rating. The operating speed of this motor is 8000 revolutions per minute. The MPL-A1510V-VJ72AA features a multi-turn high-resolution encoder for feedback purposes, in addition to circular DIN connectors. This motor may be mounted via the use of a mounting flange.

MPL-A1510V-VJ74AA

Manufactured by Allen Bradley, part number MPL-A1510V-VJ74AA is an MP-series servo motor with low inertia. The voltage rating of this device is 200 volts AC. The MPL-A1510V-VJ74AA features a 24-volt DC brake and a multi-turn encoder for feedback purposes. This unit has a 63-millimeter frame, in addition to a 1.0-inch magnetic stack. The rated operational speed of this servo motor is 8000 revolutions per minute.

MPL-A1520U-VJ72AA

The MPL-A1520U-VJ72AA servo motor was produced by Allen Bradley, has low inertia, and has a 200-volt rating. The frame of this motor measures 63 millimeters. Additionally, the length of the magnetic stack measures 2.0 inches. The MPL-A1520U-VJ72AA has a 7000 rpm rated speed. For feedback purposes, this device has a multi-turn encoder. It also has a shaft key, a circular DIN connector, and an IEC metric mounting flange.

MPL-A1520U-VJ74AA

Produced by Allen Bradley, catalog number MPL-A1520U-VJ74AA is an MP-series servo motor. This unit has low inertia, in addition to a 400 VAC voltage rating. The MPL-A1520U-VJ74AA has a frame measuring 63 millimeters. Additionally, it has a magnetic stack measuring 2.0 inches. The MPL-A1520U-VJ74AA operates at speeds rated up to 7000 r/min. This servo motor features a multi-turn encoder, a 24 VDC brake, a mounting flange, and circular DIN connectors.

MPL-A1530F-V-X205

The Allen-Bradley MPL-A1530F-V-X205 is a replacement motor for Kinetix MPAR electric cylinders. This product has a voltage rating of 200 volts. The MPL-A1530F-V-X205 has a power rating of 0.26 kilowatts. Additionally, the speed rating of this product is 3150 rev/min. This unit has a 32-millimeter frame and a 3.0-inch magnetic stack. For feedback purposes, the MPL-A1530F-V-X205 is equipped with a 2000-line encoder.

MPL-A1530U-EJ72AA

Part number MPL-A1530U-EJ72AA is a low-inertia servo motor. The voltage rating of this product is 200 volts. It has a frame that measures 63 millimeters, as well as a magnet stack that measures 3.0 inches. The MPL-A1530U-EJ72AA servo motor operates at speeds rated up to 7000 rpm. For feedback purposes, this product features a single-turn encoder. Other features of the MPL-A1530U-EJ72AA include circular DIN connectors and an IEC metric mounting flange.

MPL-A1530U-VJ74AA

Produced by Allen Bradley, catalog number MPL-A1530U-VJ74AA is a low-inertia servo motor with a 200-volt rating. The frame of this unit measures 63 millimeters, and the magnet stack measures 3.0 inches. The MPL-A1530U-VJ74AA has a rated speed of 7000 rev/min. Features of this servo motor include a multi-turn encoder, a mounting flange, circular DIN connectors, and a 24-volt direct current (DC) brake.

MPL-A220F-V-X210

Product number MPL-A220F-V-X210 was manufactured by Allen Bradley, and it is classified as a replacement motor for Kinetix MPAR electric cylinders. The voltage rating of this motor is 200 volts. Additionally, the rated speed of this replacement motor is 3000 r/min. The MPL-A220F-V-X210 has a 75-millimeter frame. This product also has a 2.0-inch magnetic stack length. The output of this motor is rated as 0.6 kilowatts.

MPL-A220T-EJ72AA

Catalog number MPL-A220T-EJ72AA, which was produced by Allen Bradley, is a low inertia servo motor with a 200-volt AC voltage rating. This device has a 75 mm frame, as well as a 2.0-inch long magnetic stack. The MPL-A220T-EJ72AA servo motor operates at speeds rated as 6000 rev/min. For feedback, this unit has an integrated single-turn encoder that has a high resolution. The MPL-A220T-EJ72AA servo motor can be mounted via the use of the installed flange mount.

MPL-A220T-EJ74AA

Designed by Allen Bradley, catalog number MPL-A220T-EJ74AA is an MP-series low-inertia servo motor with a 200-volt rating. This device has a 75-millimeter frame, as well as a 2.0-inch-long magnet stack. The MPL-A220T-EJ74AA servo motor can operate at speeds rated up to 6000 r/min. For feedback purposes, this servo motor features a single-turn encoder. Additionally, the MPL-A220T-EJ74AA has an integrated 24-volt DC brake.

MPL-A220T-VJ74AA

Manufactured by Allen Bradley, catalog number MPL-A220T-VJ74AA is an MP-series servo motor with low inertia and a 200-volt rating. This device has a 75-millimeter frame, in addition to a 2.0 in. magnetic stack. The speed at which the MPL-A220T-VJ74AA operates is rated as 6000 revolutions per minute. For feedback purposes, this product features a multi-turn encoder. A 24-volt DC brake is integrated into the design of the MPL-A220T-VJ74AA.

MPL-A230P-EJ72AA

Product number MPL-A230P-EJ72AA is a low-inertia servo motor with a 200-volt rating. It was produced by Allen Bradley as part of the MP series of servo motors. The rated operating speed of this motor is 5000 rev/min. It has a frame size of 75 mm and a magnetic stack length of 3.0 inches. The MPL-A230P-EJ72AA features a single-turn encoder for feedback. This motor can be mounted via the use of a mounting flange.

MPL-A230P-EJ74AA

The MPL-A230P-EJ74AA from Allen Bradley is an MP-series servo motor. This unit has low inertia and a 200-volt rating. This unit has a 75-millimeter frame, as well as a 3.0-inch-long magnetic stack. The rated operating speed of this motor is 5000 revolutions per minute. The MPL-A230P-EJ74AA features a single-turn encoder for feedback purposes. This servo motor also features a 24-volt DC brake. The MPL-A230P-EJ74AA can be mounted via a mounting flange.

MPL-A230P-HJ72AA

The MPL-A230P-HJ72AA servo motor was designed and produced by Allen Bradley. Belonging to the MP series of servo motors, this product has low inertia and a voltage rating of 200 volts AC. The MPL-A230P-HJ72AA has a 75-millimeter frame, as well as a 3.0-inch magnetic stack. This servo motor operates at speeds rated up to 5000 r/min. For feedback purposes, the MPL-A230P-HJ72AA features a 2000-line encoder. This motor can be mounted by using a mounting flange.

MPL-A230P-VJ74AA

Part number MPL-A230P-VJ74AA is a low-inertia servo motor produced by Allen Bradley. This motor belongs to the MP series of motors, and it has a 200-volt AC voltage rating. The MPL-A230P-VJ74AA has a 75 mm frame, in addition to a 3.0 in. magnetic stack length. The rated speed of this servo motor is 5000 rev/min. For feedback, this servo motor features a multi-turn encoder with high resolution. This unit has circular DIN connectors, a 24-volt DC brake, and a flange for mounting.

MPL-A320P-H-X229

Product number MPL-A320P-H-X229 is a low-inertia servo motor with premium permanent magnets. The voltage rating of the MPL-A320P-H-X229 is 200 volts alternating current (AC) with a current rating of 9 amperes. Additionally, the speed that this motor operates at is rated as 5000 revolutions per minute. It has a 100-millimeter frame and can be mounted via a flange mount.

MPL-A420F-M-X213

Manufactured by Allen Bradley, part number MPL-A420F-M-X213 is a replacement motor for MPAR-series electric cylinders. This unit has a 200-volt voltage rating. The MPL-A420F-M-X213 has a 2-kilowatt output rating and a 3000 rpm speed rating. The MPL-A420F-M-X213 is equipped with an enclosure that has an IP50 protection rating.

MPL-B1510V-VJ72AA

Catalog number MPL-B1510V-VJ72AA is a low-inertia servo motor with a rated speed of 8000 revolutions per minute. This unit is a product of Allen-Bradley, and it belongs to the MP series of servo motors. The MPL-B1510V-VJ72AA has a 400 VAC voltage rating. This motor's frame measures 63 millimeters, and its magnetic stack has a length of one inch. The MPL-B1510V-VJ72AA includes a multi-turn high-resolution encoder for feedback purposes.

MPL-B1520F-V-X216

The MPL-B1520F-V-X216 is a servo motor from Allen-Bradley / Rockwell Automation. It belongs to the MPL series of servo motors. Its frame size is 215 millimeters, and its magnet stack length is 2 inches. The voltage rating of the MPL-B1520F-V-X216 is 460 volts AC. Additionally, the speed rating of this unit is 3000 revolutions per minute.

MPL-B1520U-EJ72AA

The MPL-B1520U-EJ72AA is an Allen Bradley low-inertia brushless servo motor. This device belongs to the MPL series of premium rotary servo motors. The voltage rating of this motor is 400 volts AC. Additionally, the operating speed of the MPL-B1520U-EJ72AA is 7000 RPM. This low-inertia servo motor features circular DIN connectors. It can be mounted via the use of a mounting flange.

MPL-B1520U-HJ74AA

The MPL-B1520U-HJ74AA servo motor is a product of Allen Bradley. This device is utilized in a wide array of applications for factory automation. It has low inertia and a speed rated at 7000 rev/min. For feedback purposes, the MPL-B1520U-HJ74AA includes a 2000 line encoder. This unit also includes a 24-volt DC brake.
Previous 1

...

9 10 11 12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP