GE / IP FANUC Series 90/30 In Stock

Email

sales@automationstop.com

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Allen Bradley - Motors

MPL Servo Motors

The MPL series consists of low-inertia rotary servo motors with premium permanent magnets that are manufactured by Allen-Bradley. These servo motors are designed to fulfill the stringent requirements of various motion systems. The MP-series motors come with a mounting pilot to help operators mount the motor in a system. These motor units have a high torque-to-size ratio, innovative winding technology, good torque performance, rapid acceleration, and the ability to operate with a sustained shaft load. They are appropriate for use in a variety of industries and applications, including handling of materials, automotive, and conversion-type applications. Winding insulating materials are used in each MPL servo motor to improve thermal management. The installation adheres to all local rules and installation standards that improve safety and electromagnetic compatibility, and its IP66 protection ensures protection from strong jet water sprays and dust particles. The working temperature ranges from 0 to 40 degrees Celsius. MPL servo motors are offered in nine frame sizes that range from 63 and 75-millimeter frames to larger frames measuring 100 to 300 millimeters. High-energy rare-earth magnets are used in the MPL servo motors. This series of motors have power ratings ranging from 0.16 to 18.6 kilowatts, with some producing a speed of up to 8000 revolutions per minute (rev/min). Two-pole resolvers, 2000-line encoders, multi-turn encoding systems, and single-turn encoders using the Hiperface encoder protocol are among the available feedback options. Single-turn or multi-turn high-resolution encoders are standard on MP-series low-inertia motors. MPL motors are designed for use with Allen-Bradley controllers. The MP series has motors rated at 200 and 400 volts.

MPL Servo Motors

MPL (Low Inertia) servo motors from Allen Bradley are highly efficient and compact motors that are used for applications that demand motion sensitivity owing to significantly low rotor inertia. These motors have a high torque density (torque with respect to either weight or volume). These motors are brushless and are available in 9 different frame sizes. Premium permanent magnet is used in the construction of these motors. These servo motors are used with a range of Allen Bradley drive series (discussed later). MPL servo motors are ideally used for applications like assembling electronic components, packaging, material handling in different industries, automotive, and metal forming industries.

Mechanical and Electrical Specifications

Rotor and Rotor Magnets

MP Low Inertia servo motors are brushless AC motors. These motors are synchronous motors (recall the fact that magnet is present, no need for induction). For rotor flux production, their rotors are equipped with rare earth magnets which are premium in quality, and high in energy. These magnets pave way for quicker acceleration. Magnets on the rotors of MPL servo motors might have 8 different stack lengths (1 inch to 8 inch and corresponding codes as multiples of 10).

Rotors of these motors have threaded holes at their shaft end.

Stator Winding

Stator winding, which hugely decides the weight of the machine, is the major factor in determining torque and power density. To keep torque and power density high in MPL servo drives, stator winding is also made using innovative technology, and quality material is used for insulating this winding. Powerful rotor magnets and advanced stator windings make this motor provide 40% more torque (w.r.t. size) than conventional motors. This stator winding is also helpful in better heat management.

Motor Connectors and Cables

MPL servo motors can either have a connector that is a circular bayonet, and it faces a shaft (code 2) or these motors could come with a DIN connector that can rotate up to 180 degrees for ease of use. This connector is SpeedTec circular connector (code 7).

MPL servo motors also have brake (or power) connectors and feedback connectors as motion-sensitive applications need them. The supplier of this product will not provide auxiliary feedback, motor feedback, and I/O connector kits as accessories to the buyer.

Cables provided by the factory manufacturer will have standard length. These cables have appropriate sealing to ensure that the motor achieves promised environmental ratings as well as shield termination. These cables meet specifications and requirements of the following standards: NFPA 79 (National Fire Protection Association code 79) compliant, DESINA cable jacket coloring, tray cable rating, 600V insulation rating, RoHS and REACH, UL-Listed. Customers can also go with the option of designing their cables. For this purpose, kits are made available by Rockwell Automation. The construction of the cable would also affect the Electromagnetic Compatibility (EMC) of the system so extreme care is needed while constructing the cable. Shield of either type of cable would need grounding; it could be hazardous otherwise.

Allen Bradley directs its user that connector housings in the case of M40 and M23 can be rotated to make connector placement in a rearward direction. While connector housings for M58 must be removed physically and placed back in 90 degrees increments.

Shaft Seal

Not all servo motors of the MP Low inertia series come with a shaft seal. The user has to decide if, for some applications and the environment, a shaft seal is needed or not. The shaft seal will ensure that dust particles and moisture content does not enter motor bearings. Moreover, the type of use will also determine the frequency or duration of maintenance and replacement of shaft seals because these wear with time. Allen Bradley recommends users of these motors to inspect and maintain this component regularly – typically every 3 months but not to go beyond 12 months.

For these servo motors, nitrile is used to build shaft seals. For smooth operation of the shaft seal, a lubricant is included in the accessories package. To lubricate the shaft seal, the use of a shaft seal kit is recommended provided by Rockwell Automation. For different servo motors in the MPL series, different shaft seal kits are available, e.g., for motor catalog numbers MPL-A15xx and MPL-B15xx, the shaft seal kit with catalog number MPL-SSN-F63F75 is recommended, while for motor catalog numbers MPL-A3xx and MPL-B3xx, the shaft seal kit with the catalog number MPL-SSN-A3B3 is suggested, and so on. Furthermore, Rockwell Automation recommends its users use its shaft seals. If the owner uses shaft seals from any other company, then any sort of warranty (implied or direct) is not entertained by Rockwell Automation.

The presence or absence of a shaft seal will also determine which standards the product will comply with (discussed later in detail).

Mounting Dimensions

For MPL servo motors, the IEC72-1 standard for rotating electrical machines is complied with while making mounting dimensions. Indirectly, it covers frame numbers all from 56 to 400 and flange numbers ranging between 55 and 1080. Their mounting flanges have free mounting holes of type FF.

Frame Sizes

Allen Bradley has used novel design techniques (e.g. while designing stator winding, choosing winding insulation, placement of magnets, choice of magnets, etc.) to keep the size of MPL servo motors as low as possible. As mentioned, motors from this series of Allen Bradley products are available in nine different frame sizes – all being compact and sturdy. These frame sizes and the corresponding codes are as follows:

  • Code 15 indicates a frame size of 63 mm
  • Code 2 indicates a frame size of 75 mm
  • Code 3 indicates a frame size of 100 mm
  • Code 4 indicates a frame size of 115 mm
  • Code 45 indicates a frame size of 130 mm
  • Code 5 indicates a frames size of 165 mm
  • Code 6 indicates a frame size of 215 mm
  • Code 8 indicates a frame size of 265 mm
  • Code 9 indicates a frame size of 300 mm

Encoders and Feedback

Servo motors from the MPL series are used for those motion applications which require high performance. High-resolution encoders are also there to determine the accurate position of the rotor. Thus, these motors have efficient high-resolution feedback systems. This feedback could be either single turn (-E and –S) or multi-turn (-V and -M) through the encoder. In single turn feedback systems, the absolute position of the rotor is fed back to the controller in just one turn while maintaining high resolution. On the other hand, 4096 turns are needed to provide high-resolution feedback in multi-turn encoder systems. This feedback would also be the absolute position of the motor rotor.

 Motors with the –M and –S code can make up to two million counts in one revolution while motors with code –E and –V give up to two hundred and sixty counts in one revolution – all giving smooth performance.

Motors in the MPL series also have the option of an incremental encoder (with Code ‘H’) and resolver (with code ‘R’).

Brake Availability

MPL servo motors could either have a 24V DC brake (code 4) or no brake at all (code 2). If the brake is present, it will keep the motor shaft still or hold it at 0rpm (revolutions per minute) unless applied torque remains below the rated holding torque for the brake. Anyhow, this brake is not to bring the motor to a stop.

For disengaging this brake, a separate power source is needed. This power can be provided by a servo motor controller or an operator control which could be manual.

On-board Memory for Commissioning

To know motor parameters, the system doesn’t need to perform commissioning of these MPL servo motors from scratch. Instead, these motors are equipped with a memory unit to store the identity of the motor. So, upon startup, the system could identify motor, and commissioning time could be reduced significantly.

Voltage Class

Motors from the MPL series are grouped into two classes based on operating voltage: 200V class and 400V class. In the catalog number MPL-xxxxxx-xx7xAA, the first 'x' is to distinguish between voltage classes. Because of two options for voltage, A is for 200V class of motors and B is that for 400V class motors.

Compatibility for Drives

The motor, being the crucial part of a drive system, needs to be designed while considering application requirements and characteristics of other components in the drive system. In other words, the motor’s compatibility with the drive should be kept in mind. MP Low inertia servo motors are compatible with the following Allen Bradley drive systems: Kinetix 5500, Kinetix 6200, Kinetix 6500, Kinetix 6000, Kinetix 300, Kinetix 350, Kinetix 2000, Kinetix 7000, and Ultra3000.

Torque Output

Servo motors from the MPL series give its users a wide range of options for torque. Different motors from this series are capable of providing continuous stall torque in the range of 0.26 to 163Nm while peak stall torque goes up to 278Nm (e.g. catalog number MPL-B980B) starting from 0.77Nm (e.g. catalog number MPL-A1510V). Servo motors in MP Low inertia series give 40% higher torque output than that of other servo motors of the same size.

Speed Output

Servo motors of the MP Low Inertia series can attain speed up to 8000 rpm (revolutions per Minute). Other available options for rated speeds and respective codes are given below.

  • Code B indicates a rated speed of 1000 rpm
  • Code C indicates a rated speed of 1500 rpm
  • Code D indicates a rated speed of 2000 rpm
  • Code F indicates a rated speed of 3000 rpm
  • Code H indicates a rated speed of 3500 rpm
  • Code J indicates a rated speed of 3750 rpm
  • Code K indicates a rated speed of 4000 rpm
  • Code P indicates a rated speed of 5000 rpm
  • Code Y indicates a rated speed of 6000 rpm
  • Code U indicates a rated speed of 7000 rpm
  • Code V indicates a rated speed of 8000 rpm

Power Output

Like torque, motors in MP Low inertia series have higher power density as well. Rated output (in kW) at respective rated speed can go up to 18.6kW (e.g., motor catalog number MPL-B980D) starting from a small figure of 0.16kW (e.g., motor catalog number MPL-A1510V).

Environmental Specifications

Rockwell Automation has made low inertia servo motors of the MPL series compatible with IP50 or IP66 depending upon the absence or presence of a shaft seal. If there is no shaft seal then the motor follows the IP50 standard minimum (typically IP50 if the shaft is mounted in an upward direction, IP51 if the shaft is installed in a horizontal direction, and IP53 if the shaft is installed in a downward direction). If there is a shaft seal (optional) then the IP66 standard is mandatory (so concerned equipment becomes dust and drip-free). Furthermore, the manufacturer binds its users to use those cable connectors which are environmentally sealed.

As far as the operating temperature is concerned, these servo motors are recommended to be used in the locality where the temperature ranges between 0 and 40 degrees centigrade. Anyhow, storage temperature can range between -30 and 70 degrees centigrade. If the temperature doesn’t remain within prescribed limits, then the owner must make arrangements for enough clearance, airflow, and heatsink.

While storing it must be ensured that the atmosphere is noncorrosive. Relative humidity at the storage site could be anywhere between 5 and 95% noncondensing.

Thermal Management

MPL series servo motors are designed to be smaller in size which complicates the heat management system. But advanced winding techniques, winding insulation, and winding material make this motor thermally efficient. Moreover, the presence of magnets instead of another winding also makes these motors more efficient thermally. During the designing process, heat transfer is also paid heed to. Anyhow, the manufacturer suggests not enclosing the motor except in situations when a forced-air mechanism is used to cool down the motor. It is also suggested that no such devices are placed near motors that produce heat. Aluminum heatsinks can also be used to dissipate heat more efficiently.

Certifications

MP Low inertia servo motors are components that are UL Recognized to corresponding CSA and UL standards. These servo motors are also CE marked for all applicable directives.

Other Products of the MP Series

Low inertia motors are regarded as one product of the MP series, as there are two more products of the MP series as well. These are MP series food-grade motors and stainless-steel motors. These two types of products are designed to meet some extra application requirements.

MP series food grade motors mainly possess characteristics of MP Low inertia motors but they also meet additional requirements of food and beverage related applications e.g. packaging. These motors are designed to have better sealing and food-grade coatings so they could be used near food items. Similarly, MP series stainless steel motors are designed to work in hygienic environments. These motors can be used safely in dairy and poultry-related applications where there could be a corrosive atmosphere or high pressure. These motors are ensured to be leakproof and they are factory sealed to achieve this purpose.

Browse our selection of MPL Servo Motors units

AutomationStop.com's online catalog offers one of the largest selections of preowned MPL Servo Motors units in the world.

MPL-A520K-MK22AA

Catalog number MPL-A520K-MK22AA is an Allen Bradley servo motor. This unit has low inertia and a 200-volt rating. The frame of this device measures 165 millimeters. Additionally, its magnet stack measures 2.0 inches. The MPL-A520K-MK22AA operates at speeds rated up to 4000 rpm. This servo motor includes a high-resolution encoder that provides feedback in multiple turns. The MPL-A520K-MK22AA can be mounted via the use of a flange.

MPL-A520K-MK72AA

Part number MPL-A520K-MK72AA is a servo motor manufactured by Allen Bradley. This device has a 165 mm frame, in addition to a 2.0 in. magnet stack. The MPL-A520K-MK72AA has a voltage rating of 200 volts and a speed rating of 4000 rpm. Feedback is provided to the servo motor via a multi-turn encoder. The connectors of the MPL-A520K-MK72AA are circular DIN connectors.

MPL-A520K-SJ22AA

Produced by Allen Bradley, product number MPL-A520K-SJ22AA is a 200-volt servo motor with low inertia. This device has a frame measuring 165 millimeters, along with a magnetic stack measuring 2.0 inches. The speed at which the MPL-A520K-SJ22AA servo motor operates is rated up to 4000 rev/min. This Allen Bradley product has a single-turn encoder, which is typically used to provide feedback. The MPL-A520K-SJ22AA can be mounted using a mounting flange.

MPL-A520K-SJ72AA

A product of Allen Bradley, catalog number MPL-A520K-SJ72AA is a low-inertia servo motor with a 200 VAC voltage rating. This product has a frame that measures 165 millimeters. Additionally, it has a magnetic stack that measures 2.0 inches. The MPL-A520K-SJ72AA servo motor has a rated operational speed of 4000 rpm. For feedback purposes, this servo motor features a single-turn encoder. The MPL-A520K-SJ72AA was designed to be suitable for various applications that require speed and/or position control.

MPL-A520K-SK22AA

Produced by Allen Bradley, part number MPL-A520K-SK22AA is a low-inertia servo motor. This motor has a 4000 rpm rated speed, in addition to a 200-volt rated voltage. This product has a 165-millimeter frame, in addition to a 2.0-inch magnet stack. Feedback is provided to the MPL-A520K-SK22AA via a single-turn encoder. This servo motor can be mounted via the use of a mounting flange.

MPL-A520K-SK72AA

Part number MPL-A520K-SK72AA is a 200-volt, low-inertia servo motor manufactured by Allen Bradley. This unit has a 165-millimeter-sized frame. It also has a 2.0-inch-long magnetic stack. The MPL-A520K-SK72AA operates at speeds rated at 4000 r/min. An encoder provides feedback to the MPL-A520K-SK72AA in a single turn. This product features circular DIN connectors. In addition, it can be mounted via the use of a mounting flange.

MPL-A540F-MJ74AA

The MPL-A540F-MJ74AA servo motor is a product of Allen Bradley/Rockwell Automation. This motor has low inertia, and it has a 200 VAC voltage rating. The frame of this product measures 165 millimeters. Additionally, the magnet stack of this servo motor measures 4.0 inches. The MPL-A540F-MJ74AA operates at speeds rated up to 3000 rev/min. For feedback purposes, this device features a multi-turn encoder. The MPL-A540F-MJ74AA has circular DIN connectors, as well as a 24 VDC brake.

MPL-A540K-MJ22AA

Part number MPL-A540K-MJ22AA is a low-inertia servo motor from Allen Bradley/Rockwell Automation. This device has a voltage rating of 200 VAC, in addition to a speed rating of 4000 rpm. The MPL-A540K-MJ22AA has a 165-millimeter frame and a 4.0-inch magnet stack. This product includes a high-resolution encoder that provides feedback in multiple turns. The MPL-A540K-MJ22AA can be mounted using a mounting flange.

MPL-A540K-MJ24AA

The Allen Bradley MPL-A540K-MJ24AA servo motor has low inertia and a 200-volt AC rating. This unit belongs to Allen Bradley's MP series of servo motors. It has a 165-millimeter frame and a 4.0-inch magnetic stack. The MPL-A540K-MJ24AA servo motor operates at speeds rated up to 4000 revolutions per minute. For feedback purposes, this motor has a multi-turn high-resolution encoder. In addition to that, the MPL-A540K-MJ24AA has a 24-volt DC brake and circular bayonet connectors.

MPL-A540K-MJ72AA

Catalog number MPL-A540K-MJ72AA is an Allen-Bradley low-inertia servo motor from the MP product line. This motor has a 200 VAC rating and operates at 4000 r/min. The frame size of this product measures 165 millimeters, and the magnetic stack length measures four (4.0) inches. The MPL-A540K-MJ72AA has a built-in multi-turn encoder for feedback purposes. This unit has circular DIN connectors and an IEC metric flange for mounting. The MPL-A540K-MJ72AA servo motor is suitable for applications that require motion and/or position control.

MPL-A540K-MJ74AA

Product number MPL-A540K-MJ74AA is a low-inertia servo motor with a 200-volt AC voltage rating. The frame of this motor measures 165 millimeters. Additionally, the magnet stack of the MPL-A540K-MJ74AA measures 4.0 inches. This servo motor has a rated speed of 4000 revolutions per minute. The MPL-A540K-MJ74AA has a multi-turn encoder, a 24-volt DC brake, and circular DIN connectors. This servo motor can be mounted via the use of a mounting flange.

MPL-A540K-MK22AA

The Allen Bradley MPL-A540K-MK22AA is a low-inertia servo motor rated at 200 volts alternating current (AC). This unit features a multi-turn encoder for feedback purposes, a flange for mounting purposes, and circular bayonet connectors. The MPL-A540K-MK22AA has a 165-millimeter frame, in addition to a 4.0-inch magnet stack length. This servo motor operates at speeds rated up to 4000 revolutions per minute.

MPL-A540K-MK24AA

Part number MPL-A540K-MK24AA is an Allen-Bradley/Rockwell Automation servo motor with low inertia. The rated voltage of this servo motor is 200 volts alternating current (AC). The frame of the MPL-A540K-MK24AA measures 165 millimeters, while the magnetic stack measures 4.0 inches. The rated speed of this product is 4000 r/min. This servo motor has a high-resolution encoder that provides absolute position feedback in multiple turns. The MPL-A540K-MK24AA also has a brake rated at 24 volts direct current (DC).

MPL-A540K-MK72AA

Catalog number MPL-A540K-MK72AA from Allen-Bradley is a low-inertia, 200-volt servo motor. The size of this motor's frame measures 165 millimeters. Additionally, the length of the MPL-A540K-MK72AA's magnetic stack measures 4.0 inches. The rated speed of this servo motor is 4000 r/min. For feedback purposes, the MPL-A540K-MK72AA features a multi-turn high-resolution encoder. This product has circular DIN connectors.

MPL-A540K-MK74AA

The MPL-A540K-MK74AA servo motor is a product of Allen Bradley/Rockwell Automation. This unit has a rated voltage of 200 VAC, a rated speed of 4000 rpm, and low inertia. The frame size of the MPL-A540K-MK74AA is 165 millimeters, and the magnetic stack length is four (4.0) inches. The MPL-A540K-MK74AA has a multi-turn encoder for feedback purposes. This servo motor also has circular DIN connectors and a 24 VDC brake. This motor can be mounted via the use of a mounting flange.

MPL-A540K-SJ22AA

Part number MPL-A540K-SJ22AA is a servo motor. This motor belongs to the MP series of servo motors produced by Allen Bradley. The rated voltage/voltage class of this servo motor is 200 volts alternating current (AC). This unit features a 165-millimeter frame, in addition to a 4.0-inch long magnetic stack. The speed that this motor operates at is rated as 4000 revolutions per minute. The featured connector of this unit is a circular bayonet that faces the MPL-A540K-SJ22AA's shaft. This motor may be mounted with the use of a flange mount.

MPL-A540K-SJ24AA

Part number MPL-A540K-SJ24AA is an Allen-Bradley servo motor with a rated voltage of 200 volts AC. This motor also has low inertia. The frame size of the MPL-A540K-SJ24AA is 165 millimeters. In addition, the length of its magnetic stack is 4.0 inches. The MPL-A540K-SJ24AA servo motor has a rated operating speed of 4000 rev/min. A multi-turn high-resolution encoder has been integrated into the design of this servo motor for feedback purposes. The MPL-A540K-SJ24AA has a brake rated at 24 volts DC.

MPL-A540K-SJ72AA

Catalog number MPL-A540K-SJ72AA is a servo motor belonging to Allen-Bradley's MP series of servo motors. This unit has a 200 VAC voltage rating and low inertia. The frame of this motor measures 165 mm, and its magnetic stack measures 4.0 in. The MPL-A540K-SJ72AA operates at speeds rated up to 4000 revolutions per minute. This servo motor includes a single-turn encoder for feedback purposes. The MPL-A540K-SJ72AA also includes circular DIN connectors.

MPL-A540K-SJ74AA

The MPL-A540K-SJ74AA servo motor from Allen Bradley has a 200-volt AC rating and low inertia. This unit belongs to the MP servo motor series. The size of this product's frame is 165 millimeters. Additionally, the length of this motor's magnet stack is four (4.0) inches. The MPL-A540K-SJ74AA has an operating speed rated up to 4000 rev/min. This servo motor includes a 24-volt DC brake and a single-turn high-resolution encoder.

MPL-A540K-SK22AA

The MPL-A540K-SK22AA servo motor from Allen Bradley / Rockwell Automation has low inertia. The rated voltage of this unit is 200 volts, and the rated speed is 4000 rev/min. The MPL-A540K-SK22AA has a frame measuring 165 millimeters, in addition to a magnet stack with a length measuring 4.0 inches. This motor has a high-resolution encoder that provides feedback in a single turn. It also has circular bayonet connectors. The MPL-A540K-SK22AA can be mounted via the use of a mounting flange.

MPL-A540K-SK24AA

The MPL-A540K-SK24AA servo motor from Allen-Bradley/Rockwell Automation has low inertia with a voltage rating of 200 VAC. The frame size of this product is 165 millimeters, and the magnetic stack length is 4.0 inches. The MPL-A540K-SK24AA has a rated operational speed of 4000 revolutions per minute. Feedback is provided to this motor via a single-turn encoder. The MPL-A540K-SK24AA includes an integrated brake rated at 24 VDC.

MPL-A540K-SK72AA

Product number MPL-A540K-SK72AA is a 200-volt, low-inertia servo motor produced by Allen Bradley/Rockwell Automation. The frame size of the MPL-A540K-SK72AA is 165 millimeters, and the magnetic stack length is 4.0 inches. This motor operates at a maximum speed of 4000 revolutions per minute. A single-turn encoder is utilized by this servo motor for feedback purposes. The MPL-A540K-SK72AA possesses circular DIN connectors that are orientated at a 90-degree angle and can be rotated up to 180 degrees. This servo motor can be mounted via a mounting flange.

MPL-A540K-SK74AA

Catalog number MPL-A540K-SK74AA is an Allen Bradley servo motor. This motor has low inertia, as well as a voltage rating of 200 volts alternating current (AC). The frame size of the MPL-A540K-SK74AA servo motor measures 165 millimeters. Additionally, its magnetic stack measures 4.0 inches. Feedback is provided to this product via a single-turn high-resolution encoder. The MPL-A540K-SK74AA is equipped with a 24-volt direct current (DC) brake.

MPL-A560F-MJ22AA

Catalog number MPL-A560F-MJ22AA is a 200V MP-series servo motor that was produced by Allen Bradley. This product has a frame size measuring 165 mm, a magnetic stack length measuring 6.0 in., and a 3000 rpm rated speed. For feedback, the MPL-A560F-MJ22AA includes a multi-turn encoder with high resolution. This motor includes a shaft key, though it does not include a shaft seal. Additionally, the MPL-A560F-MJ22AA does not have brake integrated in its design.

MPL-A560F-SJ22AA

The Allen-Bradley MPL-A560F-SJ22AA servo motor has low inertia, as well as a voltage rating of 200 volts. Additionally, the operational speed of this motor is rated up to 3000 revolutions per minute. The MPL-A560F-SJ22AA has a frame size of 165 millimeters. This unit also has a 6.0-inch-long magnetic stack. Feedback is provided to this servo motor via a single-turn encoder. The MPL-A560F-SJ22AA can be flange mounted.

MPL-A560F-SJ72AA

Part number MPL-A560F-SJ72AA was designed and produced by Allen-Bradley. This unit is classified as a low-inertia servo motor. It has a 200-volt rated voltage, as well as a 3000 rpm rated speed. The MPL-A560F-SJ72AA has a frame measuring 165 millimeters. Additionally, the length of this motor's magnetic stack measures 6.0 inches. This servo motor is provided feedback via a single-turn high-resolution encoder. The MPL-A560F-SJ72AA can be mounted via the use of a flange mount.

MPL-B1510V-VJ42AA

The MPL-B1510V-VJ42AA servo motor from Allen Bradley/Rockwell Automation has a voltage rating of 400 volts. This motor also has low inertia. The frame of the MPL-B1510V-VJ42AA measures 63 mm and the magnetic stack measures 1.0 in. This servo motor operates at speeds rated up to 8000 rev/min. The MPL-B1510V-VJ42AA includes a multi-turn high-resolution encoder for feedback, as well as an IEC metric flange for mounting.

MPL-B1510V-VJ44AA

The MPL-B1510V-VJ44AA servo motor from Allen-Bradley has low inertia and a voltage rating of 400 volts alternating current (AC). The frame of this device measures 63 millimeters, and the magnetic stack measures one (1.0) inch. The MPL-B1510V-VJ44AA operates at speeds of up to 8000 r/min. For feedback, this servo motor includes a multi-turn high-resolution encoder. It has a 24-volt direct current (DC) brake and a mounting flange.

MPL-B1510V-VJ74AA

Catalog number MPL-B1510V-VJ74AA is a low-inertia servo motor designed by Allen Bradley. This product has a rated voltage of 400 volts. The MPL-B1510V-VJ74AA has a 63-millimeter frame, as well as a 1.0-inch magnetic stack. This product operates at speeds of up to 8000 rev/min. For feedback purposes, the MPL-B1510V-VJ74AA features a multi-turn high-resolution encoder. This motor also features a 24-volt DC brake and a mounting flange.

MPL-B1520U-EJ44AA

A product of Allen Bradley, the MPL-B1520U-EJ44AA servo motor has low inertia and a 400-volt rating. This unit has a 63-millimeter frame and a 2.0 magnet stack. This servo motor operates at a 7000 rev/min rated speed. The MPL-B1520U-EJ44AA includes a single-turn encoder for feedback purposes. This servo motor also includes a 24-volt direct current (DC) brake and a mounting flange.

MPL-B1520U-VJ42AA

Part number MPL-B1520U-VJ42AA is an MP-series low-inertia servo motor rated at 400 volts. This unit operates at speeds of up to 7000 rev/min. It has a 63-millimeter frame and a 2.0-inch-long magnetic stack. For feedback, this servo motor includes a high-resolution multi-turn encoder. The MPL-B1520U-VJ42AA may be mounted via the use of a mounting flange.

MPL-B1520U-VJ44AA

The MPL-B1520U-VJ44AA is an AC servo motor manufactured by Allen Bradley / Rockwell Automation. It has a 7000 RPM-rated speed, making it one of the most powerful motors in the rotary servo motor family. It operates at a voltage rated at 400 VAC, and it has a 63 mm frame and 2 in. magnetic stack. The MPL-B1520U-VJ44AA has three connectors, a shaft key, an IEC metric mounting flange, and a 24-volt DC brake.

MPL-B1530U-EJ42AA

The MPL-B1530U-EJ42AA is an AC servo motor with a rated speed of 7000 rpm. This unit belongs to the MPL Series and was designed by Allen Bradley. The MPL-B1530U-EJ42AA has low inertia. It has a single-turn high-resolution encoder, a shaft key, an IEC metric mounting flange, and a magnetic stack measuring 3 inches. This unit's voltage class is 400 volts AC.

MPL-B1530U-EJ44AA

Catalog number MPL-B1530U-EJ44AA is a low-inertia servo motor designed by Allen Bradley. This unit has a 400-volt voltage rating, in addition to a 7000 rpm speed rating. The frame of this servo motor measures 63 millimeters. Additionally, its magnetic stack has a length of 3.0 inches. The MPL-B1530U-EJ44AA servo motor includes a single-turn encoder for feedback purposes. This product also includes a 24-volt direct current (DC) brake. This servo motor is suitable for use in applications requiring speed and motion control.

MPL-B1530U-EJ72AA

Part number MPL-B1530U-EJ72AA is a servo motor with low inertia. This motor was produced by Allen Bradley as part of the MP series of servo motors. This unit has a 400-volt AC voltage rating. The frame of this motor measures 63 millimeters, and the length of the magnetic stack measures 3.0 inches. Seven thousand (7000) rpm is the rated speed of the MPL-B1530U-EJ72AA servo motor. Integrated into this motor is a single-turn encoder which is utilized for feedback purposes. The MPL-B1530U-EJ72AA can be mounted via the use of a flange mount.

MPL-B1530U-HJ42AA

Produced by Allen Bradley, catalog number MPL-B1530U-HJ42AA is an MP-series low-inertia servo motor. This motor is rated at 400 volts. Additionally, it operates at 7000 revolutions per minute. The MPL-B1530U-HJ42AA has a frame size of 63 millimeters, in addition to a magnetic stack length of 3.0 inches. This unit has a 2000-line encoder for feedback. It also has circular DIN connectors.

MPL-B1530U-VJ42AA

Allen Bradley's MPL-B1530U-VJ42AA is an AC servo motor. Its frame measures 165 mm. It has a rated speed of 7000 RPM and has low inertia. It has a high-resolution multi-turn encoder.

MPL-B1530U-VJ44AA

Manufactured by Allen Bradley, part number MPL-B1530U-VJ44AA is a low inertia servo motor with a 400-volt rating. This motor is a part of Allen Bradley's MP series of servo motors. This servo motor has a frame measuring 63 millimeters. It also has a magnetic stack length measuring 3.0 inches. This unit's rated speed is 7000 revolutions per minute. The MPL-B1530U-VJ44AA can be mounted via the use of a flange mount.

MPL-B1530U-VJ72AA

Product number MPL-B1530U-VJ72AA is a low-inertia servo motor that was manufactured by Allen Bradley. This product belongs to the MP servo motor series. This unit has a voltage rating of 400 volts. It has a 63 mm frame, a 3.0 in. magnetic stack length, and a 7000 rpm speed rating. The MPL-B1530U-VJ72AA features a multi-turn encoder with high resolution. The MPL-B1530U-VJ72AA can be mounted by using a flange mount.

MPL-B210V-EJ42AA

Catalog number MPL-B210V-EJ42AA is an Allen Bradley servo motor. This unit has low inertia and belongs to the MP series of Allen Bradley servo motors. This device has a 400-volt AC rating. It has a 100 mm frame, in addition to a 1.0 in. magnetic stack length. The MPL-B210V-EJ42AA operates at a speed rated as 8000 revolutions per minute. This servo motor is equipped with a shaft key and a circular DIN connector.

MPL-B210V-HJ44AA

Produced by Allen Bradley, catalog number MPL-B210V-HJ44AA is a low-inertia servo motor with a 400 VAC rated voltage. The rated speed of this motor is 8000 rev/min. It has a 75-millimeter frame, as well as a 1.0-inch-long magnetic stack. For feedback purposes, the MPL-B210V-HJ44AA features a 2000-line encoder. This unit also features circular DIN connectors, a 24 VDC brake, and a mounting flange.

MPL-B210V-VJ42AA

Part number MPL-B210V-VJ42AA is a low-inertia servo motor with a 400-volt rating. This unit has a 75-millimeter frame, as well as a 1.0-inch magnet stack. The speed of this servo motor is rated as 8000 rpm. The MPL-B210V-VJ42AA has an encoder that provides feedback in multiple turns. This servo motor also has a mounting flange.

MPL-B220T-EJ42AA

Product number MPL-B220T-EJ42AA is a 400-volt servo motor with low inertia. This unit has a 75 mm frame, as well as a 2.0 in. magnet stack. The MPL-B220T-EJ42AA servo motor operates at speeds rated up to 6000 revolutions per minute. For feedback purposes, this device features a single-turn encoder. This product can be mounted via a mounting flange. The MPL-B220T-EJ42AA was designed to be used in applications that require motion or speed control.

MPL-B220T-EJ44AA

Manufactured by Allen-Bradley, part number MPL-B220T-EJ44AA is a 400-volt servo motor with low inertia. This unit has a 75 mm frame and a 2.0 in. magnetic stack. The speed at which this servo motor operates is rated as 6000 rev/min. For feedback purposes, the MPL-B220T-EJ44AA servo motor features a single-turn encoder. This motor also features a 24-volt direct current (DC) brake and a mounting flange.

MPL-B220T-HJ42AA

Produced by Allen Bradley, part number MPL-B220T-HJ42AA is a low-inertia servo motor with a frame size of 75 millimeters. This motor is powered via a 400-volt voltage. The rated speed of the MPL-B220T-HJ42AA is 6000 revolutions per minute. For feedback purposes, this unit features a 2000-line encoder. The MPL-B220T-HJ42AA is mounted via a flange.

MPL-B220T-VJ42AA

Catalog number MPL-B220T-VJ42AA from Allen Bradley is a 400 VAC servo motor with low inertia. This device features a 75-millimeter frame and a 2.0-inch magnetic stack. The speed rating of part number MPL-B220T-VJ42AA is 6000 rev/min. For feedback purposes, this product includes a multi-turn encoder. Additionally, the MPL-B220T-VJ42AA includes a flange for mounting purposes.

MPL-B220T-VJ44AA

Product number MPL-B220T-VJ44AA is a low-inertia servo motor with a rated speed of 6000 r/min. This unit is powered via a 400-volt input voltage supply. The frame size of the MPL-B220T-VJ44AA is 75 millimeters. For feedback purposes, this servo motor features an integrated encoder that provides feedback in multiple turns. The MPL-B220T-VJ44AA also features a 24-volt direct current (DC) brake.

MPL-B220T-VJ72AA

Catalog number MPL-B220T-VJ72AA is a low-inertia servo motor manufactured by Allen-Bradley as part of the MP line of servo motors. This unit is suitable for applications that require motion and position control. It has a 400-volt rating and operates at speeds rated up to 6000 rev/min. A multi-turn encoder was implemented into the design of the MPL-B220T-VJ72AA. This servo motor has circular DIN connectors, as well as a flange for mounting.

MPL-B230P-EJ42AA

Part number MPL-B230P-EJ42AA is a low-inertia servo motor with a 400-volt rating. This unit was produced by Allen-Bradley as part of the MP series of servo motors. The MPL-B230P-EJ42AA has a 75 mm frame, in addition to a 3.0 in. magnetic stack. This servo motor operates at speeds rated up to 5000 r/min. The MPL-B230P-EJ42AA features a single-turn encoder for feedback, as well as a flange for mounting.

MPL-B230P-EJ44AA

Product number MPL-B230P-EJ44AA, which was produced by Allen Bradley, is a 400-volt alternating current (AC) servo motor. This device has low inertia. The frame of this motor measures 75 millimeters, and its magnetic stack measures three (3.0) inches. The speed at which the MPL-B230P-EJ44AA operates is 5000 rev/min. For feedback purposes, this motor has a single-turn high-resolution encoder. This product also has a 24-volt direct current (DC) brake and a mounting flange.
Previous 1

...

4

5

6

...

12 Next

Displaying 50 of 573 results.

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP